IPQ60xx WIFI6配置和启动过程，配置文件/etc/config/wireless生成和启动wifi6功能测试，目前使用QSDK11.2 openwrt15.05移植到openwrt18.06成功。

boot启动脚本

/etc/init.d/boot

#!/bin/sh /etc/rc.common
# Copyright (C) 2006-2011 OpenWrt.org
START=10
STOP=98
boot() {
# allow wifi modules time to settle
sleep 1
#/sbin/wifi detect > /tmp/wireless.tmp
#openwrt 15.05
/sbin/wifi config > /tmp/wireless.tmp
#openwrt 18.06
[ -s /tmp/wireless.tmp ] && {
cat /tmp/wireless.tmp >> /etc/config/wireless
}
rm -f /tmp/wireless.tmp
}

wifi配置脚本

/sbin/wifi

#!/bin/sh
# Copyright (C) 2006 OpenWrt.org
. /lib/functions.sh
. /usr/share/libubox/jshn.sh
usage() {
cat <<EOF
Usage: $0 [config|up|down|reload|status]
enables (default), disables or configures devices not yet configured.
EOF
exit 1
}
wifi_config() {
[ ! -f /etc/config/wireless ] && touch /etc/config/wireless
for driver in $DRIVERS; do (
if eval "type detect_$driver" 2>/dev/null >/dev/null; then
eval "detect_$driver" || echo "$driver: Detect failed" >&2
else
echo "$driver: Hardware detection not supported" >&2
fi
); done
}
DEVICES=
DRIVERS=
include /lib/wifi
scan_wifi
case "$1" in
down) wifi_updown "disable" "$2";;
detect) wifi_detect_notice ;;
config) wifi_config ;;
status) ubus_wifi_cmd "status" "$2";;
reload) wifi_reload "$2";;
reload_legacy) wifi_reload_legacy "$2";;
--help|help) usage;;
''|up) ubus call network reload; wifi_updown "enable" "$2";;
*) usage; exit 1;;
esac

DRIVERS变量在/lib/wifi/qcawificfg80211.sh和qcawifi.sh赋值：

/lib/wifi/qcawificfg80211.sh:10
append DRIVERS "qcawificfg80211"
/lib/wifi/qcawifi.sh:10
append DRIVERS "qcawifi"

qcawificfg80211配置脚本

detect_qcawificfg80211函数

detect_qcawificfg80211() {
...
load_qcawificfg80211
config_load wireless
cd /sys/class/net
for soc in $(ls -d soc* 2>&-); do
if [ -f ${soc}/hw_modes ]; then
hw_modes=$(cat ${soc}/hw_modes)
ini_file=$(cat ${soc}/ini_file)
case "${hw_modes}" in
*2G_PHYB:*)
prefer_hw_mode_id=7;;
*DBS_SBS:*)
prefer_hw_mode_id=4;;
*DBS:*)
prefer_hw_mode_id=1;;
*DBS_OR_SBS:*)
prefer_hw_mode_id=5;;
*SINGLE:*)
prefer_hw_mode_id=0;;
*SBS_PASSIVE:*)
prefer_hw_mode_id=2;;
*SBS:*)
prefer_hw_mode_id=3;;
esac
if [ $hw_mode_detect == 1 ] && [ -f /ini/internal/$ini_file ]; then
update_internal_ini $ini_file hw_mode_id "$prefer_hw_mode_id"
fi
fi
done
[ -d wifi0 ] || return
for dev in $(ls -d wifi* 2>&-); do
found=0
config_foreach check_qcawifi_device wifi-device
if [ "$found" -gt 0 ]; then
config_present=1
continue
fi
if [ $num_chains -le $(cat ${dev}/txchains) ]; then
num_chains=$(cat ${dev}/txchains)
fi
if [ $num_chains -le $(cat ${dev}/rxchains) ]; then
num_chains=$(cat ${dev}/rxchains)
fi
[ -f ${dev}/is_e_build ] && {
is_e_build=$(cat ${dev}/is_e_build)
}
hwcaps=$(cat ${dev}/hwcaps)
case "${hwcaps}" in
*11an) mode_11=na;;
*11an/ac) mode_11=ac;;
*11an/ac/ax) mode_11=axa;;
*11abgn/ac) mode_11=ac;;
*11abgn/ac/ax) mode_11=axa;;
*11abgn) mode_11=ng;;
*11bgn) mode_11=ng;;
*11bgn/ax) mode_11=axg;;
*11/ax) mode_11=axa;;
esac
if [ -f /sys/class/net/${dev}/nssoffload ] && [ $(cat /sys/class/net/${dev}/nssoffload) == "capable" ]; then
case "${mode_11}" in
ng)
if [ $olcfg_ng == 0 ]; then
olcfg_ng=1
nss_olcfg=$(($nss_olcfg|$((1<<$devidx))))
nss_ol_num=$(($nss_ol_num + 1))
fi
;;
na|ac)
if [ $olcfg_ac == 0 ]; then
olcfg_ac=1
nss_olcfg=$(($nss_olcfg|$((1<<$devidx))))
nss_ol_num=$(($nss_ol_num + 1))
fi
;;
axa)
if [ $olcfg_axa -le 1 ]; then
olcfg_axa=$(($olcfg_axa + 1))
nss_olcfg=$(($nss_olcfg|$((1<<$devidx))))
nss_ol_num=$(($nss_ol_num + 1))
fi
;;
axg)
if [ $olcfg_axg == 0 ]; then
olcfg_axg=1
nss_olcfg=$(($nss_olcfg|$((1<<$devidx))))
nss_ol_num=$(($nss_ol_num + 1))
fi
;;
esac
reload=1
fi
cat <<EOF
config wifi-device
wifi$devidx
option type qcawificfg80211
option channel
auto
option macaddr
$(cat /sys/class/net/${dev}/address)
option hwmode
11${mode_11}
# REMOVE THIS LINE TO ENABLE WIFI:
option disabled 1
config wifi-iface
option device
wifi$devidx
option network
lan
option mode ap
option ssid OpenWrt
option encryption none
EOF
devidx=$(($devidx + 1))
done
...
sync
if [ $reload == 1 ] ; then
if [ $avoid_load == 1 ]; then
wifi_updown "disable" "$2" > /dev/null
ubus call network reload
wifi_updown "enable" "$2" > /dev/null
else
unload_qcawificfg80211 > /dev/null
load_qcawificfg80211 > /dev/null
fi
fi
update_ini_reo_remap
update_ini_target_dp_rx_hash_reset
start_recovery_daemon
}

/sys/clase/net文件信息：

root@OpenWrt:/sys/class/net# ls -l
lrwxrwxrwx
1 root
root
0 Oct 23 00:30 bond0 -> ../../devices/virtual/net/bond0
-rw-r--r--
1 root
root
4096 Oct 23 00:30 bonding_masters
lrwxrwxrwx
1 root
root
0 Oct 23 00:31 br-lan -> ../../devices/virtual/net/br-lan
lrwxrwxrwx
1 root
root
0 Oct 23 00:30 eth0 -> ../../devices/platform/soc/3a001000.dp1/net/eth0
lrwxrwxrwx
1 root
root
0 Oct 23 00:30 eth1 -> ../../devices/platform/soc/3a001200.dp2/net/eth1
lrwxrwxrwx
1 root
root
0 Oct 23 00:30 eth2 -> ../../devices/platform/soc/3a001400.dp3/net/eth2
lrwxrwxrwx
1 root
root
0 Oct 23 00:30 eth3 -> ../../devices/platform/soc/3a001600.dp4/net/eth3
lrwxrwxrwx
1 root
root
0 Oct 23 00:30 gre0 -> ../../devices/virtual/net/gre0
lrwxrwxrwx
1 root
root
0 Oct 23 00:30 gretap0 -> ../../devices/virtual/net/gretap0
lrwxrwxrwx
1 root
root
0 Oct 23 00:30 ifb0 -> ../../devices/virtual/net/ifb0
lrwxrwxrwx
1 root
root
0 Oct 23 00:30 ifb1 -> ../../devices/virtual/net/ifb1
lrwxrwxrwx
1 root
root
0 Oct 23 00:30 ip6gre0 -> ../../devices/virtual/net/ip6gre0
lrwxrwxrwx
1 root
root
0 Oct 23 00:30 ip6tnl0 -> ../../devices/virtual/net/ip6tnl0
lrwxrwxrwx
1 root
root
0 Oct 23 00:30 ipsecdummy -> ../../devices/virtual/net/ipsecdummy
lrwxrwxrwx
1 root
root
0 Jan
1
1970 lo -> ../../devices/virtual/net/lo
lrwxrwxrwx
1 root
root
0 Oct 23 00:30 miireg -> ../../devices/virtual/net/miireg
lrwxrwxrwx
1 root
root
0 Oct 23 00:30 sit0 -> ../../devices/virtual/net/sit0
lrwxrwxrwx
1 root
root
0 Oct 23 00:31 soc0 -> ../../devices/platform/soc/c000000.wifi/net/soc0
lrwxrwxrwx
1 root
root
0 Oct 23 00:30 teql0 -> ../../devices/virtual/net/teql0
lrwxrwxrwx
1 root
root
0 Oct 23 00:31 wifi0 -> ../../devices/platform/soc/c000000.wifi/net/wifi0
lrwxrwxrwx
1 root
root
0 Oct 23 00:31 wifi1 -> ../../devices/platform/soc/c000000.wifi/net/wifi1
root@OpenWrt:/sys/class/net# cat soc0/hw_modes ; echo ""
DBS:DBS_OR_SBS:
root@OpenWrt:/sys/class/net# cat wifi0/hwcaps;echo ""
802.11an/ac/ax
root@OpenWrt:/sys/class/net# cat wifi1/hwcaps;echo ""
802.11bgn/ax

