概述
gt9xx.h
/* drivers/input/touchscreen/gt9xx.h
*
* 2010 - 2013 Goodix Technology.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be a reference
* to you, when you are integrating the GOODiX's CTP IC into your system,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
*/
#ifndef _GOODIX_GT9XX_H_
#define _GOODIX_GT9XX_H_
#include <linux/kernel.h>
#include <linux/hrtimer.h>
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/proc_fs.h>
#include <linux/string.h>
#include <asm/uaccess.h>
#include <linux/vmalloc.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/slab.h>
#ifdef CONFIG_HAS_EARLYSUSPEND
#include <linux/earlysuspend.h>
#endif
#include <linux/gpio.h>
#include "../../init-input.h"
#include <linux/pinctrl/consumer.h>
/***************************PART1:ON/OFF define*******************************/
#define GTP_CUSTOM_CFG 0
#define GTP_CHANGE_X2Y 0
#define GTP_DRIVER_SEND_CFG 1
#define GTP_HAVE_TOUCH_KEY 1
#define GTP_ICS_SLOT_REPORT 0
//#define GTP_CUSTOM_CFG 0 //关
//#define GTP_DRIVER_SEND_CFG 1 //开
#define GTP_AUTO_UPDATE 1 /* auto update fw by .bin file as default*/
#define GTP_HEADER_FW_UPDATE 1 /* auto update fw by gtp_default_FW in gt9xx_firmware.h, function together with GTP_AUTO_UPDATE */
#define GTP_AUTO_UPDATE_CFG 0 /* auto update config by .cfg file, function together with GTP_AUTO_UPDATE*/
#define GTP_COMPATIBLE_MODE 0 /* compatible with GT9XXF*/
#define GTP_CREATE_WR_NODE 1
#define GTP_ESD_PROTECT 0 /* esd protection with a cycle of 2 seconds*/
#define GTP_WITH_PEN 0
#define GTP_PEN_HAVE_BUTTON 0 /* active pen has buttons, function together with GTP_WITH_PEN*/
#define GTP_DEBUG_ON 0
#define GTP_DEBUG_ARRAY_ON 0
#define GTP_DEBUG_FUNC_ON 0
#if GTP_COMPATIBLE_MODE
typedef enum {
CHIP_TYPE_GT9 = 0,
CHIP_TYPE_GT9F = 1,
} CHIP_TYPE_T;
#endif
struct goodix_ts_data {
spinlock_t irq_lock;
struct i2c_client *client;
struct input_dev *input_dev;
struct hrtimer timer;
struct work_struct work;
#ifdef CONFIG_HAS_EARLYSUSPEND
struct early_suspend early_suspend;
#endif
s32 irq_is_disable;
s32 use_irq;
u16 abs_x_max;
u16 abs_y_max;
u8 max_touch_num;
u8 int_trigger_type;
u8 green_wake_mode;
u8 enter_update;
u8 gtp_is_suspend;
u8 gtp_rawdiff_mode;
u8 gtp_cfg_len;
u8 fixed_cfg;
u8 fw_error;
u8 pnl_init_error;
#if GTP_WITH_PEN
struct input_dev *pen_dev;
#endif
#if GTP_ESD_PROTECT
spinlock_t esd_lock;
u8 esd_running;
s32 clk_tick_cnt;
#endif
#if GTP_COMPATIBLE_MODE
u16 bak_ref_len;
s32 ref_chk_fs_times;
s32 clk_chk_fs_times;
CHIP_TYPE_T chip_type;
u8 rqst_processing;
u8 is_950;
#endif
};
