我是靠谱客的博主 酷酷柚子，最近开发中收集的这篇文章主要介绍centos6.9 静默安装oracle 12c 版本号：Oracle Database 12c Release 2，觉得挺不错的，现在分享给大家，希望可以做个参考。
概述
centos6.9 静默安装oracle 12c 版本号：Oracle Database 12c Release 2
- 错误记录
- 错误记录
- 错误记录
(12.2.0.1.0) - Standard Edition 2 and Enterprise Edition)
- 本教程，安装时间 2019-09-24，由于网上资料不是很多，主要就是配置文件这问题挺多，故做一个汇总及一些安装时的小问题。64内存服务器，硬盘1T
正文：
附oracle
下载地址：中文官网下载慢，最好使用英文官网下载
oracle下载地址
- 首先确认自己系统版本及操作是什么
lsb_release -a
- 关闭防火墙，有时会说端口怎么怎么~一般都是防火墙没关
- 安装oracle 所需要的库，你也可以多看看其他人的文章，尽量一次安装全，防止安装时出错~
检查
rpm -q binutils compat-libcap1 compat-libstdc++-33 gcc gcc-c++ glibc glibc-devel ksh libaio libaio-devel libgcc libstdc++ libstdc++-devel libXext libXtst libX11 libXau libxcb libXi make sysstat
安装
yum install -y compat-libcap1 compat-libstdc++-33 libaio-devel libXext libXtst libX11 libXau libxcb libXi sysstat
- 创建oracle 用户及组
groupadd oinstall
groupadd oper
groupadd dba
useradd -g oinstall -G dba,oper oracle
# 修改密码
passwd oracle
- 修改系统参数
需要注意的是~
根据你服务器内存填写，
kernel.shmall = 2097152 gb转换成b在除以4，单位b
kernel.shmmax = 536870912 服务器内存的一半，单位也是b
vi /etc/sysctl.conf
fs.aio-max-nr = 1048576
fs.file-max = 6815744
kernel.shmall = 2097152
kernel.shmmax = 536870912
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
net.ipv4.ip_local_port_range = 9000 65500
net.core.rmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048586
修改后我的文件
fs.aio-max-nr = 1048576
fs.file-max = 6815744
kernel.shmall = 137438953472
kernel.shmmax = 34359738368
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
net.ipv4.ip_local_port_range = 9000 65500
net.core.rmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048586
kernel.pid_max = 1000000
生效
/sbin/sysctl -p
修改/etc/pam.d/login 文件
session required /lib/security/pam_limits.so
session required pam_limits.so
- 修改用户Limits
vi /etc/security/limits.conf
oracle soft nofile 65536
oracle hard nofile 65536
oracle soft nproc 16384
oracle hard nproc 16384
oracle stack nproc 10240
oracle stack nproc 10240
- 创建相关目录
这里根据你的实际情况填写，最好是最大的那个文件夹，oracle 数据文件，什么的都在这里， app后面的都不动，改前缀文件夹名称
mkdir -p /u01/app/oracle/product/12c/db_1
mkdir -p /u01/app/oracle/oradata
mkdir -p /home/app/oracle/oraInventory
mkdir -p /u01/app/oracle/flash_recovery_area
mkdir -p /u01/app/oracle/archlog
修改安装文件权限
chown -R oracle:oinstall /u01
- 编辑 /etc/profile
if [ $USER = "oracle" ]; then
if [ $SHELL = "/bin/ksh" ]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
fi
- 配置oracle用户环境变量
su - oracle
vi .bash_profile
根据上面你的创建的文件夹填写，目录部分也是修改文件夹前缀，app后面的不改
COLUMNS=132; export COLUMNS
LINES=47; export LINES
EDITOR=vi; export EDITOR
TMP=/tmp; export TMP
TMPDIR=$TMP; export TMPDIR
ORACLE_BASE=/u01/app/oracle; export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/product/12c/db_1; export ORACLE_HOME
ORACLE_SID=orcl; export ORACLE_SID
SHLIB_PATH=$LD_LIBRARY_PATH;export SHLIB_PATH
NLS_LANG=American_America.zhs16gbk;export NLS_LANG
ORA_NLS10=$ORACLE_HOME/nls/data;export ORA_NLS10
TNS_ADMIN=$ORACLE_HOME/network/admin;export TNS_ADMIN
ORACLE_TERM=xterm; export ORACLE_TERM
PATH=/usr/sbin:$PATH; export PATH
PATH=$ORACLE_HOME/bin:$PATH; export PATH
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib; export LD_LIBRARY_PATH
CLASSPATH=$ORACLE_HOME/jre:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib; export CLASSPATH
alias glance=/opt/perf/bin/glance:x
alias gohome='cd /u01/app/oracle/product/10.2.0'
alias cdb='cd /u01/app/oracle/admin/orcl/bdump'
alias cdu='cd /u01/app/oracle/admin/orcl/udump'
使其生效
source .bash_profile
- 修改/etc/hosts
在切回root用户
exit
这里，是有小坑的地方的，和配置监听有关系，这里不对的话监听服务找不到对应的ip及系统用户名
，启动监听的时候， 一直会说如何如何端口不对啦，无法分配内存等，多半是这的问题~
vi /etc/hosts
我最后的方案是，把原来关于本地的配置都配置成locathost，127.0.0 等等 一般就俩行，有域名与ip的 记得也在这加上
xxx.xxx.xxx.xxx your_host_name
例：
127.0.0.0 locathost
- List item
如果系统没有swap记得加大点，安装oracle的时候要求这个呢~有的无视
- 上传oracle12c安装文件到你你设置的前缀文件夹内
- 解压oracle 安装zip包
没有的unzip命令的自己安装一下
unzip XXXX.zip
- 在把解压出来的文件夹授权
chown -R oracle:oinstall xxx/database/
- 切换oracle用户，编辑安装配置文件
最好自己备份一下，cp XXX XXX,back
vim XXX/database/response/db_install.rsp
这个文件里面关于用户组配置这些和11G或其他版本有所修改，所以一般不要直接复制教程里面的配置文件，最好自己打开自己解压开的文件里面对应路径的文件，自己对比的修改，避免不必要的麻烦及错误~
