RT3070 imx28 SoftAP功能移植

/opt/freescale/usr/local/gcc-4.4.4-glibc-2.11.1-multilib-1.0/arm-fsl-linux-gnueabi/bin/arm-linux-strip udhcpd

1.#PATH=$PATH:/etc/apache/bin

/home/liyun/work/ltib/rpm/BUILD/linux-2.6.35.3

/home/liyun/maye9/ltib/rpm/BUILD

一：DHCP服务器端:(编译器）
1. 修改Makefile: 添加:     CROSS_COMPILE=arm-linux-

2. #make , 把生成的dhcpd文件下载到板子上.

make LDFLAGS="-static"

我编译时提示有个C文件出错，是因为文件中switch case 少了个break。
使用/usr/local/arm/2.95.3/bin/arm-linux-strip处理一下，

3. #cp samples/udhcpd.conf    /etc/                #copy udhcp/samples下的文件到目标板子的 /etc目录

4. # vi /etc/udhcpd.conf: 修改如下:

3 # The start and end of the IP lease block
4 
5 start       192.168.1.20    #default: 192.168.0.20   为winXP的ip地址范围
6 end        192.168.1.25    #default: 192.168.0.254

9 # The interface that udhcpd will use
10 
11 interface   wlan0       #default: eth 0#目标板子上的无线网卡wlan0 ，按照实际情况改写如ra0等

85 #Examles
86 opt dns 222.201.130.30 222.201.130.33   #dns服务器
87 option subnet 255.255.255.0
88 opt router 192.168.1.10                       #wlan的 ip地址,做为网关地址
89 #opt    wins    192.168.10.10              #注释掉
90 option dns 192.168.1.10 # appened to above DNS servers for a total of 3
91 option domain local
92 option lease   864000      # 10 days of seconds

5# ./dhcpd //运行dhcpd服务器

到此DHCP服务器运行成功。

 

 

二：SoftAP功能移植。

参考 http://my.oschina.net/wuying/blog/54939中博客。在此感谢分享。

/
//environment：
//       compile system：Ubantu 10.04 
//       target system：   imx28 
//       resource:            RT3070_SoftAP_v2.4.0.rar
                                   ltib --- L2.6.35_10.11.01_ER_source.tar.gz  
//       cross compile：   arm-none-linux-gnueabi-    
//ps :                           My English is the primary level(most of YouDao) --   Welcome Guidance
//reference:                http://blog.csdn.net/king_sundi/article/details/6158475 
                                    http://blog.csdn.net/linfeng999/article/details/6410224                                        
//

/compile rt3070ap///
("-" remove row, "+" add row )
$ cd 2010_0203_RT3070_SoftAP_v2.4.0.1_DPA
$ vim MODULE/Makefile
   -PLATFORM = PC
   +PLATFORM = SMDK

    ifeq ($(PLATFORM),SMDK)
    -LINUX_SRC = /home/bhushan/itcenter/may28/linux-2.6-samsung
    -CROSS_COMPILE = /usr/local/arm/4.2.2-eabi/usr/bin/arm-linux-
    +LINUX_SRC = /home/lin/Desktop/linux-2.6.35.3
    +CROSS_COMPILE = /opt/freescale/usr/local/gcc-4.4.4-glibc-2.11.1-multilib-1.0/arm-fsl-linux-gnueabi/bin/arm-none-linux-gnueabi-
     endif
$ vim NETIF/Makefile
$ vim UTIL/Makefile
  repair the same as MODULE/Makefile
 
// repair usb_buffer_free and usb_buffer_allow error
$ vim UTIL/os/linux/rt_usb_util.c
  repair following:
   #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
  void *rausb_buffer_alloc(struct usb_device *dev,
         size_t size,
         gfp_t mem_flags,
         dma_addr_t *dma)
  {
   - return usb_buffer_alloc(dev, size, mem_flags, dma);
   + return usb_alloc_coherent(dev, size, mem_flags, dma);
  }
  EXPORT_SYMBOL(rausb_buffer_alloc);  
  void rausb_buffer_free(struct usb_device *dev,
         size_t size,
         void *addr,
         dma_addr_t dma)
  {
   - usb_buffer_free(dev, size, addr, dma);
   + usb_free_coherent(dev, size, addr, dma);
  }
  EXPORT_SYMBOL(rausb_buffer_free);
  #endif // LINUX_VERSION_CODE // 
  
//repair rt3070ap: module license 'RALINK' taints kernel.
$ vim NETIF/os/linux/usb_main_dev.c
     +MODULE_LICENSE("GPL");

$ vim MODULE/common/rtmp_init.c
  repair following:
  #ifdef RTMP_MAC_USB
  - MODULE_LICENSE("RALINK");
  + MODULE_LICENSE("GPL");
  #endif // RTMP_MAC_USB //
  
  + #ifndef RTMP_MAC_USB
  + MODULE_LICENSE("GPL");
  + #endif 
  
$ sudo make ARCH=arm KBUILD_NOPEDANTIC=1

//compile dhcpd
$ cd ltib/
$ ./ltib -c

Package list  ---> 
 [*] dhcp                                                      
   [*]   Include DHCP server                             
   [*]   Include DHCP client support

$ cp rootfs/usr/sbin/dhcpd   @target rootfs/usr/local/bin/dhcpd

//configuration dhcpd/

reference google (dhcpd 配置)
example：
ddns-update-style ad-hoc;

deny client-updates;

subnet 192.168.1.0 netmask 255.255.255.0 {

default-lease-time 21600;

max-lease-time 43200;

option routers 192.168.1.1;

option subnet-mask 255.255.255.0;

option broadcast-address  192.168.1.255;

option domain-name " http://my.oschina.net/wuying";

option domain-name-servers 192.169.1.10;

option netbios-name-servers     192.168.1.10;

option www-server               192.168.1.10;

range  192.168.1.20 192.168.1.25;
}

$ mkdir -p @target rootfs/var/state/dhcp/
$ touch @target rootfs/var/state/dhcp/dhcpd.leases
  