extern u16 show_len;
extern u16 total_len;
extern struct ctp_config_info config_info;
extern void gtp_set_int_value(int status);
extern void gtp_set_io_int(void);
#define GTP_INT_PORT (config_info.irq_gpio.gpio)
#define GTP_RST_PORT (config_info.wakeup_gpio.gpio)
#define GTP_INT_IRQ (gpio_to_irq(GTP_INT_PORT))
/*******************************************************************************
#define GTP_GPIO_AS_INPUT(pin) do{
long unsigned int config;
char pin_name[8];
sunxi_gpio_to_name(pin,pin_name);
config = SUNXI_PINCFG_PACK(SUNXI_PINCFG_TYPE_FUNC,0xFFFF);
pin_config_get(SUNXI_PINCTRL,pin_name,&config);
if (1 != SUNXI_PINCFG_UNPACK_VALUE(config)){
config = SUNXI_PINCFG_PACK(SUNXI_PINCFG_TYPE_FUNC,1);
pin_config_set(SUNXI_PINCTRL,pin_name,config);
}
}while(0)
#define GTP_GPIO_AS_INT(pin) do{
long unsigned int config;
char pin_name[8];
sunxi_gpio_to_name(pin,pin_name);
config = SUNXI_PINCFG_PACK(SUNXI_PINCFG_TYPE_FUNC,0xFFFF);
pin_config_get(SUNXI_PINCTRL,pin_name,&config);
if (4 != SUNXI_PINCFG_UNPACK_VALUE(config)){
config = SUNXI_PINCFG_PACK(SUNXI_PINCFG_TYPE_FUNC,4);
pin_config_set(SUNXI_PINCTRL,pin_name,config);
}
}while(0)
#define GTP_GPIO_GET_VALUE(pin) gpio_get_value(pin)
#define GTP_GPIO_OUTPUT(pin,level) gpio_direction_output(pin,level)
#define GTP_GPIO_REQUEST(pin, label) gpio_request(pin, label)
#define GTP_GPIO_FREE(pin) gpio_free(pin)
#define GTP_IRQ_TAB {IRQ_TYPE_EDGE_RISING, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH}
********************************************************************************/
/*************************** PART2:TODO define **********************************
STEP_1(REQUIRED): Define Configuration Information Group(s)
Sensor_ID Map:
sensor_opt1 sensor_opt2 Sensor_ID
GND GND 0
VDDIO GND 1
NC GND 2
GND NC/300K 3
VDDIO NC/300K 4
NC NC/300K 5
TODO: define your own default or for Sensor_ID == 0 config here.
The predefined one is just a sample config, which is not suitable for your tp in most cases.
suozhi,1536*2048,gt9271,COF
************************************************************************************/
#define CTP_CFG_GROUP1 {
0x46,0x80,0x07,0xB0,0x04,0x0A,0x3D,0x00,0x01,0x0A,
0x1E,0x0F,0x50,0x3C,0x03,0x04,0x01,0x01,0x00,0x00,
0x00,0x00,0x00,0x1A,0x1C,0x1E,0x14,0x90,0x30,0xAA,
0x32,0x30,0x03,0x15,0x00,0x00,0x02,0x03,0x03,0x1D,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x00,
0x00,0x27,0x3B,0x94,0xC5,0x02,0x08,0x00,0x00,0x04,
0x8C,0x28,0x00,0x85,0x2C,0x00,0x80,0x30,0x00,0x7B,
0x34,0x00,0x77,0x38,0x00,0x77,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x19,0x18,0x17,0x16,0x15,0x14,0x11,0x10,