/etc/config/wireless生成的wifi配置文件信息：

config wifi-device
wifi0
option type	qcawificfg80211
option channel	auto
option macaddr	8c:88:2b:00:00:1e
option hwmode	11axa
# REMOVE THIS LINE TO ENABLE WIFI:
option disabled 1
config wifi-iface
option device	wifi0
option network	lan
option mode	ap
option ssid	OpenWrt
option encryption none
config wifi-device
wifi1
option type	qcawificfg80211
option channel	auto
option macaddr	8c:88:2b:00:00:1f
option hwmode	11axg
# REMOVE THIS LINE TO ENABLE WIFI:
option disabled 1
config wifi-iface
option device	wifi1
option network	lan
option mode	ap
option ssid	OpenWrt
option encryption none

wifi启动打印

[
19.390785] vmap allocation for size 446464 failed: use vmalloc=<size> to increase size.
[
22.083171] vmap allocation for size 3100672 failed: use vmalloc=<size> to increase size.
[
22.083914] vmap allocation for size 540672 failed: use vmalloc=<size> to increase size.
***** starting cnssdaemon
-i integrated *****
*****cnssdaemon pid=2409*********
[
23.262989] cnss[2]: INFO: Setting daemon_support=1 for instance_id 0x2
[
23.265150] cnss[2]: INFO: Setting cold_boot_support=1 for instance_id 0x2
*********initiating cold boot calibration*************
[
23.851333] vmap allocation for size 1474560 failed: use vmalloc=<size> to increase size.
[
23.851717] vmap allocation for size 307200 failed: use vmalloc=<size> to increase size.
[
24.080706] vmap allocation for size 831488 failed: use vmalloc=<size> to increase size.
[
24.080953] vmap allocation for size 151552 failed: use vmalloc=<size> to increase size.
[
24.094029] wlan: [2465:I:ANY] =======ol_if_register_wifi3_0==========
[
24.094029]
[
24.095975] wlan: [2465:I:ANY] osif_nss_register_module: 708: NSS wifi ops registered for target_type:1 with soc_ops:c5d6eae8
[
24.103685] wlan: [2465:I:ANY] ol_ath_wifi_ssr: 298: ol_ath_wifi_ssr: SSR event 2 bus_type 1
[
24.115164] remoteproc remoteproc0: powering up cd00000.qcom_q6v5_wcss
[
24.137304] remoteproc remoteproc0: Booting fw image IPQ6018/q6_fw.mdt, size 7340
[
24.920244] Subsystem error monitoring/handling services are up
[
24.920522] remoteproc remoteproc0: remote processor cd00000.qcom_q6v5_wcss is now up
[
24.925121] rpmsg_dev_probe: No pm domain
[
24.933123] rpmsg_dev_probe: No pm domain
[
24.936992] wlan: [2465:I:ANY] ol_ath_wifi_ssr: 298: ol_ath_wifi_ssr: SSR event 3 bus_type 1
[
24.941104] cnss[2]: INFO: Waiting for FW ready. Device: 0xfffd, FW ready timeout: 15 seconds
[
24.949770] cnss[2]: INFO: QMI WLFW service connected, state: 0x1
[
24.958137] diag: In diag_send_feature_mask_update, control channel is not open, p: 2, 7fa51d84
[
24.964100] cnss[2]: INFO: device_id : 65533 mem mode : [0]
[
24.972493] cnss[2]: INFO: platform name: Qualcomm Technologies, Inc. IPQ6018/AP-CP01-C1
[
24.978647] cnss[2]: INFO: Target capability: chip_id: 0x11, chip_family: 0x4, board_id: 0xff, soc_id: 0xffffffff, fw_version: 0x230b8b74, fw_build_timestamp: 2020-08-23 12:23, otp_version: 0x0 eeprom_caldata_read_timeout 0s
[
24.986291] cnss[2]: INFO: No board_id entry in device tree
[
25.010274] cnss[2]: INFO: BDF location : 0x4abc0000
[
25.011510] cnss[2]: INFO: BDF IPQ6018/bdwlan.bin size 65536
[
25.017154] cnss[2]: INFO: per device BDF location : 0x4abe0000
[
25.022376] cnss[2]: INFO: CALDATA IPQ6018/caldata.bin size 65536 offset 0x20000
[
25.055668] cnss[2]: INFO: FW ready received for device 0xfffd
[
25.056766] wlan: [2465:I:ANY] pld_ahb_wlan_enable: 697: cnss_mode: Cold boot calibration
[
25.060395] cnss[2]: INFO: Sending mode message, mode: COLDBOOT CALIBRATION(7), state: 0xf
[
25.183166] wlan: [2465:I:ANY] init_ath_pci_3_0: 183: 6ath_ol_pci_wifi3.0 :
(Atheros/multi-bss)
[
25.187625] wlan: [2470:I:ANY] ol_ath_wifi_ssr: 298: ol_ath_wifi_ssr: SSR event 0 bus_type 1
[
25.191016] cnss[2]: INFO: Coldboot Calbration wait started for Device: 0xfffd, timeout: 60 seconds
[
27.937064] cnss[2]: INFO: Coldboot Calibration completed successfully for device 0xfffd
[
27.945719] cnss[2]: INFO: Coldboot Calibration wait ended for device 0xfffd
[
27.945751] cnss[2]: INFO: Sending mode message, mode: OFF(4), state: 0x7
[
27.953487] cnss[2]: INFO: QMI WLFW service disconnected, state: 0x6
[
27.979669] remoteproc remoteproc0: stopped remote processor cd00000.qcom_q6v5_wcss
[
27.979723] wlan: [2470:I:ANY] ol_ath_wifi_ssr: 298: ol_ath_wifi_ssr: SSR event 1 bus_type 1
[
29.131790] vmap allocation for size 1474560 failed: use vmalloc=<size> to increase size.
[
29.132174] vmap allocation for size 307200 failed: use vmalloc=<size> to increase size.
[
29.330064] vmap allocation for size 831488 failed: use vmalloc=<size> to increase size.
[
29.330305] vmap allocation for size 151552 failed: use vmalloc=<size> to increase size.
[
29.342749] wlan: [2476:I:ANY] =======ol_if_register_wifi3_0==========
[
29.342749]
[
29.345291] wlan: [2476:I:ANY] osif_nss_register_module: 708: NSS wifi ops registered for target_type:1 with soc_ops:c5d6eae8
[
29.353052] wlan: [2476:I:ANY] ol_ath_wifi_ssr: 298: ol_ath_wifi_ssr: SSR event 2 bus_type 1
[
29.364492] remoteproc remoteproc0: powering up cd00000.qcom_q6v5_wcss
[
29.373066] remoteproc remoteproc0: Booting fw image IPQ6018/q6_fw.mdt, size 7340
[
29.672327] Subsystem error monitoring/handling services are up
[
29.672604] remoteproc remoteproc0: remote processor cd00000.qcom_q6v5_wcss is now up
[
29.672800] rpmsg_dev_probe: No pm domain
[
29.672954] rpmsg_dev_probe: No pm domain
[
29.673552] cnss[2]: INFO: QMI WLFW service connected, state: 0x1
[
29.673756] cnss[2]: INFO: device_id : 65533 mem mode : [0]
[
29.675042] cnss[2]: INFO: platform name: Qualcomm Technologies, Inc. IPQ6018/AP-CP01-C1
[
29.675042] cnss[2]: INFO: Target capability: chip_id: 0x11, chip_family: 0x4, board_id: 0xff, soc_id: 0xffffffff, fw_version: 0x230b8b74, fw_build_timestamp: 2020-08-23 12:23, otp_version: 0x0 eeprom_caldata_read_timeout 0s
[
29.675052] cnss[2]: INFO: No board_id entry in device tree
[
29.675205] cnss[2]: INFO: BDF location : 0x4abc0000
[
29.675207] cnss[2]: INFO: BDF IPQ6018/bdwlan.bin size 65536
[
29.675511] cnss[2]: INFO: per device BDF location : 0x4abe0000
[
29.675531] cnss[2]: INFO: CALDATA IPQ6018/caldata.bin size 65536 offset 0x20000
[
29.754522] wlan: [2476:I:ANY] ol_ath_wifi_ssr: 298: ol_ath_wifi_ssr: SSR event 3 bus_type 1
[
29.762140] cnss[2]: INFO: Waiting for FW ready. Device: 0xfffd, FW ready timeout: 15 seconds
[
29.770550] cnss[2]: INFO: FW ready received for device 0xfffd
[
29.779122] wlan: [2476:I:ANY] pld_ahb_wlan_enable: 705: cnss_mode: Mission mode
[
29.784887] cnss[2]: INFO: Sending mode message, mode: MISSION(0), state: 0x7
[
29.799148] wlan: [2476:I:ANY] qca_napi_create: 373: qca_napi_create: napi instance 0 created on pipe 4
[
29.799457] wlan: [2476:I:ANY] __ol_ath_attach: 3994: Allocated soc b8b00500
[
29.808785] wlan: [2476:E:CONFIG] cfg_uint_item_handler: 171: dp_nss_comp_ring_size=4096 - Out of range [8192, 49152]; Using 8192
[
29.816115] wlan: [2476:I:ANY] osif_nss_wifi_soc_setup: 827: nss register id -1 nss config 0 Target Type 19
[
29.827421] wlan: [2476:I:ANY] __ol_ath_attach: 4198: dev name soc0
[
29.837443] wlan: [2476:I:ANY] ol_ath_soc_attach: 6421: WMI attached. wmi_handle b793aa00
[
29.856747] wlan: [2476:I:ANY] htc_wmi_init: 5460: HT Create . b50e6000
[
29.856773] wlan: [2476:I:ANY] htc_wmi_init: 5467: Skipping BMI Done
[
29.862159] wlan: [2476:I:ANY] htc_wmi_init: 5524: host_enable 0 nss_nwifi_offload 0
[
29.886697] wlan: [2476:I:ANY] ol_target_init_complete: 5595: CDP soc attach success
[
29.886726] wlan: [2476:I:ANY] ol_target_init_complete: 5602: Soc attach success NSS config 0
[
29.893595] wlan: [2476:I:ANY] htc_set_async_ep: 428: htc_set_async_ep: htc_handle b50e6000, ep 2, value 1
[
29.901987] wlan: [2476:I:ANY] htc_set_async_ep: 428: htc_set_async_ep: htc_handle b50e6000, ep 3, value 1