我本次安装的文件，dba哪里必须都填写，本版本增加了新的群组
opyright(c) Oracle Corporation 1998,2017. All rights reserved.##
## ##
## Specify values for the variables listed below to customize ##
## your installation. ##
## ##
## Each variable is associated with a comment. The comment ##
## can help to populate the variables with the appropriate ##
## values. ##
## ##
## IMPORTANT NOTE: This file contains plain text passwords and ##
## should be secured to have read permission only by oracle user ##
## or db administrator who owns this installation. ##
## ##
####################################################################
#-------------------------------------------------------------------------------
# Do not change the following system generated value.
#-------------------------------------------------------------------------------
oracle.install.responseFileVersion=/oracle/install/rspfmt_dbinstall_response_schema_v12.2.0
#-------------------------------------------------------------------------------
# Specify the installation option.
# It can be one of the following:
# - INSTALL_DB_SWONLY
# - INSTALL_DB_AND_CONFIG
# - UPGRADE_DB
#-------------------------------------------------------------------------------
oracle.install.option=INSTALL_DB_SWONLY
#-------------------------------------------------------------------------------
# Specify the Unix group to be set for the inventory directory.
#-------------------------------------------------------------------------------
UNIX_GROUP_NAME=oinstall
#-------------------------------------------------------------------------------
# Specify the location which holds the inventory files.
# This is an optional parameter if installing on
# Windows based Operating System.
#-------------------------------------------------------------------------------
INVENTORY_LOCATION=/ruitefiles/home/app/oraInventory
#-------------------------------------------------------------------------------
# Specify the complete path of the Oracle Home.
#-------------------------------------------------------------------------------
ORACLE_HOME=/ruitefiles/home/app/oracle/product/12c/db_1
#-------------------------------------------------------------------------------
# Specify the complete path of the Oracle Base.
#-------------------------------------------------------------------------------
ORACLE_BASE=/ruitefiles/home/app/oracle
#-------------------------------------------------------------------------------
# Specify the installation edition of the component.
#
# The value should contain only one of these choices.
# - EE : Enterprise Edition
# - SE2 : Standard Edition 2
#-------------------------------------------------------------------------------
oracle.install.db.InstallEdition=EE
###############################################################################
# #
# PRIVILEGED OPERATING SYSTEM GROUPS #
# ------------------------------------------ #
# Provide values for the OS groups to which SYSDBA and SYSOPER privileges #
# needs to be granted. If the install is being performed as a member of the #
# group "dba", then that will be used unless specified otherwise below. #
# #
# The value to be specified for OSDBA and OSOPER group is only for UNIX based #
# Operating System. #
# #
###############################################################################
#------------------------------------------------------------------------------
# The OSDBA_GROUP is the OS group which is to be granted SYSDBA privileges.
#-------------------------------------------------------------------------------
oracle.install.db.OSDBA_GROUP=dba
#------------------------------------------------------------------------------
# The OSOPER_GROUP is the OS group which is to be granted SYSOPER privileges.
# The value to be specified for OSOPER group is optional.
#------------------------------------------------------------------------------
oracle.install.db.OSOPER_GROUP=oper
#------------------------------------------------------------------------------
# The OSBACKUPDBA_GROUP is the OS group which is to be granted SYSBACKUP privileges.
#------------------------------------------------------------------------------
oracle.install.db.OSBACKUPDBA_GROUP=dba
#------------------------------------------------------------------------------
# The OSDGDBA_GROUP is the OS group which is to be granted SYSDG privileges.
#------------------------------------------------------------------------------
oracle.install.db.OSDGDBA_GROUP=dba
#------------------------------------------------------------------------------
# The OSKMDBA_GROUP is the OS group which is to be granted SYSKM privileges.
#------------------------------------------------------------------------------
oracle.install.db.OSKMDBA_GROUP=dba
#------------------------------------------------------------------------------
# The OSRACDBA_GROUP is the OS group which is to be granted SYSRAC privileges.
#------------------------------------------------------------------------------
oracle.install.db.OSRACDBA_GROUP=dba
###############################################################################
# #
# Grid Options #
# #
###############################################################################
#------------------------------------------------------------------------------
# Specify the type of Real Application Cluster Database
#
# - ADMIN_MANAGED: Admin-Managed
# - POLICY_MANAGED: Policy-Managed
#
# If left unspecified, default will be ADMIN_MANAGED
#------------------------------------------------------------------------------
oracle.install.db.rac.configurationType=
#------------------------------------------------------------------------------
# Value is required only if RAC database type is ADMIN_MANAGED
#
# Specify the cluster node names selected during the installation.
# Leaving it blank will result in install on local server only (Single Instance)
#
# Example : oracle.install.db.CLUSTER_NODES=node1,node2
#------------------------------------------------------------------------------
oracle.install.db.CLUSTER_NODES=
#------------------------------------------------------------------------------
# This variable is used to enable or disable RAC One Node install.
#
# - true : Value of RAC One Node service name is used.
# - false : Value of RAC One Node service name is not used.
#
# If left blank, it will be assumed to be false.
#------------------------------------------------------------------------------
oracle.install.db.isRACOneInstall=
#------------------------------------------------------------------------------
# Value is required only if oracle.install.db.isRACOneInstall is true.
#
# Specify the name for RAC One Node Service
#------------------------------------------------------------------------------
oracle.install.db.racOneServiceName=
#------------------------------------------------------------------------------
# Value is required only if RAC database type is POLICY_MANAGED
#
# Specify a name for the new Server pool that will be configured
# Example : oracle.install.db.rac.serverpoolName=pool1
#------------------------------------------------------------------------------
oracle.install.db.rac.serverpoolName=
#------------------------------------------------------------------------------
# Value is required only if RAC database type is POLICY_MANAGED
#
# Specify a number as cardinality for the new Server pool that will be configured
# Example : oracle.install.db.rac.serverpoolCardinality=2
#------------------------------------------------------------------------------
oracle.install.db.rac.serverpoolCardinality=
###############################################################################
# #
# Database Configuration Options #
# #
###############################################################################
#-------------------------------------------------------------------------------