//powerboot/
// cp *.ko to filesystem
$ tar -jxvf rootfs.tar.bz2 /tftpboot/
$ sudo make -p /tftpboot/usr/local/module
$ sudo cp MODULE/os/linux/*.ko /tftpboot/usr/local/module
$ sudo cp NETIF/os/linux/*.ko /tftpboot/usr/local/module 
$ sudo cp UTIL/os/linux/*.ko /tftpboot/usr/local/module

// cp ap-set.dat to filesystem
$ sudo make -p /tftpboot/etc/Wireless/RT2870AP
$ sudo cp MODULE/RT2870AP.dat /tftpboot/etc/Wireless/RT2870AP/

// set ap argument
$ vim /tftpboot/etc/Wireless/RT2870AP/RT2870AP.dat

// set powerboot
$ vim /etc/rc.d/rcS
----Added to the last line of behind 
+ #install rc3070ap
+ insmod /usr/local/module/rtutil3070ap.ko
+ insmod /usr/local/module/rt3070ap.ko
+ insmod /usr/local/module/rtnet3070ap.ko

+ #run rc3070ap
+ ifconfig ra0 192.168.1.19
+ /usr/local/bin/dhcpd

 

在移植的过程中insmod时出现，如下错误

代码: 
# dmesg | grep atl1c 
atl1c: disagrees about version of symbol alloc_etherdev_mqs 
atl1c: Unknown symbol alloc_etherdev_mqs (err -22) 
atl1c: disagrees about version of symbol __vlan_hwaccel_rx 
atl1c: Unknown symbol __vlan_hwaccel_rx (err -22) 
atl1c: disagrees about version of symbol skb_put 
atl1c: Unknown symbol skb_put (err -22) 
atl1c: disagrees about version of symbol consume_skb 
atl1c: Unknown symbol consume_skb (err -22) 
atl1c: disagrees about version of symbol __netif_schedule 
atl1c: Unknown symbol __netif_schedule (err -22) 
atl1c: disagrees about version of symbol unregister_netdev 
atl1c: Unknown symbol unregister_netdev (err -22) 
atl1c: disagrees about version of symbol ___pskb_trim 
atl1c: Unknown symbol ___pskb_trim (err -22) 
atl1c: disagrees about version of symbol eth_validate_addr 
atl1c: Unknown symbol eth_validate_addr (err -22) 
atl1c: disagrees about version of symbol pskb_expand_head 
atl1c: Unknown symbol pskb_expand_head (err -22) 
atl1c: disagrees about version of symbol eth_type_trans 
atl1c: Unknown symbol eth_type_trans (err -22) 
atl1c: disagrees about version of symbol __napi_schedule 
atl1c: Unknown symbol __napi_schedule (err -22) 
atl1c: disagrees about version of symbol ethtool_op_set_sg 
atl1c: Unknown symbol ethtool_op_set_sg (err -22) 
atl1c: disagrees about version of symbol netif_device_detach 
atl1c: Unknown symbol netif_device_detach (err -22) 
atl1c: disagrees about version of symbol netif_device_attach 
atl1c: Unknown symbol netif_device_attach (err -22) 
atl1c: disagrees about version of symbol dev_kfree_skb_irq 
atl1c: Unknown symbol dev_kfree_skb_irq (err -22) 
atl1c: disagrees about version of symbol dev_kfree_skb_any 
atl1c: Unknown symbol dev_kfree_skb_any (err -22) 
atl1c: disagrees about version of symbol netif_napi_add 
atl1c: Unknown symbol netif_napi_add (err -22) 
atl1c: disagrees about version of symbol netif_receive_skb 
atl1c: Unknown symbol netif_receive_skb (err -22) 
atl1c: disagrees about version of symbol register_netdev 
atl1c: Unknown symbol register_netdev (err -22) 
atl1c: disagrees about version of symbol free_netdev 
atl1c: Unknown symbol free_netdev (err -22) 
atl1c: disagrees about version of symbol ethtool_op_get_link 
atl1c: Unknown symbol ethtool_op_get_link (err -22) 
atl1c: disagrees about version of symbol dev_alloc_skb 
atl1c: Unknown symbol dev_alloc_skb (err -22) 
atl1c: disagrees about version of symbol netif_carrier_off 
atl1c: Unknown symbol netif_carrier_off (err -22) 
atl1c: disagrees about version of symbol ethtool_op_get_sg 
atl1c: Unknown symbol ethtool_op_get_sg (err -22) 
atl1c: disagrees about version of symbol netif_carrier_on 
atl1c: Unknown symbol netif_carrier_on (err -22) 
atl1c: disagrees about version of symbol napi_complete 
atl1c: Unknown symbol napi_complete (err -22)

搜索到解决方法：

The "disagrees about version of symbol" errors seem to imply that your kernel and atl1c modules were built with different compiler versions or very different configurations.

Try rebuilding the kernel (including the Atheros/Attansic modules) from scratch: 
make clean 
make 
make modules_install

Strange, the --clean argument should have helped. But perhaps doing the following will make a difference:

1. back up your kernel .config file (cp /usr/src/linux/.config /usr/src/my.config) 
2. cd /usr/src/linux; make mrproper 
3. restore the .config file (cp /usr/src/my.config /usr/src/linux/.config) 
4. and finally, run genkernel.

是因为用错了kernel，要保持和编译过的kernel移植，包括编译器版本。

把udhcpd.conf中的 interface   wlan0       #default: eth 0 改为ra0.