[
29.911603] wlan: [2476:I:ANY] 1 Target failed service 0x106 connect request (status:1)
[
29.911603]
[
29.921201] wlan: [2476:E:WMI] Failed to connect to WMI CONTROL service status:27
[
29.921201]
[
29.931464] wlan: [840:I:TIF] init_deinit_populate_hw_mode_capability: 363: Preferred mode is not set, use mode id 1
[
29.931464]
[
29.939710] wlan: [840:I:TIF] HE_CAP Info = 1a08010d
[
29.951759] wlan: [840:I:TIF] Num HW modes = 2
[
29.956791] wlan: [840:I:TIF] Num PHY = 2
[
29.961041] wlan: [840:I:TIF] FW Build Version (Ext.) = 0
[
29.965207] wlan: [840:I:TIF] HDL Version: MajorVersion.MinorVersion = 0.0
[
29.970540] wlan: [840:I:TIF] Preferred HW Mode = 1 Num Radios = 2
[
29.977300] wlan: [840:W:TIF] add_11ax_mode_flags: 2249: 11AX wireless modes are not populated by the target in reg capabilities, adding 11AX wireless modes
[
29.983450] wlan: [840:I:TIF] init_deinit_add_11ax_modes: 2429: hw_mode_id = 1 phy_id = 0 wireless modes = 0
[
29.997602] wlan: [840:W:TIF] add_11ax_mode_flags: 2249: 11AX wireless modes are not populated by the target in reg capabilities, adding 11AX wireless modes
[
30.007421] wlan: [840:I:TIF] init_deinit_add_11ax_modes: 2429: hw_mode_id = 1 phy_id = 1 wireless modes = 0
[
30.021414] wlan: [840:W:TIF] add_11ax_mode_flags: 2249: 11AX wireless modes are not populated by the target in reg capabilities, adding 11AX wireless modes
[
30.031207] wlan: [840:I:TIF] init_deinit_add_11ax_modes: 2429: hw_mode_id = 5 phy_id = 0 wireless modes = 0
[
30.045171] wlan: [840:W:TIF] add_11ax_mode_flags: 2249: 11AX wireless modes are not populated by the target in reg capabilities, adding 11AX wireless modes
[
30.055011] wlan: [840:I:TIF] init_deinit_add_11ax_modes: 2429: hw_mode_id = 5 phy_id = 1 wireless modes = 0
[
30.069202] wlan: [840:I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: 431: dfs_offload 1
[
30.078767] wlan: [840:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_agile_soc_obj_init: 3417: dfs->dfs_psoc_idx: 0
[
30.088572] wlan: [840:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_agile_soc_obj_init: 3423: dfs_soc_obj->num_dfs_privs: 1
[
30.098889] wlan: [840:I:TIF] init_deinit_alloc_pdevs: 1550: CDP PDEV ATTACH success
[
30.108667] wlan: [840:E:QDF] SOC0_PDEV2159027144 creation failed
[
30.116436] wlan: [840:E:DIRECT_BUF_RX] target_if_direct_buf_pdev_debugfs_init: 325: error while creating direct_buf debugfs dir
[
30.122538] wlan: [840:I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: 403: Do not allocate DFS object for 2G, pdev_id = 1
[
30.134640] wlan: [840:I:TIF] init_deinit_alloc_pdevs: 1550: CDP PDEV ATTACH success
[
30.146994] wlan: [840:I:TIF] init_deinit_get_total_num_ema_vaps: 238: num_radios: 2
[
30.154706] wlan: [840:I:TIF] init_deinit_get_total_num_ema_vaps: 256: ema_max_vap_cnt: 0
[
30.162447] wlan: [840:I:TIF] init_deinit_get_total_num_vdevs_for_soc: 376: num_vdevs: 34
[
30.170545] wlan: [840:I:TIF] init_deinit_get_total_num_ema_vaps: 238: num_radios: 2
[
30.178674] wlan: [840:I:TIF] init_deinit_get_total_num_ema_vaps: 256: ema_max_vap_cnt: 0
[
30.186490] wlan: [840:I:TIF] init_deinit_get_total_num_vdevs_for_soc: 376: num_vdevs: 34
[
30.194553] wlan: [840:I:TIF] init_deinit_get_total_beaconing_vdevs_for_soc: 598: beacon_tx_offload_max_vdev: 32
[
30.202721] wlan: [840:I:TIF] init_deinit_get_total_num_ema_vaps: 238: num_radios: 2
[
30.212968] wlan: [840:I:TIF] init_deinit_get_total_num_ema_vaps: 256: ema_max_vap_cnt: 0
[
30.220711] wlan: [840:I:TIF] init_deinit_get_total_num_vdevs_for_soc: 376: num_vdevs: 34
[
30.228759] wlan: [840:I:TIF] init_deinit_get_total_num_ema_vaps: 238: num_radios: 1
[
30.236922] wlan: [840:I:TIF] init_deinit_get_total_num_ema_vaps: 256: ema_max_vap_cnt: 0
[
30.244724] wlan: [840:I:TIF] init_deinit_get_total_num_vdevs_for_soc: 376: num_vdevs: 17
[
30.252806] wlan: [840:I:ANY] init_deinit_update_pdev_tgt_info: 1924: pdev id:0 wmi_handle:b793aa00
[
30.270576] wlan: [840:I:ANY] init_deinit_update_pdev_tgt_info: 1995: Pdev = 0 Number of peers = 529 vdevs = 17
[
30.270611] wlan: [840:I:TIF] init_deinit_update_pdev_tgt_info: 1998: CDP PDEV INIT success
[
30.280086] wlan: [840:I:ANY] init_deinit_update_pdev_tgt_info: 1924: pdev id:1 wmi_handle:b4f0da00
[
30.297954] wlan: [840:I:ANY] init_deinit_update_pdev_tgt_info: 1995: Pdev = 1 Number of peers = 529 vdevs = 17
[
30.297990] wlan: [840:I:TIF] init_deinit_update_pdev_tgt_info: 1998: CDP PDEV INIT success
[
30.407722] wlan: [840:I:ANY] copy_fw_abi_version_tlv: 7216: copy_fw_abi_version_tlv: INIT_CMD version: 1, 0, 0x5f414351, 0x4c4d, 0x0, 0x0
[
30.566240] wlan: [840:I:ANY] ready_extract_init_status_tlv: 9738: ready_extract_init_status_tlv:0
[
30.566268] wlan: [840:I:ANY] dp_peer_map_attach_wifi3: 9582: dp_peer_map_attach_wifi3 max_peers 1109, max_ast_index: 4112
[
30.566268]
[
30.574300] wlan: [2476:I:ANY] ol_ath_connect_htc: 1250: WMI is ready
[
30.586641] wlan: [2476:I:ANY] ol_ath_soc_attach: 6549: connect HTC
[
30.593088] wlan: [2476:I:ANY] ol_ath_soc_attach: 6550: bypasswmi : 0
[
30.599187] wlan: [2476:I:ANY] ol_ath_soc_attach: 6624: UMAC attach
[
30.605818] wlan: [2476:I:ANY] __ol_ath_attach: 4320: pdev_netdev name wifi0
[
30.611850] wlan: [2476:I:ANY] __ol_ath_attach: 4369: Skip txrx_pdev_attach_target
[
30.619138] wlan: [2476:I:ANY] __ol_ath_attach: 4395: BURSTING enabled by default
[
30.626562] wlan: [2476:I:ANY] ol_ath_pdev_attach: 8632: interface_id 0
[
30.634068] wlan: [2476:I:TIF] ol_ath_pdev_regdmn_init: 6785:
phy id = 0 Modes supported
[
30.640495] wlan: [2476:I:TIF] ol_ath_pdev_regdmn_init: 6792:
11b = 0 11g = 0 11a = 1 11n = 1 11ac = 1 11ax = 1
[
30.648832] wlan: [2476:I:TIF] ol_ath_pdev_regdmn_init: 6801:
Reg cap - phy_id = 0 supp_bnd = 2, modes = 391f9001, lo_2g = 0, hi_2g = 0 lo_g5 = 4900, hi_5g = 5920
[
30.659081] wlan: [2476:I:ANY] ol_ath_update_wireless_modes: 1325: wireless_modes = 391f9001 before update
[
30.673395] wlan: [2476:I:ANY] ol_ath_update_wireless_modes: 1341: Wireless_modes = 391f9001 after update
[
30.683117] wlan: [2476:I:ANY] ol_ath_update_ext_caps: 1933: 11ax 5G supported case
[
30.692862] wlan: [2476:I:MBSSIE] ieee80211_mbss_attach: 220: :>
[
30.700212] wlan: [2476:I:MBSSIE] ieee80211_mbss_attach: 233: :<
[
30.706461] wlan: [2476:I:ANY] ol_resmgr_create: 223: OL Resmgr Init-ed
[
30.712549] wlan: [2476:I:ANY] acfg_attach: 3339: acfg_attach: 3339: Netlink socket created:b8fbe400
[
30.718798] wlan: [2476:I:ANY] ol_ath_stats_attach: 2294: periodic_chan_stats: 1
[
30.728931] wlan: [2476:I:ANY] wlan_scan_update_channel_list: 1138: num_chan: 25
[
30.735575] wlan: [0:I:ANY] ol_ath_pdev_attach: 8948: Set global_ic[1], ptr:c62f776c
[
30.742923] wlan: [0:I:RPTR] qca_multi_link_init_module: 245:
[
30.742923] ******QCA Repeater Initialization Done***********
[
30.742923]
[
30.750659] wlan: [0:I:ANY] dp_lag_soc_enable: 102: pdev(b4f0d804) Enabling DBDC Repeater 0
[
30.763586] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: 55: pdev(b4f0d804) is_primary 0
[
30.772292] wlan: [0:I:ANY] ol_ath_twt_enable_complete_event_handler: 50: twt enabled
[
30.774348] wlan: [2476:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 606: cfg block channel list is empty
[
30.774353] wlan: [2476:I:ANY] ol_ath_configure_cong_ctrl_max_msdus: 3892: pdev_idx = 0 tx_desc_limit = 32768
[
30.774370] wlan: [2476:I:ANY] osif_wrap_attach: 239: osif wrap attached
[
30.774370]
[
30.774373] wlan: [2476:I:ANY] osif_wrap_devt_init: 201: osif wrap dev table init done
[
30.774373]
[
30.774377] wlan: [2476:I:ANY] osif_wrap_attach: 247:
Wrap Attached: Wrap_com =b793b400 ic->ic_wrap_com=b793b400 &wrap_com->wc_devt=b793b400
[
30.774377]
[
30.774400] wlan: [2476:I:ANY] __ol_ath_attach: 4568: needed_headroom reservation 60
[