# Specify the type of database to create.
# It can be one of the following:
# - GENERAL_PURPOSE
# - DATA_WAREHOUSE
# GENERAL_PURPOSE: A starter database designed for general purpose use or transaction-heavy applications.
# DATA_WAREHOUSE : A starter database optimized for data warehousing applications.
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.type=
#-------------------------------------------------------------------------------
# Specify the Starter Database Global Database Name.
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.globalDBName=orcl
#-------------------------------------------------------------------------------
# Specify the Starter Database SID.
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.SID=orcl
#-------------------------------------------------------------------------------
# Specify whether the database should be configured as a Container database.
# The value can be either "true" or "false". If left blank it will be assumed
# to be "false".
#-------------------------------------------------------------------------------
oracle.install.db.ConfigureAsContainerDB=
#-------------------------------------------------------------------------------
# Specify the Pluggable Database name for the pluggable database in Container Database.
#-------------------------------------------------------------------------------
oracle.install.db.config.PDBName=
#-------------------------------------------------------------------------------
# Specify the Starter Database character set.
#
# One of the following
# AL32UTF8, WE8ISO8859P15, WE8MSWIN1252, EE8ISO8859P2,
# EE8MSWIN1250, NE8ISO8859P10, NEE8ISO8859P4, BLT8MSWIN1257,
# BLT8ISO8859P13, CL8ISO8859P5, CL8MSWIN1251, AR8ISO8859P6,
# AR8MSWIN1256, EL8ISO8859P7, EL8MSWIN1253, IW8ISO8859P8,
# IW8MSWIN1255, JA16EUC, JA16EUCTILDE, JA16SJIS, JA16SJISTILDE,
# KO16MSWIN949, ZHS16GBK, TH8TISASCII, ZHT32EUC, ZHT16MSWIN950,
# ZHT16HKSCS, WE8ISO8859P9, TR8MSWIN1254, VN8MSWIN1258
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.characterSet=ZHS16GBK
#------------------------------------------------------------------------------
# This variable should be set to true if Automatic Memory Management
# in Database is desired.
# If Automatic Memory Management is not desired, and memory allocation
# is to be done manually, then set it to false.
#------------------------------------------------------------------------------
oracle.install.db.config.starterdb.memoryOption=true
#-------------------------------------------------------------------------------
# Specify the total memory allocation for the database. Value(in MB) should be
# at least 256 MB, and should not exceed the total physical memory available
# on the system.
# Example: oracle.install.db.config.starterdb.memoryLimit=512
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.memoryLimit=
#-------------------------------------------------------------------------------
# This variable controls whether to load Example Schemas onto
# the starter database or not.
# The value can be either "true" or "false". If left blank it will be assumed
# to be "false".
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.installExampleSchemas=
###############################################################################
# #
# Passwords can be supplied for the following four schemas in the #
# starter database: #
# SYS #
# SYSTEM #
# DBSNMP (used by Enterprise Manager) #
# #
# Same password can be used for all accounts (not recommended) #
# or different passwords for each account can be provided (recommended) #
# #
###############################################################################
#------------------------------------------------------------------------------
# This variable holds the password that is to be used for all schemas in the
# starter database.
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.password.ALL=oracle
#-------------------------------------------------------------------------------
# Specify the SYS password for the starter database.
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.password.SYS=
#-------------------------------------------------------------------------------
# Specify the SYSTEM password for the starter database.
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.password.SYSTEM=
#-------------------------------------------------------------------------------
# Specify the DBSNMP password for the starter database.
# Applicable only when oracle.install.db.config.starterdb.managementOption=CLOUD_CONTROL
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.password.DBSNMP=
#-------------------------------------------------------------------------------
# Specify the PDBADMIN password required for creation of Pluggable Database in the Container Database.
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.password.PDBADMIN=
#-------------------------------------------------------------------------------
# Specify the management option to use for managing the database.
# Options are:
# 1. CLOUD_CONTROL - If you want to manage your database with Enterprise Manager Cloud Control along with Database Express.
# 2. DEFAULT -If you want to manage your database using the default Database Express option.
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.managementOption=
#-------------------------------------------------------------------------------
# Specify the OMS host to connect to Cloud Control.
# Applicable only when oracle.install.db.config.starterdb.managementOption=CLOUD_CONTROL
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.omsHost=
#-------------------------------------------------------------------------------
# Specify the OMS port to connect to Cloud Control.
# Applicable only when oracle.install.db.config.starterdb.managementOption=CLOUD_CONTROL
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.omsPort=
#-------------------------------------------------------------------------------
# Specify the EM Admin user name to use to connect to Cloud Control.
# Applicable only when oracle.install.db.config.starterdb.managementOption=CLOUD_CONTROL
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.emAdminUser=
#-------------------------------------------------------------------------------
# Specify the EM Admin password to use to connect to Cloud Control.
# Applicable only when oracle.install.db.config.starterdb.managementOption=CLOUD_CONTROL
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.emAdminPassword=
###############################################################################
# #
# SPECIFY RECOVERY OPTIONS #
# ------------------------------------ #
# Recovery options for the database can be mentioned using the entries below #
# #
###############################################################################
#------------------------------------------------------------------------------
# This variable is to be set to false if database recovery is not required. Else
# this can be set to true.
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.enableRecovery=true
#-------------------------------------------------------------------------------
# Specify the type of storage to use for the database.
# It can be one of the following:
# - FILE_SYSTEM_STORAGE
# - ASM_STORAGE
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.storageType=FILE_SYSTEM_STORAGE
#-------------------------------------------------------------------------------
# Specify the database file location which is a directory for datafiles, control
# files, redo logs.
#
# Applicable only when oracle.install.db.config.starterdb.storage=FILE_SYSTEM_STORAGE
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.fileSystemStorage.dataLocation=/ruitefiles/home/app/oracle/oradata
#-------------------------------------------------------------------------------
# Specify the recovery location.
#
# Applicable only when oracle.install.db.config.starterdb.storage=FILE_SYSTEM_STORAGE
#-------------------------------------------------------------------------------
oracle.install.db.config.starterdb.fileSystemStorage.recoveryLocation=/ruitefiles/home/app/oracle/flash_recovery_area
