我是靠谱客的博主 谨慎硬币,最近开发中收集的这篇文章主要介绍wifi .fw文件linux,代码阅读 - Linux\kernel\linux-5.0\drivers\staging\rtlwifi\rtl8822be\fw.h,觉得挺不错的,现在分享给大家,希望可以做个参考。

概述

/* SPDX-License-Identifier: GPL-2.0 */

/******************************************************************************

*

* Copyright(c) 2016 Realtek Corporation.

*

* Contact Information:

* wlanfae * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,

* Hsinchu 300, Taiwan.

*

* Larry Finger *

*****************************************************************************/

#ifndef __RTL8822B__FW__H__

#define __RTL8822B__FW__H__

#define USE_OLD_WOWLAN_DEBUG_FW0

#define H2C_8822B_RSVDPAGE_LOC_LEN5

#define H2C_8822B_PWEMODE_LENGTH7

#define H2C_8822B_JOINBSSRPT_LENGTH1

#define H2C_8822B_AP_OFFLOAD_LENGTH3

#define H2C_8822B_WOWLAN_LENGTH3

#define H2C_8822B_KEEP_ALIVE_CTRL_LENGTH3

#if (USE_OLD_WOWLAN_DEBUG_FW == 0)

#define H2C_8822B_REMOTE_WAKE_CTRL_LEN1

#else

#define H2C_8822B_REMOTE_WAKE_CTRL_LEN3

#endif

#define H2C_8822B_AOAC_GLOBAL_INFO_LEN2

#define H2C_8822B_AOAC_RSVDPAGE_LOC_LEN7

#define H2C_DEFAULT_PORT_ID_LEN2

/* Fw PS state for RPWM.

*BIT[2:0] = HW state

*BIT[3] = Protocol PS state, 1: register active state, 0: register sleep state

*BIT[4] = sub-state

*/

#define FW_PS_RF_ONBIT(2)

#define FW_PS_REGISTER_ACTIVEBIT(3)

#define FW_PS_ACKBIT(6)

#define FW_PS_TOGGLEBIT(7)

/* 8822B RPWM value*/

/* BIT[0] = 1: 32k, 0: 40M*/

#define FW_PS_CLOCK_OFFBIT(0) /* 32k */

#define FW_PS_CLOCK_ON0 /* 40M */

#define FW_PS_STATE_MASK(0x0F)

#define FW_PS_STATE_HW_MASK(0x07)

#define FW_PS_STATE_INT_MASK(0x3F)

#define FW_PS_STATE(x) (FW_PS_STATE_MASK & (x))

#define FW_PS_STATE_ALL_ON_8822B(FW_PS_CLOCK_ON)

#define FW_PS_STATE_RF_ON_8822B(FW_PS_CLOCK_ON)

#define FW_PS_STATE_RF_OFF_8822B(FW_PS_CLOCK_ON)

#define FW_PS_STATE_RF_OFF_LOW_PWR(FW_PS_CLOCK_OFF)

/* For 8822B H2C PwrMode Cmd ID 5.*/

#define FW_PWR_STATE_ACTIVE ((FW_PS_RF_ON) | (FW_PS_REGISTER_ACTIVE))

#define FW_PWR_STATE_RF_OFF0

#define FW_PS_IS_ACK(x) ((x) & FW_PS_ACK)

#define IS_IN_LOW_POWER_STATE_8822B(fw_ps_state)

(FW_PS_STATE(fw_ps_state) == FW_PS_CLOCK_OFF)

#define FW_PWR_STATE_ACTIVE ((FW_PS_RF_ON) | (FW_PS_REGISTER_ACTIVE))

#define FW_PWR_STATE_RF_OFF0

enum rtl8822b_h2c_cmd {

H2C_8822B_RSVDPAGE= 0,

H2C_8822B_MSRRPT= 1,

H2C_8822B_SCAN= 2,

H2C_8822B_KEEP_ALIVE_CTRL= 3,

H2C_8822B_DISCONNECT_DECISION= 4,

#if (USE_OLD_WOWLAN_DEBUG_FW == 1)

H2C_8822B_WO_WLAN= 5,

#endif

H2C_8822B_INIT_OFFLOAD= 6,

#if (USE_OLD_WOWLAN_DEBUG_FW == 1)