30.774604] wlan: [2476:I:ANY] ieee80211_cfg80211_radio_attach: 13328: ic: 0xb4f60500, wdev: 0xb4f77d20, wiphy: 0xb8bcb960, netdev: 0xb4f60000
[
30.775178] wlan: [2476:I:ANY] __ol_ath_attach: 4320: pdev_netdev name wifi1
[
30.775192] wlan: [2476:I:ANY] __ol_ath_attach: 4369: Skip txrx_pdev_attach_target
[
30.775196] wlan: [2476:I:ANY] __ol_ath_attach: 4395: BURSTING enabled by default
[
30.775239] wlan: [2476:I:ANY] ol_ath_pdev_attach: 8632: interface_id 1
[
30.775251] wlan: [2476:I:TIF] ol_ath_pdev_regdmn_init: 6785:
phy id = 1 Modes supported
[
30.775255] wlan: [2476:I:TIF] ol_ath_pdev_regdmn_init: 6792:
11b = 1 11g = 1 11a = 0 11n = 1 11ac = 1 11ax = 1
[
30.775261] wlan: [2476:I:TIF] ol_ath_pdev_regdmn_init: 6801:
Reg cap - phy_id = 1 supp_bnd = 1, modes = 680680c, lo_2g = 2312, hi_2g = 2732 lo_g5 = 0, hi_5g = 0
[
30.775264] wlan: [2476:I:ANY] ol_ath_update_wireless_modes: 1325: wireless_modes = 680680c before update
[
30.775268] wlan: [2476:I:ANY] ol_ath_update_wireless_modes: 1341: Wireless_modes = 680680c after update
[
30.775273] wlan: [2476:I:ANY] ol_ath_update_ext_caps: 1941: 11ax 2G supported case
[
30.775370] wlan: [2476:I:MBSSIE] ieee80211_mbss_attach: 220: :>
[
30.775373] wlan: [2476:I:MBSSIE] ieee80211_mbss_attach: 233: :<
[
30.775377] wlan: [2476:I:ANY] ol_resmgr_create: 223: OL Resmgr Init-ed
[
30.775476] wlan: [2476:I:ANY] acfg_attach: 3314: Offload using existing sock b8fbe400
[
30.775483] wlan: [2476:I:ANY] ol_ath_stats_attach: 2294: periodic_chan_stats: 1
[
30.775724] wlan: [2476:I:ANY] wlan_scan_update_channel_list: 1138: num_chan: 11
[
30.775753] wlan: [0:I:ANY] ol_ath_pdev_attach: 8948: Set global_ic[2], ptr:c62f776c
[
30.775759] wlan: [0:I:ANY] dp_lag_soc_enable: 102: pdev(b17ce004) Enabling DBDC Repeater 0
[
30.775765] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: 55: pdev(b17ce004) is_primary 0
[
30.778023] wlan: [2476:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 606: cfg block channel list is empty
[
30.778029] wlan: [2476:I:ANY] ol_ath_configure_cong_ctrl_max_msdus: 3892: pdev_idx = 1 tx_desc_limit = 32768
[
30.778043] wlan: [2476:I:ANY] osif_wrap_attach: 239: osif wrap attached
[
30.778043]
[
30.778046] wlan: [2476:I:ANY] osif_wrap_devt_init: 201: osif wrap dev table init done
[
30.778046]
[
30.778051] wlan: [2476:I:ANY] osif_wrap_attach: 247:
Wrap Attached: Wrap_com =b084a400 ic->ic_wrap_com=b084a400 &wrap_com->wc_devt=b084a400
[
30.778051]
[
30.778066] wlan: [2476:I:ANY] __ol_ath_attach: 4568: needed_headroom reservation 60
[
30.778082] wlan: [2476:I:ANY] wlan_cfg80211_init: 13145: Number of 2G channels: 11
[
30.778229] wlan: [2476:I:ANY] ieee80211_cfg80211_radio_attach: 13328: ic: 0xb4a00500, wdev: 0xb4a17d20, wiphy: 0xb8bcd960, netdev: 0xb4a00000
[
30.778671] wlan: [2476:I:Dynamic Mode Change] ol_ath_check_and_reconfig_hw_mode: 3861: Running with HW mode = 1
[
30.778916] wlan: [2476:E:QLD] qld_register: 108: Handle or address is NULL
[
30.778931] wlan: [2476:I:ANY] wlan_pdev_operation: 796: num_radios=1, wifi_radios[0].sc = b4f60500_radio_type = 2
[
30.778936] wlan: [2476:I:ANY] wlan_pdev_operation: 796: num_radios=2, wifi_radios[1].sc = b4a00500_radio_type = 2
[
30.778956] wlan: [2476:I:ANY] init_ath_pci_3_0: 183: 6ath_ol_pci_wifi3.0 :
(Atheros/multi-bss)
[
30.848557] vmap allocation for size 598016 failed: use vmalloc=<size> to increase size.
[
30.848738] vmap allocation for size 122880 failed: use vmalloc=<size> to increase size.
[
30.856146] wlan: [2480:I:ANY] osif_nss_register_module: 708: NSS wifi ops registered for target_type:0 with soc_ops:c63d2008
[
30.856416] wlan: [2480:I:ANY] init_ath_pci_2_0: 147: 6ath_ol_pci_2_0:
(Atheros/multi-bss)
[
31.167787] wlan: [0:I:ANY] ol_ath_twt_enable_complete_event_handler: 50: twt enabled
No Direct-Attach chipsets found.
[
34.608833] wlan: [3088:I:ANY] ol_ath_wifi_ssr: 298: ol_ath_wifi_ssr: SSR event 0 bus_type 1
[
34.608884] wlan: [3088:I:ANY] ol_ath_ahb_remove: 948: Suspending Target - with disable_intr set :soc0 (sc b7ffc000) soc=b8b00500
[
34.616362] wlan: [3088:I:ANY] wlan_pdev_operation: 906: disable_target_intr val is 1
[
34.627913] wlan: [3088:I:ANY] wlan_pdev_operation: 906: disable_target_intr val is 1
[
34.635705] wlan: [3088:I:ANY] ol_ath_ahb_remove: 951: waiting for target paused event from target :soc0 (sc b7ffc000)
[
34.643506] wlan: [3088:I:ANY] ol_ath_ahb_remove: 969: AHB Call to nss detach
[
34.654097] wlan: [3088:I:ANY] ol_ath_ahb_remove: 972: Call to nss detach ops 00000000
[
34.661319] wlan: [3088:E:QLD] qld_register: 108: Handle or address is NULL
[
34.669229] wlan: [3088:I:ANY] osif_wrap_devt_detach: 217: osif wrap dev table detached
[
34.669229]
[
34.676149] wlan: [3088:I:ANY] osif_wrap_detach: 271: osif wrap detached
[
34.676149]
[
34.712466] wlan: [3088:E:CFR] cfr_6018_deinit_pdev: 1694: Failed to register with dbr
[
34.712495] wlan: [3088:E:CFR] tgt_cfr_deinit_pdev: 137: Error occurred with exit code 16
[
34.712495]
[
34.719311] wlan: [3088:E:CFR] cfr_deinitialize_pdev: 176: cfr_deinitialize_pdev status=16
[
34.719311]
[
34.728932] wlan: [3088:I:ANY] wlan_pdev_operation: 963: soc_txrx_handle b8a2a000 dp_pdev id 0
[
34.738755] wlan: [3088:I:ANY] wlan_pdev_operation: 963: soc_txrx_handle b8a2a000 dp_pdev id 1
[
34.747476] wlan: [3088:I:MBSSIE] ieee80211_mbss_detach: 240: :>
[
34.755818] wlan: [3088:I:MBSSIE] ieee80211_mbss_detach: 251: :<
[
34.762035] wlan: [3088:I:ANY] acfg_detach: 3370: acfg_detach Netlink socket released
[
34.767983] wlan: [3088:E:CFR] cfr_6018_deinit_pdev: 1694: Failed to register with dbr
[
34.775700] wlan: [3088:E:CFR] tgt_cfr_deinit_pdev: 137: Error occurred with exit code 16
[
34.775700]
[
34.783509] wlan: [3088:E:CFR] cfr_deinitialize_pdev: 176: cfr_deinitialize_pdev status=16
[
34.783509]
[
34.793153] wlan: [0:I:ANY] ol_ath_pdev_detach: 9582: remove global_ic[1]..gloabl_ic ptr:c62f776c
[
34.802791] wlan: [3088:I:RPTR] qca_multi_link_deinit_module: 222:
[
34.802791] ******QCA RPtr De-Init Done***********
[
34.802791]
[
34.811822] wlan: [3088:I:ANY] ieee80211_cfg80211_radio_detach: 13361: ieee80211_cfg80211_radio_detach: ic: 0xb4f60500, wdev: 0xb4f77d20, netdev: 0xb4f60000
[
34.965761] PCIe: User of event deregistration is NULL
[
34.995853] wlan: [3088:E:QLD] qld_register: 108: Handle or address is NULL
[
34.995959] wlan: [3088:I:ANY] osif_wrap_devt_detach: 217: osif wrap dev table detached
[
34.995959]
[
35.001618] wlan: [3088:I:ANY] osif_wrap_detach: 271: osif wrap detached
[
35.001618]
[
35.011419] wlan: [3088:E:CFR] cfr_6018_deinit_pdev: 1694: Failed to register with dbr
[
35.019420] wlan: [3088:E:CFR] tgt_cfr_deinit_pdev: 137: Error occurred with exit code 16
[
35.019420]
[
35.027231] wlan: [3088:E:CFR] cfr_deinitialize_pdev: 176: cfr_deinitialize_pdev status=16
[
35.027231]
[
35.036871] wlan: [3088:I:ANY] wlan_pdev_operation: 963: soc_txrx_handle b8a2a000 dp_pdev id 1
[
35.046555] wlan: [3088:I:MBSSIE] ieee80211_mbss_detach: 240: :>
[
35.055170] wlan: [3088:I:MBSSIE] ieee80211_mbss_detach: 251: :<
[
35.061357] wlan: [3088:E:CFR] cfr_6018_deinit_pdev: 1694: Failed to register with dbr
[
35.067333] wlan: [3088:E:CFR] tgt_cfr_deinit_pdev: 137: Error occurred with exit code 16
[
35.067333]
[
35.075055] wlan: [3088:E:CFR] cfr_deinitialize_pdev: 176: cfr_deinitialize_pdev status=16
[
35.075055]
[
35.084699] wlan: [0:I:ANY] ol_ath_pdev_detach: 9582: remove global_ic[0]..gloabl_ic ptr:c62f776c
[
35.094332] wlan: [3088:I:ANY] ieee80211_cfg80211_radio_detach: 13361: ieee80211_cfg80211_radio_detach: ic: 0xb4a00500, wdev: 0xb4a17d20, netdev: 0xb4a00000
[
35.235751] PCIe: User of event deregistration is NULL
[
35.315778] wlan: [3088:I:ANY] ol_ath_phyerr_detach: 343: 6ol_ath_phyerr_detach: called
[
35.322941] cnss[2]: INFO: Sending mode message, mode: OFF(4), state: 0x7