#-------------------------------------------------------------------------------
# Specify the existing ASM disk groups to be used for storage.
#
# Applicable only when oracle.install.db.config.starterdb.storageType=ASM_STORAGE
#-------------------------------------------------------------------------------
oracle.install.db.config.asm.diskGroup=
#-------------------------------------------------------------------------------
# Specify the password for ASMSNMP user of the ASM instance.
#
# Applicable only when oracle.install.db.config.starterdb.storage=ASM_STORAGE
#-------------------------------------------------------------------------------
oracle.install.db.config.asm.ASMSNMPPassword=
#------------------------------------------------------------------------------
# Specify the My Oracle Support Account Username.
#
# Example : MYORACLESUPPORT_USERNAME=abc@oracle.com
#------------------------------------------------------------------------------
MYORACLESUPPORT_USERNAME=
#------------------------------------------------------------------------------
# Specify the My Oracle Support Account Username password.
#
# Example : MYORACLESUPPORT_PASSWORD=password
#------------------------------------------------------------------------------
MYORACLESUPPORT_PASSWORD=
#------------------------------------------------------------------------------
# Specify whether to enable the user to set the password for
# My Oracle Support credentials. The value can be either true or false.
# If left blank it will be assumed to be false.
#
# Example : SECURITY_UPDATES_VIA_MYORACLESUPPORT=true
#------------------------------------------------------------------------------
SECURITY_UPDATES_VIA_MYORACLESUPPORT=
#------------------------------------------------------------------------------
# Specify whether user doesn't want to configure Security Updates.
# The value for this variable should be true if you don't want to configure
# Security Updates, false otherwise.
#
# The value can be either true or false. If left blank it will be assumed
# to be true.
#
# Example : DECLINE_SECURITY_UPDATES=false
#------------------------------------------------------------------------------
DECLINE_SECURITY_UPDATES=true
#------------------------------------------------------------------------------
# Specify the Proxy server name. Length should be greater than zero.
#
# Example : PROXY_HOST=proxy.domain.com
#------------------------------------------------------------------------------
PROXY_HOST=
#------------------------------------------------------------------------------
# Specify the proxy port number. Should be Numeric and at least 2 chars.
#
# Example : PROXY_PORT=25
#------------------------------------------------------------------------------
PROXY_PORT=
#------------------------------------------------------------------------------
# Specify the proxy user name. Leave PROXY_USER and PROXY_PWD
# blank if your proxy server requires no authentication.
#
# Example : PROXY_USER=username
#------------------------------------------------------------------------------
PROXY_USER=
#------------------------------------------------------------------------------
# Specify the proxy password. Leave PROXY_USER and PROXY_PWD
# blank if your proxy server requires no authentication.
#
# Example : PROXY_PWD=password
#------------------------------------------------------------------------------
PROXY_PWD=
#------------------------------------------------------------------------------
# Specify the Oracle Support Hub URL.
#
# Example : COLLECTOR_SUPPORTHUB_URL=https://orasupporthub.company.com:8080/
#------------------------------------------------------------------------------
COLLECTOR_SUPPORTHUB_URL=
- 切换oracle用户，执行安装命令
cd XXX/database/
./runInstaller -silent -ignorePrereq -responseFile /XXX/databse/db_install.rsp
如果安装成功会提示类似这样的字样，是英文的，这是翻译~
/可以实时跟踪查看安装日志，了解安装的进度。
//当出现如下的字样，即可按照说明在另一个窗口中以root操作：
以下配置脚本需要以 "root" 用户的身份执行。
#!/bin/sh
#要运行的 Root 脚本
/home/app/oracle/oraInventory/orainstRoot.sh
/home/app/oracle/product/11.2.0/dbhome_1/root.sh
要执行配置脚本, 请执行以下操作:
1. 打开一个终端窗口
2. 以 "root" 身份登录
3. 运行脚本
4. 返回此窗口并按 "Enter" 键继续
Successfully Setup Software.
新打开一个终端使用root执行提示的脚本，分别上面提示的这俩root.sh , orainstRoot.sh
执行完成后，在返回之前那个窗口，按下回车键
错误记录
**
提示文件在安装不成功的有提示，用新窗口打开看看日志
- 提示说文件无效，找不到你刚写的配置文件怎么怎么~ 人话就是：其实就是提示你的配置文件写的有错误。这个时间建议你找一篇翻译过来的配置文件参照的我提供的结合的写。多试几次，安装不成功不用重装环境变量啥的，这里我就费时间了。
- 提示说内存太小云云怎么的，人话就是：swap太小了，你新建一下swap大点，结合你实际情况配置，有最低要求oracle
还有就是内核哪里，也配置一下大小，我上面说过。注意
**
----如果想重新安装-----
rm -rf XXX/app/oraInventory
cd $ORACLE_HOME
rm *
在新建一下一开始的文件夹
mkdir -p XXX/app/oraInventory
- 创建数据库
编辑建库配置文件
vim XXX/databse/response/dbca.rsp
我的
##############################################################################
## ##
## DBCA response file ##
## ------------------ ##
## Copyright(c) Oracle Corporation 1998,2017. All rights reserved. ##
## ##
## Specify values for the variables listed below to customize ##
## your installation. ##
## ##
## Each variable is associated with a comment. The comment ##
## can help to populate the variables with the appropriate ##
## values. ##
## ##
## IMPORTANT NOTE: This file contains plain text passwords and ##
## should be secured to have read permission only by oracle user ##
## or db administrator who owns this installation. ##
##############################################################################
#-------------------------------------------------------------------------------
# Do not change the following system generated value.
#-------------------------------------------------------------------------------
responseFileVersion=/oracle/assistants/rspfmt_dbca_response_schema_v12.2.0
#-----------------------------------------------------------------------------
# Name : gdbName
# Datatype : String
# Description : Global database name of the database
# Valid values : <db_name>.<db_domain> - when database domain isn't NULL
# <db_name> - when database domain is NULL
# Default value : None
# Mandatory : Yes
#-----------------------------------------------------------------------------
gdbName=orcl
#-----------------------------------------------------------------------------
# Name : sid
# Datatype : String
# Description : System identifier (SID) of the database
# Valid values : Check Oracle12c Administrator's Guide
# Default value : <db_name> specified in GDBNAME
# Mandatory : No
#-----------------------------------------------------------------------------
sid=orcl
#-----------------------------------------------------------------------------
# Name : databaseConfigType
# Datatype : String
# Description : database conf type as Single Instance, Real Application Cluster or Real Application Cluster One Nodes database