0x0F,0x0E,0x0D,0x0C,0x09,0x08,0x07,0x06,0x05,0x04,
0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x02,0x04,0x06,0x07,0x08,0x0A,0x0C,
0x0D,0x0E,0x0F,0x10,0x11,0x12,0x13,0x14,0x2A,0x29,
0x28,0x27,0x26,0x25,0x24,0x23,0x22,0x21,0x20,0x1F,
0x1E,0x1C,0x1B,0x19,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x61,0x01}
/* TODO: define your config for Sensor_ID == 1 here, if needed*/
/* for yuxin gt9110,COB*/
#define CTP_CFG_GROUP2 {
0x41,0x00,0x06,0x00,0x08,0x0A,0xC5,0x00,0x01,0x08,
0x28,0x05,0x50,0x32,0x03,0x05,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x95,0x35,0xFF,
0x1E,0x20,0x31,0x0D,0x00,0x00,0x00,0x1A,0x03,0x2D,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x0F,0x4B,0x94,0xC5,0x02,0x08,0x00,0x00,0x04,
0xD0,0x11,0x00,0x9A,0x18,0x00,0x76,0x21,0x00,0x5C,
0x2E,0x00,0x4A,0x40,0x00,0x4A,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x1D,0x1C,0x1B,0x1A,0x19,0x18,0x17,0x16,
0x15,0x14,0x13,0x12,0x11,0x10,0x0F,0x0E,0x0D,0x0C,
0x0B,0x0A,0x09,0x08,0x07,0x06,0x05,0x04,0x03,0x02,
0x01,0x00,0x14,0x13,0x12,0x11,0x10,0x0F,0x0E,0x0D,
0x0C,0x0B,0x0A,0x09,0x08,0x07,0x06,0x05,0x04,0x03,
0x02,0x01,0x00,0x15,0x16,0x17,0x18,0x19,0x1B,0x1C,
0x1D,0x1E,0x1F,0x20,0x21,0x22,0x23,0x24,0x25,0x26,
0x27,0x28,0x29,0x2A,0x2A,0x01}
/* TODO: define your config for Sensor_ID == 2 here, if needed*/
/*for yuxin gt9271,COF*/
#define CTP_CFG_GROUP3 {
0x41,0x00,0x06,0x00,0x08,0x0A,0x05,0x00,0x01,0x0F,
0x28,0x0F,0x50,0x32,0x03,0x05,0x00,0x00,0xFB,0x03,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x90,0x30,0xAA,
0x1F,0x1C,0xD6,0x09,0x00,0x00,0x00,0x9A,0x33,0x25,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x19,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x01,0x04,0x05,0x06,0x07,0x08,0x09,
0x0C,0x0D,0x0E,0x0F,0x10,0x11,0x14,0x15,0x16,0x17,
0x18,0x19,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x14,0x13,0x12,0x11,0x10,0x0F,0x0E,0x0D,
0x0C,0x0A,0x08,0x07,0x06,0x04,0x02,0x00,0x19,0x1B,
0x1C,0x1E,0x1F,0x20,0x21,0x22,0x23,0x24,0x25,0x26,
0x27,0x28,0x29,0x2A,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x63,0x01}
/* TODO: define your config for Sensor_ID == 3 here, if needed*/
/*for dushulang gt9110,COF*/
#define CTP_CFG_GROUP4 {
0x41,0x56,0x05,0x00,0x03,0x0A,0x3D,0x00,0x01,0x08,
0x28,0x08,0x50,0x32,0x03,0x07,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x19,0x1A,0x1E,0x14,0x95,0x35,0xFF,
0x2A,0x2C,0x39,0x13,0x00,0x00,0x00,0x9A,0x03,0x2D,
0x00,0x00,0x00,0x80,0x83,0x04,0x6E,0x64,0x14,0x00,
0x00,0x1E,0x3C,0x94,0xC5,0x02,0x07,0x00,0x00,0x04,