[
35.324916] cnss[2]: INFO: QMI WLFW service disconnected, state: 0x6
[
35.329992] wlan: [3088:I:ANY] 6ath_ahb_remove
[
35.329992]
[
35.362899] remoteproc remoteproc0: stopped remote processor cd00000.qcom_q6v5_wcss
[
35.362948] wlan: [3088:I:ANY] ol_ath_wifi_ssr: 298: ol_ath_wifi_ssr: SSR event 1 bus_type 1
[
35.781021] vmap allocation for size 446464 failed: use vmalloc=<size> to increase size.
[
38.228134] vmap allocation for size 3100672 failed: use vmalloc=<size> to increase size.
[
38.228885] vmap allocation for size 540672 failed: use vmalloc=<size> to increase size.
[
38.372203] cnss[2]: INFO: Setting daemon_support=1 for instance_id 0x2
[
38.374240] cnss[2]: INFO: Setting cold_boot_support=1 for instance_id 0x2
******Not the first boot. Skip coldboot calibration*****
[
38.874511] vmap allocation for size 1474560 failed: use vmalloc=<size> to increase size.
[
38.874894] vmap allocation for size 307200 failed: use vmalloc=<size> to increase size.
[
39.077163] vmap allocation for size 831488 failed: use vmalloc=<size> to increase size.
[
39.077403] vmap allocation for size 151552 failed: use vmalloc=<size> to increase size.
[
39.090566] wlan: [3252:I:ANY] =======ol_if_register_wifi3_0==========
[
39.090566]
[
39.092392] wlan: [3252:I:ANY] osif_nss_register_module: 708: NSS wifi ops registered for target_type:1 with soc_ops:c5d6eae8
[
39.100154] wlan: [3252:I:ANY] ol_ath_wifi_ssr: 298: ol_ath_wifi_ssr: SSR event 2 bus_type 1
[
39.111593] remoteproc remoteproc0: powering up cd00000.qcom_q6v5_wcss
[
39.120164] remoteproc remoteproc0: Booting fw image IPQ6018/q6_fw.mdt, size 7340
[
39.419169] Subsystem error monitoring/handling services are up
[
39.419444] remoteproc remoteproc0: remote processor cd00000.qcom_q6v5_wcss is now up
[
39.419614] rpmsg_dev_probe: No pm domain
[
39.419773] rpmsg_dev_probe: No pm domain
[
39.420648] cnss[2]: INFO: QMI WLFW service connected, state: 0x1
[
39.421429] cnss[2]: INFO: device_id : 65533 mem mode : [0]
[
39.425924] cnss[2]: INFO: platform name: Qualcomm Technologies, Inc. IPQ6018/AP-CP01-C1
[
39.425924] cnss[2]: INFO: Target capability: chip_id: 0x11, chip_family: 0x4, board_id: 0xff, soc_id: 0xffffffff, fw_version: 0x230b8b74, fw_build_timestamp: 2020-08-23 12:23, otp_version: 0x0 eeprom_caldata_read_timeout 0s
[
39.425933] cnss[2]: INFO: No board_id entry in device tree
[
39.426071] cnss[2]: INFO: BDF location : 0x4abc0000
[
39.426073] cnss[2]: INFO: BDF IPQ6018/bdwlan.bin size 65536
[
39.426320] cnss[2]: INFO: per device BDF location : 0x4abe0000
[
39.426338] cnss[2]: INFO: CALDATA IPQ6018/caldata.bin size 65536 offset 0x20000
[
39.501359] wlan: [3252:I:ANY] ol_ath_wifi_ssr: 298: ol_ath_wifi_ssr: SSR event 3 bus_type 1
[
39.508979] cnss[2]: INFO: Waiting for FW ready. Device: 0xfffd, FW ready timeout: 15 seconds
[
39.517388] cnss[2]: INFO: FW ready received for device 0xfffd
[
39.525956] wlan: [3252:I:ANY] pld_ahb_wlan_enable: 705: cnss_mode: Mission mode
[
39.531726] cnss[2]: INFO: Sending mode message, mode: MISSION(0), state: 0x7
[
39.545976] wlan: [3252:I:ANY] qca_napi_create: 373: qca_napi_create: napi instance 0 created on pipe 4
[
39.546295] wlan: [3252:I:ANY] __ol_ath_attach: 3994: Allocated soc b7f00500
[
39.555614] wlan: [3252:E:CONFIG] cfg_uint_item_handler: 171: dp_nss_comp_ring_size=4096 - Out of range [8192, 49152]; Using 8192
[
39.562816] wlan: [3252:E:CONFIG] cfg_uint_item_handler: 171: dp_rxdma_monitor_desc_ring=2048 - Out of range [4096, 16384]; Using 4096
[
39.574400] wlan: [3252:I:ANY] osif_nss_wifi_soc_setup: 827: nss register id -1 nss config 0 Target Type 19
[
39.586242] wlan: [3252:I:ANY] __ol_ath_attach: 4198: dev name soc0
[
39.596344] wlan: [3252:I:ANY] ol_ath_soc_attach: 6421: WMI attached. wmi_handle b8aa3800
[
39.615793] wlan: [3252:I:ANY] htc_wmi_init: 5460: HT Create . b50e6000
[
39.615820] wlan: [3252:I:ANY] htc_wmi_init: 5467: Skipping BMI Done
[
39.621205] wlan: [3252:I:ANY] htc_wmi_init: 5524: host_enable 0 nss_nwifi_offload 0
[
39.645390] wlan: [3252:I:ANY] ol_target_init_complete: 5595: CDP soc attach success
[
39.645420] wlan: [3252:I:ANY] ol_target_init_complete: 5602: Soc attach success NSS config 0
[
39.652309] wlan: [3252:I:ANY] htc_set_async_ep: 428: htc_set_async_ep: htc_handle b50e6000, ep 2, value 1
[
39.660668] wlan: [3252:I:ANY] htc_set_async_ep: 428: htc_set_async_ep: htc_handle b50e6000, ep 3, value 1
[
39.670873] wlan: [837:I:TIF] HE_CAP Info = 1a08010d
[
39.679891] wlan: [837:I:TIF] Num HW modes = 2
[
39.684999] wlan: [837:I:TIF] Num PHY = 2
[
39.689257] wlan: [837:I:TIF] FW Build Version (Ext.) = 0
[
39.693334] wlan: [837:I:TIF] HDL Version: MajorVersion.MinorVersion = 0.0
[
39.698726] wlan: [837:I:TIF] Preferred HW Mode = 1 Num Radios = 2
[
39.705509] wlan: [837:W:TIF] add_11ax_mode_flags: 2249: 11AX wireless modes are not populated by the target in reg capabilities, adding 11AX wireless modes
[
39.711674] wlan: [837:I:TIF] init_deinit_add_11ax_modes: 2429: hw_mode_id = 1 phy_id = 0 wireless modes = 0
[
39.725814] wlan: [837:W:TIF] add_11ax_mode_flags: 2249: 11AX wireless modes are not populated by the target in reg capabilities, adding 11AX wireless modes
[
39.735626] wlan: [837:I:TIF] init_deinit_add_11ax_modes: 2429: hw_mode_id = 1 phy_id = 1 wireless modes = 0
[
39.749599] wlan: [837:W:TIF] add_11ax_mode_flags: 2249: 11AX wireless modes are not populated by the target in reg capabilities, adding 11AX wireless modes
[
39.759415] wlan: [837:I:TIF] init_deinit_add_11ax_modes: 2429: hw_mode_id = 5 phy_id = 0 wireless modes = 0
[
39.773383] wlan: [837:W:TIF] add_11ax_mode_flags: 2249: 11AX wireless modes are not populated by the target in reg capabilities, adding 11AX wireless modes
[
39.783199] wlan: [837:I:TIF] init_deinit_add_11ax_modes: 2429: hw_mode_id = 5 phy_id = 1 wireless modes = 0
[
39.797392] wlan: [837:I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: 431: dfs_offload 1
[
39.806979] wlan: [837:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_agile_soc_obj_init: 3417: dfs->dfs_psoc_idx: 0
[
39.816785] wlan: [837:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_agile_soc_obj_init: 3423: dfs_soc_obj->num_dfs_privs: 1
[
39.826972] wlan: [837:I:TIF] init_deinit_alloc_pdevs: 1550: CDP PDEV ATTACH success
[
39.836878] wlan: [837:E:QDF] SOC0_PDEV2159027144 creation failed
[
39.844640] wlan: [837:E:DIRECT_BUF_RX] target_if_direct_buf_pdev_debugfs_init: 325: error while creating direct_buf debugfs dir
[
39.850674] wlan: [837:I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: 403: Do not allocate DFS object for 2G, pdev_id = 1
[
39.862719] wlan: [837:I:TIF] init_deinit_alloc_pdevs: 1550: CDP PDEV ATTACH success
[
39.875206] wlan: [837:I:TIF] init_deinit_get_total_num_ema_vaps: 238: num_radios: 2
[
39.882930] wlan: [837:I:TIF] init_deinit_get_total_num_ema_vaps: 256: ema_max_vap_cnt: 0
[
39.890655] wlan: [837:I:TIF] init_deinit_get_total_num_vdevs_for_soc: 376: num_vdevs: 34
[
39.898732] wlan: [837:I:TIF] init_deinit_get_total_num_ema_vaps: 238: num_radios: 2
[
39.906887] wlan: [837:I:TIF] init_deinit_get_total_num_ema_vaps: 256: ema_max_vap_cnt: 0
[
39.914695] wlan: [837:I:TIF] init_deinit_get_total_num_vdevs_for_soc: 376: num_vdevs: 34
[
39.922775] wlan: [837:I:TIF] init_deinit_get_total_beaconing_vdevs_for_soc: 598: beacon_tx_offload_max_vdev: 32
[
39.930936] wlan: [837:I:TIF] init_deinit_get_total_num_ema_vaps: 238: num_radios: 2
[
39.941177] wlan: [837:I:TIF] init_deinit_get_total_num_ema_vaps: 256: ema_max_vap_cnt: 0
[
39.948902] wlan: [837:I:TIF] init_deinit_get_total_num_vdevs_for_soc: 376: num_vdevs: 34
[
39.957002] wlan: [837:I:TIF] init_deinit_get_total_num_ema_vaps: 238: num_radios: 1
[
39.965127] wlan: [837:I:TIF] init_deinit_get_total_num_ema_vaps: 256: ema_max_vap_cnt: 0