# Valid values : SIRACRACONENODE
# Default value : SI
# Mandatory : No
#-----------------------------------------------------------------------------
databaseConfigType=
#-----------------------------------------------------------------------------
# Name : RACOneNodeServiceName
# Datatype : String
# Description : Service is required by application to connect to RAC One
# Node Database
# Valid values : Service Name
# Default value : None
# Mandatory : No [required in case DATABASECONFTYPE is set to RACONENODE ]
#-----------------------------------------------------------------------------
RACOneNodeServiceName=
#-----------------------------------------------------------------------------
# Name : policyManaged
# Datatype : Boolean
# Description : Set to true if Database is policy managed and
# set to false if Database is admin managed
# Valid values : TRUEFALSE
# Default value : FALSE
# Mandatory : No
#-----------------------------------------------------------------------------
policyManaged=
#-----------------------------------------------------------------------------
# Name : createServerPool
# Datatype : Boolean
# Description : Set to true if new server pool need to be created for database
# if this option is specified then the newly created database
# will use this newly created serverpool.
# Multiple serverpoolname can not be specified for database
# Valid values : TRUEFALSE
# Default value : FALSE
# Mandatory : No
#-----------------------------------------------------------------------------
createServerPool=
#-----------------------------------------------------------------------------
# Name : serverPoolName
# Datatype : String
# Description : Only one serverpool name need to be specified
# if Create Server Pool option is specified.
# Comma-separated list of Serverpool names if db need to use
# multiple Server pool
# Valid values : ServerPool name
# Default value : None
# Mandatory : No [required in case of RAC service centric database]
#-----------------------------------------------------------------------------
serverPoolName=
#-----------------------------------------------------------------------------
# Name : cardinality
# Datatype : Number
# Description : Specify Cardinality for create server pool operation
# Valid values : any positive Integer value
# Default value : Number of qualified nodes on cluster
# Mandatory : No [Required when a new serverpool need to be created]
#-----------------------------------------------------------------------------
cardinality=
#-----------------------------------------------------------------------------
# Name : force
# Datatype : Boolean
# Description : Set to true if new server pool need to be created by force
# if this option is specified then the newly created serverpool
# will be assigned server even if no free servers are available.
# This may affect already running database.
# This flag can be specified for Admin managed as well as policy managed db.
# Valid values : TRUEFALSE
# Default value : FALSE
# Mandatory : No
#-----------------------------------------------------------------------------
force=
#-----------------------------------------------------------------------------
# Name : pqPoolName
# Datatype : String
# Description : Only one serverpool name needs to be specified
# if create server pool option is specified.
# Comma-separated list of serverpool names if use
# server pool. This is required to
# create Parallel Query (PQ) database. Applicable to Big Cluster
# Valid values : Parallel Query (PQ) pool name
# Default value : None
# Mandatory : No [required in case of RAC service centric database]
#-----------------------------------------------------------------------------
pqPoolName=
#-----------------------------------------------------------------------------
# Name : pqCardinality
# Datatype : Number
# Description : Specify Cardinality for create server pool operation.
# Applicable to Big Cluster
# Valid values : any positive Integer value
# Default value : Number of qualified nodes on cluster
# Mandatory : No [Required when a new serverpool need to be created]
#-----------------------------------------------------------------------------
pqCardinality=
#-----------------------------------------------------------------------------
# Name : createAsContainerDatabase
# Datatype : boolean
# Description : flag to create database as container database
# Valid values : Check Oracle12c Administrator's Guide
# Default value : false
# Mandatory : No
#-----------------------------------------------------------------------------
createAsContainerDatabase=
#-----------------------------------------------------------------------------
# Name : numberOfPDBs
# Datatype : Number
# Description : Specify the number of pdb to be created
# Valid values : 0 to 4094
# Default value : 0
# Mandatory : No
#-----------------------------------------------------------------------------
numberOfPDBs=
#-----------------------------------------------------------------------------
# Name : pdbName
# Datatype : String
# Description : Specify the pdbname/pdbanme prefix if one or more pdb need to be created
# Valid values : Check Oracle12c Administrator's Guide
# Default value : None
# Mandatory : No
#-----------------------------------------------------------------------------
pdbName=
#-----------------------------------------------------------------------------
# Name : useLocalUndoForPDBs
# Datatype : boolean
# Description : Flag to create local undo tablespace for all PDB's.
# Valid values : TRUEFALSE
# Default value : TRUE
# Mandatory : No
#-----------------------------------------------------------------------------
useLocalUndoForPDBs=
#-----------------------------------------------------------------------------
# Name : pdbAdminPassword
# Datatype : String
# Description : PDB Administrator user password
# Valid values : Check Oracle12c Administrator's Guide
# Default value : None
# Mandatory : No
#-----------------------------------------------------------------------------
pdbAdminPassword=
#-----------------------------------------------------------------------------
# Name : nodelist
# Datatype : String
# Description : Comma-separated list of cluster nodes
# Valid values : Cluster node names
# Default value : None
# Mandatory : No (Yes for RAC database-centric database )
#-----------------------------------------------------------------------------
nodelist=
#-----------------------------------------------------------------------------
# Name : templateName
# Datatype : String
# Description : Name of the template
# Valid values : Template file name
# Default value : None
# Mandatory : Yes
#-----------------------------------------------------------------------------
templateName=General_Purpose.dbc
#-----------------------------------------------------------------------------
# Name : sysPassword
# Datatype : String
# Description : Password for SYS user
# Valid values : Check Oracle12c Administrator's Guide
# Default value : None
# Mandatory : Yes
#-----------------------------------------------------------------------------
sysPassword=oracle
#-----------------------------------------------------------------------------
# Name : systemPassword
# Datatype : String
# Description : Password for SYSTEM user
# Valid values : Check Oracle12c Administrator's Guide
# Default value : None
# Mandatory : Yes
#-----------------------------------------------------------------------------
systemPassword=oracle
#-----------------------------------------------------------------------------
# Name : oracleHomeUserPassword
# Datatype : String
# Description : Password for Windows Service user
# Default value : None
# Mandatory : If Oracle home is installed with windows service user
#-----------------------------------------------------------------------------
oracleHomeUserPassword=
#-----------------------------------------------------------------------------
# Name : emConfiguration
# Datatype : String
# Description : Enterprise Manager Configuration Type
# Valid values : CENTRAL|DBEXPRESS|BOTH|NONE
# Default value : NONE
# Mandatory : No
#-----------------------------------------------------------------------------
emConfiguration=
#-----------------------------------------------------------------------------