0x96,0x20,0x00,0x89,0x25,0x00,0x7F,0x2A,0x00,0x77,
0x30,0x00,0x6F,0x38,0x00,0x6F,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,
0x08,0x09,0x0A,0x0B,0x0C,0x0D,0x0E,0x0F,0x10,0x11,
0x12,0x13,0x14,0x15,0x16,0x17,0x18,0x19,0x1A,0x1B,
0x1C,0x1D,0x2A,0x29,0x28,0x27,0x26,0x25,0x24,0x23,
0x22,0x21,0x20,0x1F,0x1E,0x1D,0x1C,0x1B,0x19,0x18,
0x17,0x16,0x15,0x14,0x13,0x12,0x11,0x10,0x0F,0x0E,
0x0D,0x0C,0x0B,0x0A,0x09,0x08,0x07,0x06,0x05,0x04,
0x03,0x02,0x01,0x00,0x24,0x01}
/* TODO: define your config for Sensor_ID == 4 here, if needed*/
/* machine: noah*/
#define CTP_CFG_GROUP5 {
0x46,0x00,0x05,0x20,0x03,0x0A,0x3D,0x00,0x01,0x0A,
0x1E,0x0F,0x50,0x3C,0x03,0x04,0x01,0x01,0x00,0x00,
0x00,0x00,0x00,0x1A,0x1C,0x1E,0x14,0x90,0x30,0xAA,
0x32,0x30,0x03,0x15,0x00,0x00,0x02,0x03,0x03,0x1D,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x27,0x3B,0x94,0xC5,0x02,0x08,0x00,0x00,0x04,
0x8C,0x28,0x00,0x85,0x2C,0x00,0x80,0x30,0x00,0x7B,
0x34,0x00,0x77,0x38,0x00,0x77,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x01,0x04,0x05,0x06,0x07,0x08,0x09,
0x0C,0x0D,0x0E,0x0F,0x10,0x11,0x14,0x15,0x16,0x17,
0x18,0x19,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x2A,0x29,0x28,0x27,0x26,0x25,0x24,0x23,
0x22,0x21,0x20,0x1F,0x1E,0x1C,0x1B,0x19,0x14,0x13,
0x12,0x11,0x10,0x0F,0x0E,0x0D,0x0C,0x0A,0x08,0x07,
0x06,0x04,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x7B,0x01}
/* TODO: define your config for Sensor_ID == 5 here, if needed*/
#define CTP_CFG_GROUP6 {
0x41,0x00,0x06,0x00,0x08,0x0A,0x35,0x00,0x01,0x0A,
0x28,0x0A,0x50,0x32,0x03,0x03,0x00,0x00,0xFF,0x7F,
0x00,0x00,0x04,0x16,0x1A,0x1E,0x14,0x90,0x30,0xAA,
0x30,0x32,0x2E,0x0B,0x00,0x00,0x00,0x9A,0x33,0x45,
0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x23,0x1E,0x41,0x4F,0xC5,0x01,0x08,0x00,0x00,0x04,
0xC1,0x20,0x00,0xAD,0x25,0x00,0x99,0x2C,0x00,0x8B,
0x33,0x00,0x7E,0x3C,0x00,0x7E,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x19,
0x50,0x37,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x01,0x04,0x05,0x06,0x07,0x08,0x09,
0x0C,0x0D,0x0E,0x0F,0x10,0x11,0x14,0x15,0x16,0x17,
0x18,0x19,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x2A,0x29,0x28,0x27,0x26,0x25,0x24,0x23,
0x22,0x21,0x20,0x1F,0x1E,0x1C,0x1B,0x19,0x14,0x13,
0x12,0x11,0x10,0x0F,0x0E,0x0D,0x0C,0x0A,0x08,0x07,
0x06,0x04,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x21,0x01}
#if 0
#define CTP_CFG_GROUP7 {
0x00,0x20,0x03,0x00,0x05,0x0A,0x05,0x01,
0x01,0x08,0x28,0x05,0x50,0x32,0x03,0x05,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x8A,0x2A,0x0C,0x17,0x15,