[
39.972946] wlan: [837:I:TIF] init_deinit_get_total_num_vdevs_for_soc: 376: num_vdevs: 17
[
39.981021] wlan: [837:I:ANY] init_deinit_update_pdev_tgt_info: 1924: pdev id:0 wmi_handle:b8aa3800
[
39.995843] wlan: [837:I:ANY] init_deinit_update_pdev_tgt_info: 1995: Pdev = 0 Number of peers = 529 vdevs = 17
[
39.998032] wlan: [837:I:TIF] init_deinit_update_pdev_tgt_info: 1998: CDP PDEV INIT success
[
40.008252] wlan: [837:I:ANY] init_deinit_update_pdev_tgt_info: 1924: pdev id:1 wmi_handle:b7c6ac00
[
40.023521] wlan: [837:I:ANY] init_deinit_update_pdev_tgt_info: 1995: Pdev = 1 Number of peers = 529 vdevs = 17
[
40.025464] wlan: [837:I:TIF] init_deinit_update_pdev_tgt_info: 1998: CDP PDEV INIT success
[
40.135930] wlan: [837:I:ANY] copy_fw_abi_version_tlv: 7216: copy_fw_abi_version_tlv: INIT_CMD version: 1, 0, 0x5f414351, 0x4c4d, 0x0, 0x0
[
40.294382] wlan: [837:I:ANY] ready_extract_init_status_tlv: 9738: ready_extract_init_status_tlv:0
[
40.294411] wlan: [837:I:ANY] dp_peer_map_attach_wifi3: 9582: dp_peer_map_attach_wifi3 max_peers 1109, max_ast_index: 4112
[
40.294411]
[
40.302421] wlan: [3252:I:ANY] ol_ath_connect_htc: 1250: WMI is ready
[
40.314775] wlan: [3252:I:ANY] ol_ath_soc_attach: 6549: connect HTC
[
40.321236] wlan: [3252:I:ANY] ol_ath_soc_attach: 6550: bypasswmi : 0
[
40.327329] wlan: [3252:I:ANY] ol_ath_soc_attach: 6624: UMAC attach
[
40.333960] wlan: [3252:I:ANY] __ol_ath_attach: 4320: pdev_netdev name wifi0
[
40.339998] wlan: [3252:I:ANY] __ol_ath_attach: 4369: Skip txrx_pdev_attach_target
[
40.347280] wlan: [3252:I:ANY] __ol_ath_attach: 4395: BURSTING enabled by default
[
40.354697] wlan: [3252:I:ANY] ol_ath_pdev_attach: 8632: interface_id 0
[
40.362216] wlan: [3252:I:TIF] ol_ath_pdev_regdmn_init: 6785:
phy id = 0 Modes supported
[
40.368637] wlan: [3252:I:TIF] ol_ath_pdev_regdmn_init: 6792:
11b = 0 11g = 0 11a = 1 11n = 1 11ac = 1 11ax = 1
[
40.376974] wlan: [3252:I:TIF] ol_ath_pdev_regdmn_init: 6801:
Reg cap - phy_id = 0 supp_bnd = 2, modes = 391f9001, lo_2g = 0, hi_2g = 0 lo_g5 = 4900, hi_5g = 5920
[
40.387222] wlan: [3252:I:ANY] ol_ath_update_wireless_modes: 1325: wireless_modes = 391f9001 before update
[
40.401537] wlan: [3252:I:ANY] ol_ath_update_wireless_modes: 1341: Wireless_modes = 391f9001 after update
[
40.411261] wlan: [3252:I:ANY] ol_ath_update_ext_caps: 1933: 11ax 5G supported case
[
40.421004] wlan: [3252:I:MBSSIE] ieee80211_mbss_attach: 220: :>
[
40.428355] wlan: [3252:I:MBSSIE] ieee80211_mbss_attach: 233: :<
[
40.434600] wlan: [3252:I:ANY] ol_resmgr_create: 223: OL Resmgr Init-ed
[
40.440691] wlan: [3252:I:ANY] acfg_attach: 3339: acfg_attach: 3339: Netlink socket created:b893ec00
[
40.446940] wlan: [3252:I:ANY] ol_ath_stats_attach: 2294: periodic_chan_stats: 1
[
40.457074] wlan: [3252:I:ANY] wlan_scan_update_channel_list: 1138: num_chan: 25
[
40.463717] wlan: [0:I:ANY] ol_ath_pdev_attach: 8948: Set global_ic[1], ptr:c62f776c
[
40.471066] wlan: [0:I:RPTR] qca_multi_link_init_module: 245:
[
40.471066] ******QCA Repeater Initialization Done***********
[
40.471066]
[
40.478802] wlan: [0:I:ANY] dp_lag_soc_enable: 102: pdev(b7c6aa04) Enabling DBDC Repeater 0
[
40.491728] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: 55: pdev(b7c6aa04) is_primary 0
[
40.500441] wlan: [0:I:ANY] ol_ath_twt_enable_complete_event_handler: 50: twt enabled
[
40.502468] wlan: [3252:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 606: cfg block channel list is empty
[
40.502474] wlan: [3252:I:ANY] ol_ath_configure_cong_ctrl_max_msdus: 3892: pdev_idx = 0 tx_desc_limit = 32768
[
40.502488] wlan: [3252:I:ANY] osif_wrap_attach: 239: osif wrap attached
[
40.502488]
[
40.502491] wlan: [3252:I:ANY] osif_wrap_devt_init: 201: osif wrap dev table init done
[
40.502491]
[
40.502495] wlan: [3252:I:ANY] osif_wrap_attach: 247:
Wrap Attached: Wrap_com =b8f70000 ic->ic_wrap_com=b8f70000 &wrap_com->wc_devt=b8f70000
[
40.502495]
[
40.502515] wlan: [3252:I:ANY] __ol_ath_attach: 4568: needed_headroom reservation 60
[
40.502722] wlan: [3252:I:ANY] ieee80211_cfg80211_radio_attach: 13328: ic: 0xb7c20500, wdev: 0xb7c37d20, wiphy: 0xbd314160, netdev: 0xb7c20000
[
40.503192] wlan: [3252:I:ANY] __ol_ath_attach: 4320: pdev_netdev name wifi1
[
40.503204] wlan: [3252:I:ANY] __ol_ath_attach: 4369: Skip txrx_pdev_attach_target
[
40.503208] wlan: [3252:I:ANY] __ol_ath_attach: 4395: BURSTING enabled by default
[
40.503245] wlan: [3252:I:ANY] ol_ath_pdev_attach: 8632: interface_id 1
[
40.503255] wlan: [3252:I:TIF] ol_ath_pdev_regdmn_init: 6785:
phy id = 1 Modes supported
[
40.503259] wlan: [3252:I:TIF] ol_ath_pdev_regdmn_init: 6792:
11b = 1 11g = 1 11a = 0 11n = 1 11ac = 1 11ax = 1
[
40.503264] wlan: [3252:I:TIF] ol_ath_pdev_regdmn_init: 6801:
Reg cap - phy_id = 1 supp_bnd = 1, modes = 680680c, lo_2g = 2312, hi_2g = 2732 lo_g5 = 0, hi_5g = 0
[
40.503267] wlan: [3252:I:ANY] ol_ath_update_wireless_modes: 1325: wireless_modes = 680680c before update
[
40.503271] wlan: [3252:I:ANY] ol_ath_update_wireless_modes: 1341: Wireless_modes = 680680c after update
[
40.503275] wlan: [3252:I:ANY] ol_ath_update_ext_caps: 1941: 11ax 2G supported case
[
40.503364] wlan: [3252:I:MBSSIE] ieee80211_mbss_attach: 220: :>
[
40.503367] wlan: [3252:I:MBSSIE] ieee80211_mbss_attach: 233: :<
[
40.503371] wlan: [3252:I:ANY] ol_resmgr_create: 223: OL Resmgr Init-ed
[
40.503464] wlan: [3252:I:ANY] acfg_attach: 3314: Offload using existing sock b893ec00
[
40.503471] wlan: [3252:I:ANY] ol_ath_stats_attach: 2294: periodic_chan_stats: 1
[
40.503683] wlan: [3252:I:ANY] wlan_scan_update_channel_list: 1138: num_chan: 11
[
40.503709] wlan: [0:I:ANY] ol_ath_pdev_attach: 8948: Set global_ic[2], ptr:c62f776c
[
40.503715] wlan: [0:I:ANY] dp_lag_soc_enable: 102: pdev(b7c6b204) Enabling DBDC Repeater 0
[
40.503720] wlan: [0:I:ANY] dp_lag_pdev_set_primary_radio: 55: pdev(b7c6b204) is_primary 0
[
40.505977] wlan: [3252:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: 606: cfg block channel list is empty
[
40.505983] wlan: [3252:I:ANY] ol_ath_configure_cong_ctrl_max_msdus: 3892: pdev_idx = 1 tx_desc_limit = 32768
[
40.505996] wlan: [3252:I:ANY] osif_wrap_attach: 239: osif wrap attached
[
40.505996]
[
40.505999] wlan: [3252:I:ANY] osif_wrap_devt_init: 201: osif wrap dev table init done
[
40.505999]
[
40.506003] wlan: [3252:I:ANY] osif_wrap_attach: 247:
Wrap Attached: Wrap_com =be1b1c00 ic->ic_wrap_com=be1b1c00 &wrap_com->wc_devt=be1b1c00
[
40.506003]
[
40.506018] wlan: [3252:I:ANY] __ol_ath_attach: 4568: needed_headroom reservation 60
[
40.506032] wlan: [3252:I:ANY] wlan_cfg80211_init: 13145: Number of 2G channels: 11
[
40.506158] wlan: [3252:I:ANY] ieee80211_cfg80211_radio_attach: 13328: ic: 0xb4ba0500, wdev: 0xb4bb7d20, wiphy: 0xbd316160, netdev: 0xb4ba0000
[
40.506575] wlan: [3252:I:Dynamic Mode Change] ol_ath_check_and_reconfig_hw_mode: 3861: Running with HW mode = 1
[
40.506818] wlan: [3252:E:QLD] qld_register: 108: Handle or address is NULL
[
40.506834] wlan: [3252:I:ANY] wlan_pdev_operation: 796: num_radios=1, wifi_radios[0].sc = b7c20500_radio_type = 2
[
40.506838] wlan: [3252:I:ANY] wlan_pdev_operation: 796: num_radios=2, wifi_radios[1].sc = b4ba0500_radio_type = 2
[
40.506859] wlan: [3252:I:ANY] init_ath_pci_3_0: 183: 6ath_ol_pci_wifi3.0 :
(Atheros/multi-bss)
[
40.859435] wlan: [0:I:ANY] ol_ath_twt_enable_complete_event_handler: 50: twt enabled
[
40.945554] vmap allocation for size 598016 failed: use vmalloc=<size> to increase size.
[
40.945868] vmap allocation for size 122880 failed: use vmalloc=<size> to increase size.
[
40.962895] wlan: [3255:I:ANY] osif_nss_register_module: 708: NSS wifi ops registered for target_type:0 with soc_ops:c8d01008
[
40.963201] wlan: [3255:I:ANY] init_ath_pci_2_0: 147: 6ath_ol_pci_2_0:
(Atheros/multi-bss)