# Name : emExpressPort
# Datatype : Number
# Description : Enterprise Manager Configuration Type
# Valid values : Check Oracle12c Administrator's Guide
# Default value : NONE
# Mandatory : No, will be picked up from DBEXPRESS_HTTPS_PORT env variable
# or auto generates a free port between 5500 and 5599
#-----------------------------------------------------------------------------
emExpressPort=5500
#-----------------------------------------------------------------------------
# Name : runCVUChecks
# Datatype : Boolean
# Description : Specify whether to run Cluster Verification Utility checks
# periodically in Cluster environment
# Valid values : TRUEFALSE
# Default value : FALSE
# Mandatory : No
#-----------------------------------------------------------------------------
runCVUChecks=
#-----------------------------------------------------------------------------
# Name : dbsnmpPassword
# Datatype : String
# Description : Password for DBSNMP user
# Valid values : Check Oracle12c Administrator's Guide
# Default value : None
# Mandatory : Yes, if emConfiguration is specified or
# the value of runCVUChecks is TRUE
#-----------------------------------------------------------------------------
dbsnmpPassword=oracle
#-----------------------------------------------------------------------------
# Name : omsHost
# Datatype : String
# Description : EM management server host name
# Default value : None
# Mandatory : Yes, if CENTRAL is specified for emConfiguration
#-----------------------------------------------------------------------------
omsHost=
#-----------------------------------------------------------------------------
# Name : omsPort
# Datatype : Number
# Description : EM management server port number
# Default value : None
# Mandatory : Yes, if CENTRAL is specified for emConfiguration
#-----------------------------------------------------------------------------
omsPort=
#-----------------------------------------------------------------------------
# Name : emUser
# Datatype : String
# Description : EM Admin username to add or modify targets
# Default value : None
# Mandatory : Yes, if CENTRAL is specified for emConfiguration
#-----------------------------------------------------------------------------
emUser=
#-----------------------------------------------------------------------------
# Name : emPassword
# Datatype : String
# Description : EM Admin user password
# Default value : None
# Mandatory : Yes, if CENTRAL is specified for emConfiguration
#-----------------------------------------------------------------------------
emPassword=
#-----------------------------------------------------------------------------
# Name : dvConfiguration
# Datatype : Boolean
# Description : Specify "True" to configure and enable Oracle Database vault
# Valid values : True/False
# Default value : False
# Mandatory : No
#-----------------------------------------------------------------------------
dvConfiguration=
#-----------------------------------------------------------------------------
# Name : dvUserName
# Datatype : String
# Description : DataVault Owner
# Valid values : Check Oracle12c Administrator's Guide
# Default value : None
# Mandatory : Yes, if DataVault option is chosen
#-----------------------------------------------------------------------------
dvUserName=
#-----------------------------------------------------------------------------
# Name : dvUserPassword
# Datatype : String
# Description : Password for DataVault Owner
# Valid values : Check Oracle12c Administrator's Guide
# Default value : None
# Mandatory : Yes, if DataVault option is chosen
#-----------------------------------------------------------------------------
dvUserPassword=
#-----------------------------------------------------------------------------
# Name : dvAccountManagerName
# Datatype : String
# Description : DataVault Account Manager
# Valid values : Check Oracle12c Administrator's Guide
# Default value : None
# Mandatory : No
#-----------------------------------------------------------------------------
dvAccountManagerName=
#-----------------------------------------------------------------------------
# Name : dvAccountManagerPassword
# Datatype : String
# Description : Password for DataVault Account Manager
# Valid values : Check Oracle12c Administrator's Guide
# Default value : None
# Mandatory : No
#-----------------------------------------------------------------------------
dvAccountManagerPassword=
#-----------------------------------------------------------------------------
# Name : olsConfiguration
# Datatype : Boolean
# Description : Specify "True" to configure and enable Oracle Label Security
# Valid values : True/False
# Default value : False
# Mandatory : No
#-----------------------------------------------------------------------------
olsConfiguration=
#-----------------------------------------------------------------------------
# Name : datafileJarLocation
# Datatype : String
# Description : Location of the data file jar
# Valid values : Directory containing compressed datafile jar
# Default value : None
# Mandatory : No
#-----------------------------------------------------------------------------
datafileJarLocation=
#-----------------------------------------------------------------------------
# Name : datafileDestination
# Datatype : String
# Description : Location of the data file's
# Valid values : Directory for all the database files
# Default value : $ORACLE_BASE/oradata
# Mandatory : No
#-----------------------------------------------------------------------------
#datafileDestination=
#-----------------------------------------------------------------------------
# Name : recoveryAreaDestination
# Datatype : String
# Description : Location of the data file's
# Valid values : Recovery Area location
# Default value : $ORACLE_BASE/flash_recovery_area
# Mandatory : No
#-----------------------------------------------------------------------------
#recoveryAreaDestination=$ORACLE_BASE/flash_recovery_area
#-----------------------------------------------------------------------------
# Name : storageType
# Datatype : String
# Description : Specifies the storage on which the database is to be created
# Valid values : FS (CFS for RAC), ASM
# Default value : FS
# Mandatory : No
#-----------------------------------------------------------------------------
storageType=
#-----------------------------------------------------------------------------
# Name : diskGroupName
# Datatype : String
# Description : Specifies the disk group name for the storage
# Default value : DATA
# Mandatory : No
#-----------------------------------------------------------------------------
diskGroupName=
#-----------------------------------------------------------------------------
# Name : asmsnmpPassword
# Datatype : String
# Description : Password for ASM Monitoring
# Default value : None
# Mandatory : No
#-----------------------------------------------------------------------------
asmsnmpPassword=
#-----------------------------------------------------------------------------
# Name : recoveryGroupName
# Datatype : String
# Description : Specifies the disk group name for the recovery area
# Default value : RECOVERY
# Mandatory : No
#-----------------------------------------------------------------------------
recoveryGroupName=
#-----------------------------------------------------------------------------
# Name : characterSet
# Datatype : String
# Description : Character set of the database
# Valid values : Check Oracle12c National Language Support Guide
# Default value : "US7ASCII"
# Mandatory : NO
#-----------------------------------------------------------------------------
characterSet=ZHS16GBK
#-----------------------------------------------------------------------------
# Name : nationalCharacterSet
# Datatype : String
# Description : National Character set of the database
# Valid values : "UTF8" or "AL16UTF16". For details, check Oracle12c National Language Support Guide
# Default value : "AL16UTF16"
# Mandatory : No
#-----------------------------------------------------------------------------
nationalCharacterSet=
#-----------------------------------------------------------------------------