0x31,0x0D,0x00,0x00,0x00,0xBA,0x03,0x2C,
0x00,0x00,0x00,0x00,0x00,0x03,0x64,0x32,
0x00,0x00,0x00,0x00,0x00,0x00,0x40,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x48,0x50,0x58,0x60,
0xF0,0x4A,0x3A,0xFF,0xFF,0x27,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x18,0x16,0x14,0x12,0x10,0x0E,0x0C,0x0A,
0x08,0x06,0x04,0x02,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x24,0x22,
0x21,0x20,0x1F,0x1E,0x1D,0x1C,0x18,0x16,
0x12,0x10,0x0F,0x0C,0x0A,0x08,0x06,0x04,
0x02,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x2C,0x01 }
#endif
#if 0
/* TODO: define your config for Sensor_ID == 6 here, if needed 1024*600*/
#define CTP_CFG_GROUP7 {
0x41,0x20,0x03,0xe0,0x01,0x02,0x4d,0x00,
0x01,0x08,0x19,0x0a,0x50,0x3c,0x03,0x05,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x8a,0x2a,0x0c,0x46,0x44,
0x0c,0x08,0x00,0x00,0x00,0xba,0x02,0x1d,
0x00,0x01,0x00,0x00,0x00,0x03,0x64,0x32,
0x00,0x00,0x00,0x32,0x55,0x8a,0xc5,0x02,
0x07,0x00,0x00,0x04,0xa2,0x34,0x00,0x93,
0x3a,0x00,0x86,0x41,0x00,0x7b,0x48,0x00,
0x71,0x50,0x00,0x71,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x18,0x16,0x14,0x12,0x10,0x0e,0x0c,0x0a,
0x08,0x06,0x04,0x02,0xff,0xff,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,
0x04,0x06,0x08,0x0a,0x0f,0x10,0x12,0x13,
0x16,0x18,0x1c,0x1d,0x1e,0x1f,0x20,0x21,
0x22,0x24,0xff,0xff,0xff,0xff,0xff,0xff,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x78,0x01}
#endif
#define CTP_CFG_GROUP7 {
0x42,0x20,0x03,0x00,0x05,0x0A,0xB5,0x01,0x01,0x0A,0x28,0x0F,0x5A,0x37,0x03,0x05,0x00,0x00,0x00,0x00,0x00,0x00,0x06,0x17,0x19,0x1D,0x14,0x8A,0x2A,0x0C,0x5B,0x5D,0xB2,0x04,0x00,0x00,0x00,0xB9,0x02,0x11,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x46,0x78,0x94,0xD5,0x02,0x07,0x00,0x00,0x04,0x96,0x49,0x00,0x89,0x52,0x00,0x7F,0x5B,0x00,0x76,0x66,0x00,0x6E,0x71,0x00,0x6E,0x48,0x50,0x58,0x60,0xF0,0x4A,0x3A,0xFF,0xFF,0x27,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x16,0x14,0x12,0x10,0x0E,0x0C,0x0A,0x08,0x06,0x04,0x02,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x24,0x22,0x21,0x20,0x1F,0x1E,0x1D,0x1C,0x18,0x16,0x12,0x10,0x0F,0x0C,0x0A,0x08,0x06,0x04,0x02,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xA5,0x01 }
//————————————————
//版权声明：本文为CSDN博主「曉之以礼」的原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接及本声明。
//原文链接：https://blog.csdn.net/weixin_44981258/article/details/103782805
#if 0
/*1680 * 480*/
#define CTP_CFG_GROUP7 {
0x42,0x40,0x06,0xE0,0x01,0x0A,0x0D,0x00,0x01,0x08,
0x28,0x05,0x50,0x32,0x03,0x05,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x8C,0x2D,0x08,