打开wifi：uci set wireless.wifi0.disabled='0';uci commit，命令wifi或者wifi up启动wifi，打印如下：

root@OpenWrt:~# wifi
qcawifi qcawificfg80211 disable radio wifi0
error_handler received : -1
Failed to send message to driver Error:-1
'wifi1' is disabled
qcawifi qcawificfg80211 disable radio wifi1
error_handler received : -1
Failed to send message to driver Error:-1
qcawifi qcawificfg80211: enable radio wifi0
cp: can't stat '/cfg/default/*.ini': No such file or directory
[
987.750457] wlan: [5869:I:ANY] wlan_scan_update_channel_list: 1138: num_chan: 25
[
987.750712] wlan: [5869:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 3188: ieee=58 bw=80
[
987.756955] wlan: [5869:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 3188: ieee=106 bw=80
[
987.765727] wlan: [5869:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 3188: ieee=122 bw=80
[
987.774455] wlan: [5869:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 3188: ieee=138 bw=80
[
987.784643] wlan: [5869:I:ANY] wlan_scan_update_channel_list: 1138: num_chan: 25
[
987.792341] wlan: [5869:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 3188: ieee=58 bw=80
[
987.799644] wlan: [5869:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 3188: ieee=106 bw=80
[
987.808408] wlan: [5869:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 3188: ieee=122 bw=80
[
987.817178] wlan: [5869:I:dfs] WLAN_DEBUG_DFS_ALWAYS : dfs_init_precac_list: 3188: ieee=138 bw=80
[
987.826087] wlan: [5869:I:ANY] number of channels: 2G = 0 5G = 25, 6G = 0
[
987.834901] wlan: [3748:I:ANY] ol_acfg_handle_wifi_ioctl: 447: ol_acfg_handle_wifi_ioctl: req->cmd=76 not valid for radio interface, it's for VAP
Error received: -22
Could not send NL command
Enable ol_stats by default for Lithium platforms
[
987.981426] wlan: [5881:I:Monitor Filter] dp_mon_ht2_rx_ring_cfg: 119: srng type 2 Max_mac_rings 1
[
987.981499] wlan: [5881:I:Monitor Filter] dp_mon_ht2_rx_ring_cfg: 119: srng type 1 Max_mac_rings 1
[
988.011010] wlan: [5883:I:ANY] wlan_cfg80211_set_hwaddr: 7497: wlan_cfg80211_set_hwaddr :8c:88:2b:00:00:1e ret: 0
[
988.025766] wlan: [5885:I:ANY] ol_ath_set_config_param: 1650: set TXBF_SND_PERIOD: val 100 stat 0
[
988.069260] wlan: [0:I:ANY] ol_ath_set_config_param: 2442: Disconnect_timeout value: 10
[
988.083559] wlan: [0:I:ANY] ol_ath_set_config_param: 2448: Reconfiguration_timeout value:60
number of vifs: cfg023579
cfg80211: ifname: ath0 mode: __ap cfgphy: phy2
[
988.211502] wlan: [5924:I:ANY] wlan_cfg80211_add_virtual_intf: 352: proprietary mode 6 for interface: ath0 : clone params: 0x00000001
[
988.211563] wlan: [5924:I:ANY] osifp_create_wlan_vap: 9900: VDEV Create 8c:88:2b:00:00:1e
[
988.222532] wlan: [5924:I:ANY] wlan_vap_create: 1644: devhandle=0xb7c20500, opmode=IEEE80211_M_HOSTAP, flags=0x1
[
988.222532]
[
988.230881] wlan: [5924:I:ANY] ol_ath_vap_set_param: 1556: Setting SGI value: 1
[
988.242386] wlan: [5924:I:ANY] ol_ath_vap_set_param: 2609: VDEV params:HE su_bfee:1|su_bfer:1|mu_bfee:0|mu_bfer:1|dl_muofdma:1|ul_muofdma:1|ul_mumimo:1|dl_muofdma_bfer:0
[
988.249491] wlan: [5924:I:ANY] ol_ath_vap_set_param: 2622: he_bf_cap=0x7b
[
988.264760] wlan: [5924:I:ANY] ol_ath_vap_set_param: 2637: VDEV params: AC/VHT sounding mode:HE|SU/MU sounding mode:SU|Trig/Non-Trig sounding mode:Non-Trigged
[
988.271566] wlan: [5924:I:ANY] MBO Initialized
[
988.285582] wlan: [5924:I:ANY] OCE Initialized
[
988.290203] wlan: [5924:I:ANY] osif_create_vap_complete: 10120: TX Checksum:1|SG:1|TSO:1|LRO:0
[
988.297841] wlan: [5924:I:ANY] VAP device ath0 created osifp: (b3917500) os_if: (b3928000)
error_handler received : -22
Failed to send message to driver Error:-22
sh: auto: out of range
sh: out of range
sh: out of range
[
988.629512] 8021q: adding VLAN 0 to HW filter on device ath0
[
988.631065] device ath0 entered promiscuous mode
[
988.634339] br-lan: port 4(ath0) entered forwarding state
[
988.638884] br-lan: port 4(ath0) entered forwarding state
[
988.686374] wlan: [3923:I:ANY] wlan_cfg80211_do_acs: 4440: vap-0(ath0):ACS Params
[
988.686404] wlan: [3923:I:ANY] wlan_cfg80211_do_acs: 4443: ht_enabled:1|ht40_enabled:0|vht_enabled:1|hw_mode:30|chwidth:20|
[
988.692841] wlan: [3923:I:ANY] ieee80211_autoselect_infra_bss_channel: 4136: ACS started: vap:0xb3928000
OK
'wifi1' is disabled
qcawifi qcawificfg80211 disable radio wifi1
error_handler received : -1
Failed to send message to driver Error:-1
root@OpenWrt:~#
root@OpenWrt:~# [
990.635667] br-lan: port 4(ath0) entered forwarding state
[
996.383979] wlan: [3177:I:ANY] vap-0(ath0): ACS result PCH 44 freq 5220, SCH 36 freq 5180, hw_mode 2 chwidth 80, vht_seg0 42 freq 5210, vht_seg1 0 freq 0
[
996.384047] wlan: [3177:I:ANY] ieee80211_acs_scan_evhandler: 3870: lock held duration: 1(ms)
[
996.398128] wlan: [3923:I:ANY] DES SSID SET=OpenWrt
[
996.405194] wlan: [3923:I:ANY] desired hw mode: 30
[
996.409949] wlan: [3923:I:ANY] ieee80211_ucfg_set_freq_internal: 575:
[
996.409949]
Channel is configured already!!
[
996.567035] wlan: [0:I:CMN_MLME] vdev[0] ieee chan:44 freq:5220
[
996.567434] wlan: [0:I:ANY] vdev[0]: Mgt Rate:6000(kbps)
[
996.571793] wlan: [0:I:ANY] vdev[0]: Mgt Rate:6000(kbps)
root@OpenWrt:~#