# Name : registerWithDirService
# Datatype : Boolean
# Description : Specifies whether to register with Directory Service.
# Valid values : TRUE FALSE
# Default value : FALSE
# Mandatory : No
#-----------------------------------------------------------------------------
registerWithDirService=
#-----------------------------------------------------------------------------
# Name : dirServiceUserName
# Datatype : String
# Description : Specifies the name of the directory service user
# Mandatory : YES, if the value of registerWithDirService is TRUE
#-----------------------------------------------------------------------------
dirServiceUserName=
#-----------------------------------------------------------------------------
# Name : dirServicePassword
# Datatype : String
# Description : The password of the directory service user.
# You can also specify the password at the command prompt instead of here.
# Mandatory : YES, if the value of registerWithDirService is TRUE
#-----------------------------------------------------------------------------
dirServicePassword=
#-----------------------------------------------------------------------------
# Name : walletPassword
# Datatype : String
# Description : The password for wallet to created or modified.
# You can also specify the password at the command prompt instead of here.
# Mandatory : YES, if the value of registerWithDirService is TRUE
#-----------------------------------------------------------------------------
walletPassword=
#-----------------------------------------------------------------------------
# Name : listeners
# Datatype : String
# Description : Specifies list of listeners to register the database with.
# By default the database is configured for all the listeners specified in the
# $ORACLE_HOME/network/admin/listener.ora
# Valid values : The list should be comma separated like "listener1,listener2".
# Mandatory : NO
#-----------------------------------------------------------------------------
listeners=
#-----------------------------------------------------------------------------
# Name : variablesFile
# Datatype : String
# Description : Location of the file containing variable value pair
# Valid values : A valid file-system file. The variable value pair format in this file
# is <variable>=<value>. Each pair should be in a new line.
# Default value : None
# Mandatory : NO
#-----------------------------------------------------------------------------
variablesFile=
#-----------------------------------------------------------------------------
# Name : variables
# Datatype : String
# Description : comma separated list of name=value pairs. Overrides variables defined in variablefile and templates
# Default value : None
# Mandatory : NO
#-----------------------------------------------------------------------------
variables=
#-----------------------------------------------------------------------------
# Name : initParams
# Datatype : String
# Description : comma separated list of name=value pairs. Overrides initialization parameters defined in templates
# Default value : None
# Mandatory : NO
#-----------------------------------------------------------------------------
initParams=
#-----------------------------------------------------------------------------
# Name : sampleSchema
# Datatype : Boolean
# Description : Specifies whether or not to add the Sample Schemas to your database
# Valid values : TRUE FALSE
# Default value : FASLE
# Mandatory : No
#-----------------------------------------------------------------------------
sampleSchema=
#-----------------------------------------------------------------------------
# Name : memoryPercentage
# Datatype : String
# Description : percentage of physical memory for Oracle
# Default value : None
# Mandatory : NO
#-----------------------------------------------------------------------------
memoryPercentage=
#-----------------------------------------------------------------------------
# Name : databaseType
# Datatype : String
# Description : used for memory distribution when memoryPercentage specified
# Valid values : MULTIPURPOSE|DATA_WAREHOUSING|OLTP
# Default value : MULTIPURPOSE
# Mandatory : NO
#-----------------------------------------------------------------------------
databaseType=
#-----------------------------------------------------------------------------
# Name : automaticMemoryManagement
# Datatype : Boolean
# Description : flag to indicate Automatic Memory Management is used
# Valid values : TRUE/FALSE
# Default value : TRUE
# Mandatory : NO
#-----------------------------------------------------------------------------
automaticMemoryManagement=
#-----------------------------------------------------------------------------
# Name : totalMemory
# Datatype : String
# Description : total memory in MB to allocate to Oracle
# Valid values :
# Default value :
# Mandatory : NO
#-----------------------------------------------------------------------------
totalMemory=6553
错误记录
**
- 内存不够，这里也是swap 及 内核哪里，配置的太小了，有最低要求oracle结合你实际填写，我配置swap 10g
- 模版不对，忘记写建库的模版了，一般按照我写的这个模版就行
**
执行静默建库，如果说没有这个命令，就是你环境变量写错了，建议重写一下，或者切换到db_1目录下执行~
dbca -silent -responseFile XXX/response/dbca.rsp
记得耐心等待，出现这个基本就是成功了
1% 已完成
3% 已完成
11% 已完成
18% 已完成
26% 已完成
37% 已完成
正在创建并启动 Oracle 实例
40% 已完成
45% 已完成
50% 已完成
55% 已完成
56% 已完成
60% 已完成
62% 已完成
正在进行数据库创建
66% 已完成
70% 已完成
73% 已完成
85% 已完成
96% 已完成
100% 已完成
有关详细信息, 请参阅日志文件 "/home/app/oracle/cfgtoollogs/dbca/wang/wang.log"。
如果上一步执行成功的话，一般这一步没啥错误，有的话就自己根据错误日志百度吧~
验证是否安装建库成功
sqlplus / as sysdba
进入sqlplus后执行，结果应显示OPEN
select status from v$instance;
- 配监听
配置监听配置文件
vi XXX/database/response/netca.rsp
基本不用配置，默认即可，但是为了安装检查一下吧~
我的配置文件
######################################################################
## Copyright(c) 1998, 2016 Oracle Corporation. All rights reserved. ##
## ##
## Specify values for the variables listed below to customize your ##
## installation. ##
## ##
## Each variable is associated with a comment. The comment ##
## identifies the variable type. ##
## ##
## Please specify the values in the following format: ##
## ##
## Type Example ##
## String "Sample Value" ##
## Boolean True or False ##
## Number 1000 ##
## StringList {"String value 1","String Value 2"} ##
## ##
######################################################################
## ##
## This sample response file causes the Oracle Net Configuration ##
## Assistant (NetCA) to complete an Oracle Net configuration during ##
## a custom install of the Oracle12c server which is similar to ##
## what would be created by the NetCA during typical Oracle12c ##
## install. It also documents all of the NetCA response file ##
## variables so you can create your own response file to configure ##
## Oracle Net during an install the way you wish. ##
## ##
######################################################################
[GENERAL]
RESPONSEFILE_VERSION="12.2"
CREATE_TYPE="CUSTOM"
#-------------------------------------------------------------------------------
# Name : SHOW_GUI
# Datatype : Boolean
# Description: This variable controls appearance/suppression of the NetCA GUI,
# Pre-req : N/A
# Default : TRUE
# Note:
# This must be set to false in order to run NetCA in silent mode.
# This is a substitute of "/silent" flag in the NetCA command line.
# The command line flag has precedence over the one in this response file.
# This feature is present since 10.1.0.3.
#-------------------------------------------------------------------------------
#SHOW_GUI=false
#-------------------------------------------------------------------------------
# Name : LOG_FILE
# Datatype : String
# Description: If present, NetCA will log output to this file in addition to the
# standard out.
# Pre-req : N/A
# Default : NONE
# Note:
# This is a substitute of "/log" in the NetCA command line.
# The command line argument has precedence over the one in this response file.
# This feature is present since 10.1.0.3.
#-------------------------------------------------------------------------------
#LOG_FILE=""/oracle12cHome/network/tools/log/netca.log""
[oracle.net.ca]
#INSTALLED_COMPONENTS;StringList;list of installed components
# The possible values for installed components are:
# "net8","server","client","aso", "cman", "javavm"
INSTALLED_COMPONENTS={"server","net8","javavm"}
#INSTALL_TYPE;String;type of install
# The possible values for install type are:
# "typical","minimal" or "custom"
INSTALL_TYPE=""typical""