0x17,0x15,0x31,0x0D,0x00,0x00,0x01,0xB9,0x04,0x1D,
0x00,0x00,0x00,0x00,0x00,0x03,0x64,0x32,0x00,0x00,
0x00,0x0F,0x23,0x94,0xC5,0x02,0x07,0x00,0x00,0x04,
0x9E,0x10,0x00,0x8A,0x13,0x00,0x7C,0x16,0x00,0x6B,
0x1B,0x00,0x60,0x20,0x00,0x60,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x02,0x04,0x06,0x08,0x0A,0x0C,0x0E,0x10,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x02,0x04,0x06,0x08,0x0A,0x0C,0x0F,
0x10,0x12,0x13,0x14,0x16,0x18,0x1C,0x1D,0x1E,0x1F,
0x20,0x21,0x22,0x24,0x26,0x28,0x29,0xFF,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0xE1,0x01}
#endif
/* 400 * 1280*/
#define CTP_CFG_GROUP8 {
0x9A,0x90,0x01,0x00,0x05,0x0A,0x35,0x00,0x01,0x0F,
0x28,0x0F,0x50,0x32,0x03,0x05,0x00,0x41,0x00,0x00,
0x00,0x00,0x04,0x16,0x1C,0x1E,0x14,0x8B,0x2B,0x0B,
0x28,0x26,0x0C,0x08,0x00,0x00,0x01,0x9C,0x03,0x25,
0x00,0x01,0x00,0x00,0x00,0x03,0x64,0x32,0x00,0x00,
0x00,0x19,0x50,0x94,0xC5,0x02,0x07,0x00,0x00,0x04,
0x8D,0x13,0x00,0x5F,0x1D,0x00,0x3E,0x2E,0x00,0x2B,
0x48,0x00,0x20,0x70,0x00,0x20,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x16,0x14,0x12,0x10,0x0E,0x0C,0x0A,0x08,
0x06,0x04,0x02,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x13,0x12,0x10,0x0F,0x0C,0x0A,0x08,0x06,
0x04,0x02,0x00,0x16,0x18,0x1C,0x1D,0x1E,0x1F,0x20,
0x21,0x22,0x24,0x26,0xFF,0xFF,0xFF,0xFF,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0xDF,0x01}
#if GTP_CUSTOM_CFG
#define GTP_MAX_HEIGHT 800
#define GTP_MAX_WIDTH 480
#define GTP_INT_TRIGGER 0 /* 0: Rising 1: Falling*/
#else
#define GTP_MAX_HEIGHT 4096
#define GTP_MAX_WIDTH 4096
#define GTP_INT_TRIGGER 1
#endif
#define GTP_MAX_TOUCH 10
/* STEP_4(optional): If keys are available and reported as keys, config your key info here*/
#if GTP_HAVE_TOUCH_KEY
#define GTP_KEY_TAB {KEY_MENU, KEY_HOME, KEY_BACK, KEY_EJECTCD}
#endif
/***************************PART3:OTHER define**********************************/
#define GTP_DRIVER_VERSION "V2.2<2014/01/14>"
#define GTP_I2C_NAME "Goodix-TS"
#define GT91XX_CONFIG_PROC_FILE "gt9xx_config"
#define GTP_POLL_TIME 10
#define GTP_ADDR_LENGTH 2
#define GTP_CONFIG_MIN_LENGTH 186
#define GTP_CONFIG_MAX_LENGTH 240
#define FAIL 0
#define SUCCESS 1
#define SWITCH_OFF 0
#define SWITCH_ON 1
/******************** For GT9XXF Start **********************/
#define GTP_REG_BAK_REF 0x99D0
#define GTP_REG_MAIN_CLK 0x8020
#define GTP_REG_CHIP_TYPE 0x8000
#define GTP_REG_HAVE_KEY 0x804E
#define GTP_REG_MATRIX_DRVNUM 0x8069
#define GTP_REG_MATRIX_SENNUM 0x806A
#define GTP_FL_FW_BURN 0x00
#define GTP_FL_ESD_RECOVERY 0x01
#define GTP_FL_READ_REPAIR 0x02
