实验目的

 实验步骤

1、配置VLAN

SW1:

[sw1]vlan batch 2 to 5
[sw1]int g0/0/1
[sw1-GigabitEthernet0/0/1]p l a
[sw1-GigabitEthernet0/0/1]p d vlan 2
[sw1-GigabitEthernet0/0/2]port hybrid pvid vlan 3
[sw1-GigabitEthernet0/0/2]port hybrid untagged vlan 3 to 5
[sw1-GigabitEthernet0/0/2]q
[sw1]int g0/0/4
[sw1-GigabitEthernet0/0/4]port link-type trunk 
[sw1-GigabitEthernet0/0/4]port trunk allow-pass vlan 2 to 5
[sw1-GigabitEthernet0/0/4]int g0/0/3
[sw1-GigabitEthernet0/0/3]port hybrid tagged vlan 2
[sw1-GigabitEthernet0/0/3]port hybrid untagged vlan 3 to 5

SW2:

[sw2]vlan batch 2 to 5
[sw2]int g0/0/2
[sw2-GigabitEthernet0/0/2]port link-type access 
[sw2-GigabitEthernet0/0/2]p d v 2
[sw2-GigabitEthernet0/0/3]port hybrid pvid vlan 4
[sw2-GigabitEthernet0/0/3]port hybrid untagged vlan 3 to 4
[sw2-GigabitEthernet0/0/3]int g0/0/1
[sw2-GigabitEthernet0/0/1]port trunk allow-pass vlan 2 to 5
[sw2-GigabitEthernet0/0/1]int g0/0/4
[sw2-GigabitEthernet0/0/4]port hybrid tagged vlan 2 to 5

SW3:

[sw3]vlan batch 2 to 5
Info: This operation may take a few seconds. Please wait for a moment...done.
[sw3]int g0/0/2
[sw3-GigabitEthernet0/0/2]port hy
[sw3-GigabitEthernet0/0/2]port hybrid pvid vlan 4
[sw3-GigabitEthernet0/0/2]port hybrid untagged vlan 3 to 4
[sw3-GigabitEthernet0/0/2]Int g0/0/3
[sw3-GigabitEthernet0/0/3]port hybrid pvid vlan 5
[sw3-GigabitEthernet0/0/3]port hybrid untagged vlan 3 5
[sw3-GigabitEthernet0/0/3]int g0/0/1  
[sw3-GigabitEthernet0/0/1]port link-type trunk 
[sw3-GigabitEthernet0/0/1]port trunk allow-pass vlan 2 to 5

2、配置路由器和DHCP

[r1]int g0/0/0
[r1-GigabitEthernet0/0/0]ip address 192.168.1.1 24
[r1-GigabitEthernet0/0/0]q
[r1]int g0/0/0.1
[r1-GigabitEthernet0/0/0.1]dot1q termination vid 2
[r1-GigabitEthernet0/0/0.1]ip address 192.168.2.1 24
[r1-GigabitEthernet0/0/0.1]arp broadcast enable 
[r1-GigabitEthernet0/0/0.1]q
[r1]dhcp enable 
Info: The operation may take a few seconds. Please wait for a moment.done.
[r1]ip pool v2
Info: It's successful to create an IP address pool.
[r1-ip-pool-v2]network 192.168.2.0 mask 24
[r1-ip-pool-v2]gateway-list 192.168.2.1
[r1-ip-pool-v2]dns-list 114.114.114.114 8.8.8.8
[r1-ip-pool-v2]q
[r1]ip pool v3
Info: It's successful to create an IP address pool.
[r1-ip-pool-v3]network 192.168.1.0 mask 24
[r1-ip-pool-v3]gateway-list 192.168.1.1
[r1-ip-pool-v3]dns-list 114.114.114.114 8.8.8.8
[r1-ip-pool-v3]q
[r1]int g0/0/0
[r1-GigabitEthernet0/0/0]dhcp select global 
[r1-GigabitEthernet0/0/0]int g0/0/0.1
[r1-GigabitEthernet0/0/0.1]dhcp select global

实验结果

最后

以上就是自信航空为你收集整理的HCIP VLAN 实验实验目的 实验步骤实验结果的全部内容，希望文章能够帮你解决HCIP VLAN 实验实验目的 实验步骤实验结果所遇到的程序开发问题。

如果觉得靠谱客网站的内容还不错，欢迎将靠谱客网站推荐给程序员好友。