查看wifi0 5G频段的信道和带宽：由于ipq6000是AX1800，所以最高只支持80MHz

root@OpenWrt:~# iw wifi0 info
Interface wifi0
ifindex 20
wdev 0x200000001
addr 8c:88:2b:00:00:1e
type AP
wiphy 2
channel 44 (5220 MHz), width: 80 MHz, center1: 5210 MHz
root@OpenWrt:~# iw wifi1 info
Interface wifi1
ifindex 21
wdev 0x300000001
addr 8c:88:2b:00:00:1f
type AP
wiphy 3
channel 1 (2412 MHz), width: 20 MHz (no HT), center1: 2412 MHz

root@OpenWrt:~# ifconfig
ath0
Link encap:Ethernet
HWaddr 8C:88:2B:00:00:1E
inet6 addr: fe80::8e88:2bff:fe00:1e/64 Scope:Link
UP BROADCAST RUNNING MULTICAST
MTU:1500
Metric:1
RX packets:83 errors:0 dropped:0 overruns:0 frame:0
TX packets:198 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:12014 (11.7 KiB)
TX bytes:29542 (28.8 KiB)
br-lan
Link encap:Ethernet
HWaddr C0:1C:30:07:AA:BC
inet addr:192.168.1.1
Bcast:192.168.1.255
Mask:255.255.255.0
inet6 addr: fe80::c21c:30ff:fe07:aabc/64 Scope:Link
UP BROADCAST RUNNING MULTICAST
MTU:1500
Metric:1
RX packets:266 errors:0 dropped:0 overruns:0 frame:0
TX packets:161 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:27022 (26.3 KiB)
TX bytes:21843 (21.3 KiB)
eth0
Link encap:Ethernet
HWaddr C0:1C:30:07:AA:BB
UP BROADCAST MULTICAST
MTU:1500
Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B)
TX bytes:0 (0.0 B)
Base address:0x1000
eth1
Link encap:Ethernet
HWaddr C0:1C:30:07:AA:BC
UP BROADCAST MULTICAST
MTU:1500
Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B)
TX bytes:0 (0.0 B)
Base address:0x1200
eth2
Link encap:Ethernet
HWaddr C0:1C:30:07:AA:BD
UP BROADCAST MULTICAST
MTU:1500
Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B)
TX bytes:0 (0.0 B)
Base address:0x1400
eth3
Link encap:Ethernet
HWaddr C0:1C:30:07:AA:BE
UP BROADCAST RUNNING MULTICAST
MTU:1500
Metric:1
RX packets:429 errors:0 dropped:0 overruns:0 frame:0
TX packets:135 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:52705 (51.4 KiB)
TX bytes:23021 (22.4 KiB)
Base address:0x1600
lo
Link encap:Local Loopback
inet addr:127.0.0.1
Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING
MTU:65536
Metric:1
RX packets:341 errors:0 dropped:0 overruns:0 frame:0
TX packets:341 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:26596 (25.9 KiB)
TX bytes:26596 (25.9 KiB)
wifi0
Link encap:UNSPEC
HWaddr 8C-88-2B-00-00-1E-00-00-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST
MTU:1500
Metric:1
RX packets:107 errors:9 dropped:0 overruns:0 frame:0
TX packets:116 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:2699
RX bytes:18426 (17.9 KiB)
TX bytes:22456 (21.9 KiB)

到此wifi功能就能正常运行，速度测试数据后续更新。

最后

以上就是背后镜子为你收集整理的IPQ6000 WIFI6无线配置和启动过程boot启动脚本wifi配置脚本qcawificfg80211配置脚本wifi启动打印的全部内容，希望文章能够帮你解决IPQ6000 WIFI6无线配置和启动过程boot启动脚本wifi配置脚本qcawificfg80211配置脚本wifi启动打印所遇到的程序开发问题。

如果觉得靠谱客网站的内容还不错，欢迎将靠谱客网站推荐给程序员好友。