#define GTP_BAK_REF_SEND 0
#define GTP_BAK_REF_STORE 1
#define CFG_LOC_DRVA_NUM 29
#define CFG_LOC_DRVB_NUM 30
#define CFG_LOC_SENS_NUM 31
#define GTP_CHK_FW_MAX 40
#define GTP_CHK_FS_MNT_MAX 300
#define GTP_BAK_REF_PATH "/data/gtp_ref.bin"
#define GTP_MAIN_CLK_PATH "/data/gtp_clk.bin"
#define GTP_RQST_CONFIG 0x01
#define GTP_RQST_BAK_REF 0x02
#define GTP_RQST_RESET 0x03
#define GTP_RQST_MAIN_CLOCK 0x04
#define GTP_RQST_RESPONDED 0x00
#define GTP_RQST_IDLE 0xFF
/******************** For GT9XXF End **********************/
/* Registers define*/
#define GTP_READ_COOR_ADDR 0x814E
#define GTP_REG_SLEEP 0x8040
#define GTP_REG_SENSOR_ID 0x814A
#define GTP_REG_CONFIG_DATA 0x8047
#define GTP_REG_VERSION 0x8140
#define RESOLUTION_LOC 3
#define TRIGGER_LOC 8
#define CFG_GROUP_LEN(p_cfg_grp) (sizeof(p_cfg_grp) / sizeof(p_cfg_grp[0]))
/* Log define*/
/***********************Add by zhongjian for sunxi tp************************
extern u32 debug_mask;
enum{
DEBUG_INIT = 1U << 0,
DEBUG_SUSPEND = 1U << 1,
DEBUG_INT_INFO = 1U << 2,
DEBUG_X_Y_INFO = 1U << 3,
DEBUG_KEY_INFO = 1U << 4,
DEBUG_WAKEUP_INFO = 1U << 5,
DEBUG_OTHERS_INFO = 1U << 6,
};
#define dprintk(level_mask,fmt,arg...) if(unlikely(debug_mask & level_mask))
printk("***CTP***"fmt, ## arg)
***************************************************************************/
//#define GTP_INFO(fmt,arg...) printk("<<-GTP-INFO->> "fmt"n",##arg)
#define GTP_INFO(fmt,arg...) do{
if(GTP_DEBUG_ON)
printk("<<-GTP-DEBUG->> [%u]"fmt"n",__LINE__, ##arg);
}while(0)
#define GTP_ERROR(fmt,arg...) printk("<<-GTP-ERROR->> "fmt"n",##arg)
#define GTP_DEBUG(fmt,arg...) do{
if(GTP_DEBUG_ON)
printk("<<-GTP-DEBUG->> [%u]"fmt"n",__LINE__, ##arg);
}while(0)
#define GTP_DEBUG_ARRAY(array, num) do{
s32 i;
u8* a = array;
if(GTP_DEBUG_ARRAY_ON)
{
printk("<<-GTP-DEBUG-ARRAY->>n");
for (i = 0; i < (num); i++)
{
printk("%02x ", (a)[i]);
if ((i + 1 ) %10 == 0)
{
printk("n");
}
}
printk("n");
}
}while(0)
#define GTP_DEBUG_FUNC() do{
if(GTP_DEBUG_FUNC_ON)
printk("<<-GTP-FUNC->> Func:%s@Line:%un",__func__,__LINE__);
}while(0)
#define GTP_SWAP(x, y) do{
typeof(x) z = x;
x = y;
y = z;
}while (0)
/*****************************End of Part III*********************************/
#endif /* _GOODIX_GT9XX_H_ */
最后
以上就是俏皮哈密瓜为你收集整理的全志 gt911 触摸屏驱动的全部内容，希望文章能够帮你解决全志 gt911 触摸屏驱动所遇到的程序开发问题。
如果觉得靠谱客网站的内容还不错，欢迎将靠谱客网站推荐给程序员好友。
本图文内容来源于网友提供，作为学习参考使用，或来自网络收集整理，版权属于原作者所有。
![[高通MSM8953_64][Android10]解决制作差分包不生成system_manifest.xml的问题](/uploads/reation/bcimg8.png)
![[msm8953][Android7.1] 新增mipi lcd panel](/uploads/reation/bcimg10.png)
发表评论 取消回复