H2C_8822B_REMOTE_WAKE_CTRL= 7,

#endif

H2C_8822B_AP_OFFLOAD= 8,

H2C_8822B_BCN_RSVDPAGE= 9,

H2C_8822B_PROBERSP_RSVDPAGE= 10,

H2C_8822B_SETPWRMODE= 0x20,

H2C_8822B_PS_TUNING_PARA= 0x21,

H2C_8822B_PS_TUNING_PARA2= 0x22,

H2C_8822B_PS_LPS_PARA= 0x23,

H2C_8822B_P2P_PS_OFFLOAD= 024,

H2C_8822B_DEFAULT_PORT_ID= 0x2C,

#if (USE_OLD_WOWLAN_DEBUG_FW == 0)

H2C_8822B_WO_WLAN= 0x80,

H2C_8822B_REMOTE_WAKE_CTRL= 0x81,

H2C_8822B_AOAC_GLOBAL_INFO= 0x82,

H2C_8822B_AOAC_RSVDPAGE= 0x83,

#endif

H2C_8822B_MACID_CFG= 0x40,

H2C_8822B_RSSI_REPORT= 0x42,

H2C_8822B_MACID_CFG_3SS= 0x46,

/*Not defined CTW CMD for P2P yet*/

H2C_8822B_P2P_PS_CTW_CMD= 0x99,

MAX_8822B_H2CCMD

};

enum rtl8822b_c2h_evt {

C2H_8822B_DBG= 0x00,

C2H_8822B_LB= 0x01,

C2H_8822B_TXBF= 0x02,

C2H_8822B_TX_REPORT= 0x03,

C2H_8822B_BT_INFO= 0x09,

C2H_8822B_BT_MP= 0x0B,

C2H_8822B_RA_RPT= 0x0C,

MAX_8822B_C2HEVENT

};

/* H2C: 0x20 */

#define SET_H2CCMD_PWRMODE_PARM_MODE(__ph2ccmd, __val)

SET_BITS_TO_LE_1BYTE(__ph2ccmd, 0, 7, __val)

#define SET_H2CCMD_PWRMODE_PARM_CLK_REQ(__ph2ccmd, __val)

SET_BITS_TO_LE_1BYTE(__ph2ccmd, 7, 1, __val)

#define SET_H2CCMD_PWRMODE_PARM_RLBM(__ph2ccmd, __val)

SET_BITS_TO_LE_1BYTE((__ph2ccmd) + 1, 0, 4, __val)

#define SET_H2CCMD_PWRMODE_PARM_SMART_PS(__ph2ccmd, __val)

SET_BITS_TO_LE_1BYTE((__ph2ccmd) + 1, 4, 4, __val)

#define SET_H2CCMD_PWRMODE_PARM_AWAKE_INTERVAL(__ph2ccmd, __val)

SET_BITS_TO_LE_1BYTE((__ph2ccmd) + 2, 0, 8, __val)

#define SET_H2CCMD_PWRMODE_PARM_ALL_QUEUE_UAPSD(__ph2ccmd, __val)

SET_BITS_TO_LE_1BYTE((__ph2ccmd) + 3, 0, 1, __val)

#define SET_H2CCMD_PWRMODE_PARM_BCN_EARLY_RPT(__ph2ccmd, __val)

SET_BITS_TO_LE_1BYTE((__ph2ccmd) + 3, 2, 1, __val)

#define SET_H2CCMD_PWRMODE_PARM_PORT_ID(__ph2ccmd, __val)

SET_BITS_TO_LE_1BYTE((__ph2ccmd) + 3, 5, 3, __val)

#define SET_H2CCMD_PWRMODE_PARM_PWR_STATE(__ph2ccmd, __val)

SET_BITS_TO_LE_1BYTE((__ph2ccmd) + 4, 0, 8, __val)

#define SET_H2CCMD_PWRMODE_PARM_BYTE5(__ph2ccmd, __val)

SET_BITS_TO_LE_1BYTE((__ph2ccmd) + 5, 0, 8, __val)

/* H2C: 0x00 */

#define SET_H2CCMD_RSVDPAGE_LOC_PROBE_RSP(__ph2ccmd, __val)