#LISTENER_NUMBER;Number;Number of Listeners
# A typical install sets one listener
LISTENER_NUMBER=1
#LISTENER_NAMES;StringList;list of listener names
# The values for listener are:
# "LISTENER","LISTENER1","LISTENER2","LISTENER3", ...
# A typical install sets only "LISTENER"
LISTENER_NAMES={"LISTENER"}
#LISTENER_PROTOCOLS;StringList;list of listener addresses (protocols and parameters separated by semicolons)
# The possible values for listener protocols are:
# "TCP;1521","TCPS;2484","NMP;ORAPIPE","IPC;IPCKEY","VI;1521"
# For multiple listeners, separate them with commas ex "TCP;1521","TCPS;2484"
# For multiple protocols in single listener, separate them with "&" ex "TCP;1521&TCPS;2484"
# A typical install sets only "TCP;1521"
LISTENER_PROTOCOLS={"TCP;1521"}
#LISTENER_START;String;name of the listener to start, in double quotes
LISTENER_START=""LISTENER""
#NAMING_METHODS;StringList;list of naming methods
# The possible values for naming methods are:
# LDAP, TNSNAMES, ONAMES, HOSTNAME, NOVELL, NIS, DCE
# A typical install sets only: "TNSNAMES","ONAMES","HOSTNAMES"
# or "LDAP","TNSNAMES","ONAMES","HOSTNAMES" for LDAP
NAMING_METHODS={"TNSNAMES","ONAMES","HOSTNAME"}
#NOVELL_NAMECONTEXT;String;Novell Directory Service name context, in double quotes
# A typical install does not use this variable.
#NOVELL_NAMECONTEXT = ""NAMCONTEXT""
#SUN_METAMAP;String; SUN meta map, in double quotes
# A typical install does not use this variable.
#SUN_METAMAP = ""MAP""
#DCE_CELLNAME;String;DCE cell name, in double quotes
# A typical install does not use this variable.
#DCE_CELLNAME = ""CELL""
#NSN_NUMBER;Number;Number of NetService Names
# A typical install sets one net service name
NSN_NUMBER=1
#NSN_NAMES;StringList;list of Net Service names
# A typical install sets net service name to "EXTPROC_CONNECTION_DATA"
NSN_NAMES={"EXTPROC_CONNECTION_DATA"}
#NSN_SERVICE;StringList;Oracle12c database's service name
# A typical install sets Oracle12c database's service name to "PLSExtProc"
NSN_SERVICE={"PLSExtProc"}
#NSN_PROTOCOLS;StringList;list of coma separated strings of Net Service Name protocol parameters
# The possible values for net service name protocol parameters are:
# "TCP;HOSTNAME;1521","TCPS;HOSTNAME;2484","NMP;COMPUTERNAME;ORAPIPE","VI;HOSTNAME;1521","IPC;IPCKEY"
# A typical install sets parameters to "IPC;EXTPROC"
NSN_PROTOCOLS={"TCP;HOSTNAME;1521"}
#SERVICEUSERPASSWORD;String;Windows service user password
# If the oracle home is installed as secure user, supply the password
#SERVICEUSERPASSWORD=""svcpassword""
- 安装监听
netca -silent -responseFile XXX/database/reponse/netca.rsp
正在对命令行参数进行语法分析:
参数"silent" = true
参数"responsefile" = /home/database/response/netca.rsp
完成对命令行参数进行语法分析。
Oracle Net Services 配置:
完成概要文件配置。
Oracle Net 监听程序启动:
正在运行监听程序控制:
/opt/app/oracle/product/11.2.0/db_1/bin/lsnrctl start LISTENER
监听程序控制完成。
监听程序已成功启动。
监听程序配置完成。
成功完成 Oracle Net Services 配置。退出代码是0
PS：路径一定要写绝对路径不然总是报错找不到配置文件
Oracle Net Configuration Assistant 在给定位置找不到响应文件。
Oracle Net Services 配置失败。退出代码是1
成功了的话
/成功运行后，在/opt/oracle/11.2.0/network/admin目录下生成sqlnet.ora和listener.ora两个文件。
//完成后通过命令“netstat -tlnp |grep 1521”可以查看到1521端口已开
错误记录
先检查是否安装成功了，如果是的话，在看下面 /XXX/oracle/11.2.0/network/admin 查看是否有这个 listener.ora
**
- 无法分配内存，类似这样的问题，嗯嗯~这个一般就是，hosts 配置不对 或者 listener.ora 里面不对
**
我的host,在etc/hosts
127.0.0.1 localhost
::1 localhost
xxx.xxx.xxx.xxx iZhp36a2vlldwiubuh9mtsZ
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
这可以多配置，具体可以查看相关介绍这部分的。我安装的时候就是多配置了几个来试错。
# listener.ora Network Configuration File: /ruitefiles/home/app/oracle/product/12c/db_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
)
)
基本上到这结束了，最后就是配置开机启动什么的
直接复制一个，看官你们自己试试，写这个文章的时候我还没弄开机启动。
/u01/app/oracle/product/12c/db_1/bin/dbstart
假如执行/u01/app/oracle/product/12c/db_1/bin/dbstart报错：
ORACLE_HOME_LISTNER is not SET, unable to auto-start Oracle Net Listener
Usage: /u01/app/oracle/oracle/product/10.2.0/db_1/bin/dbstart ORACLE_HOME
修改dbstart文件，将
ORACLE_HOME_LISTNER=$1
修改为
ORACLE_HOME_LISTNER=$ORACLE_HOME
修改/etc/oratab：
添加：
orcl:/u01/app/oracle/product/12c/db_1:Y
1
修改/etc/rc.d/rc.local
添加一行：
su oracle -lc /u01/app/oracle/product/12c/db_1/bin/dbstart
/u01/app/oracle/product/12c/dbhome_1为oracle的安装目录，要根据实际情况进行修改。
vim /etc/oratab
将
orcl:/u01/app/oracle/product/12c/db_1:Y
中的“N”改为“Y”
重启后，plsql连接数据库，sys/orcl
参考文章
https://www.cnblogs.com/jxzhao/p/7616814.html
https://blog.csdn.net/weixin_34357962/article/details/91726693
**
2019-09-26
补充说明，安装之后我是要从11g迁移数据到新装的12c数据库，结果导入dmp超慢，其中一个表是有34W数据能导了一早上，通过资料查询说是12c得优化数据库，这个优化只能是db管理员来弄，最终决定重置阿里云重新安装11g高版本。也防止后来客户现场出现数据问题。
**
最后
以上就是酷酷柚子为你收集整理的centos6.9 静默安装oracle 12c 版本号：Oracle Database 12c Release 2的全部内容，希望文章能够帮你解决centos6.9 静默安装oracle 12c 版本号：Oracle Database 12c Release 2所遇到的程序开发问题。
如果觉得靠谱客网站的内容还不错，欢迎将靠谱客网站推荐给程序员好友。
本图文内容来源于网友提供，作为学习参考使用，或来自网络收集整理，版权属于原作者所有。
发表评论 取消回复