SET_BITS_TO_LE_1BYTE(__ph2ccmd, 0, 8, __val)

#define SET_H2CCMD_RSVDPAGE_LOC_PSPOLL(__ph2ccmd, __val)

SET_BITS_TO_LE_1BYTE((__ph2ccmd) + 1, 0, 8, __val)

#define SET_H2CCMD_RSVDPAGE_LOC_NULL_DATA(__ph2ccmd, __val)

SET_BITS_TO_LE_1BYTE((__ph2ccmd) + 2, 0, 8, __val)

#define SET_H2CCMD_RSVDPAGE_LOC_QOS_NULL_DATA(__ph2ccmd, __val)

SET_BITS_TO_LE_1BYTE((__ph2ccmd) + 3, 0, 8, __val)

#define SET_H2CCMD_RSVDPAGE_LOC_BT_QOS_NULL_DATA(__ph2ccmd, __val)

SET_BITS_TO_LE_1BYTE((__ph2ccmd) + 4, 0, 8, __val)

/* H2C: 0x01 */

#define SET_H2CCMD_MSRRPT_PARM_OPMODE(__ph2ccmd, __val)

SET_BITS_TO_LE_1BYTE(__ph2ccmd, 0, 1, __val)

#define SET_H2CCMD_MSRRPT_PARM_MACID_IND(__ph2ccmd, __val)

SET_BITS_TO_LE_1BYTE(__ph2ccmd, 1, 1, __val)

#define SET_H2CCMD_MSRRPT_PARM_MACID(__ph2ccmd, __val)

SET_BITS_TO_LE_1BYTE(__ph2ccmd + 1, 0, 8, __val)

#define SET_H2CCMD_MSRRPT_PARM_MACID_END(__ph2ccmd, __val)

SET_BITS_TO_LE_1BYTE(__ph2ccmd + 2, 0, 8, __val)

/* H2C: 0x2C */

#define SET_H2CCMD_DFTPID_PORT_ID(__ph2ccmd, __val)

SET_BITS_TO_LE_1BYTE(((u8 *)(__ph2ccmd)), 0, 8, (__val))

#define SET_H2CCMD_DFTPID_MAC_ID(__ph2ccmd, __val)

SET_BITS_TO_LE_1BYTE(((u8 *)(__ph2ccmd)) + 1, 0, 8, (__val))

void rtl8822be_fill_h2c_cmd(struct ieee80211_hw *hw, u8 element_id, u32 cmd_len,

u8 *cmdbuffer);

void rtl8822be_set_default_port_id_cmd(struct ieee80211_hw *hw);

void rtl8822be_set_fw_pwrmode_cmd(struct ieee80211_hw *hw, u8 mode);

void rtl8822be_set_fw_media_status_rpt_cmd(struct ieee80211_hw *hw, u8 mstatus);

void rtl8822be_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool b_dl_finished);

void rtl8822be_set_p2p_ps_offload_cmd(struct ieee80211_hw *hw, u8 p2p_ps_state);

void rtl8822be_c2h_packet_handler(struct ieee80211_hw *hw, u8 *buffer, u8 len);

void rtl8822be_c2h_content_parsing(struct ieee80211_hw *hw, u8 c2h_cmd_id,

u8 c2h_cmd_len, u8 *tmp_buf);

bool rtl8822b_halmac_cb_write_data_rsvd_page(struct rtl_priv *rtlpriv, u8 *buf,

u32 size);

bool rtl8822b_halmac_cb_write_data_h2c(struct rtl_priv *rtlpriv, u8 *buf,

u32 size);

#

最后

以上就是谨慎硬币为你收集整理的wifi .fw文件linux,代码阅读 - Linux\kernel\linux-5.0\drivers\staging\rtlwifi\rtl8822be\fw.h的全部内容,希望文章能够帮你解决wifi .fw文件linux,代码阅读 - Linux\kernel\linux-5.0\drivers\staging\rtlwifi\rtl8822be\fw.h所遇到的程序开发问题。

如果觉得靠谱客网站的内容还不错,欢迎将靠谱客网站推荐给程序员好友。

本图文内容来源于网友提供,作为学习参考使用,或来自网络收集整理,版权属于原作者所有。
点赞(65)

评论列表共有 0 条评论

立即
投稿
返回
顶部