/*  
 *  hello-1.c - The simplest kernel module.
 */
#include <linux/module.h>	/* Needed by all modules */
#include <linux/kernel.h>	/* Needed for KERN_ALERT */

int init_module(void)
{
	printk("<1>Hello world 1./n");

	/* 
	 * A non 0 return means init_module failed; module can't be loaded. 
	 */
	return 0;
}

void cleanup_module(void)
{
	printk(KERN_ALERT "Goodbye world 1./n");
}

obj-m += hello-1.o

/*  
 *  hello-2.c - Demonstrating the module_init() and module_exit() macros.
 *  This is preferred over using init_module() and cleanup_module().
 */
#include <linux/module.h>	/* Needed by all modules */
#include <linux/kernel.h>	/* Needed for KERN_ALERT */
#include <linux/init.h>		/* Needed for the macros */

static int __init hello_2_init(void)
{
	printk(KERN_ALERT "Hello, world 2/n");
	return 0;
}

static void __exit hello_2_exit(void)
{
	printk(KERN_ALERT "Goodbye, world 2/n");
}

module_init(hello_2_init);
module_exit(hello_2_exit);

obj-m += hello-1.o
obj-m += hello-2.o

/*  
 *  hello-3.c - Illustrating the __init, __initdata and __exit macros.
 */
#include <linux/module.h>	/* Needed by all modules */
#include <linux/kernel.h>	/* Needed for KERN_ALERT */
#include <linux/init.h>		/* Needed for the macros */

static int hello3_data __initdata = 3;

static int __init hello_3_init(void)
{
	printk(KERN_ALERT "Hello, world %d/n", hello3_data);
	return 0;
}

static void __exit hello_3_exit(void)
{
	printk(KERN_ALERT "Goodbye, world 3/n");
}

module_init(hello_3_init);
module_exit(hello_3_exit);

/*  
 *  hello-4.c - Demonstrates module documentation.
 */
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#define DRIVER_AUTHOR "Peter Jay Salzman <p@dirac.org>"
#define DRIVER_DESC   "A sample driver"

static int __init init_hello_4(void)
{
	printk(KERN_ALERT "Hello, world 4/n");
	return 0;
}

static void __exit cleanup_hello_4(void)
{
	printk(KERN_ALERT "Goodbye, world 4/n");
}

module_init(init_hello_4);
module_exit(cleanup_hello_4);

/*  
 *  You can use strings, like this:
 */

/* 
 * Get rid of taint message by declaring code as GPL. 
 */
MODULE_LICENSE("GPL");

/*
 * Or with defines, like this:
 */
MODULE_AUTHOR(DRIVER_AUTHOR);	/* Who wrote this module? */
MODULE_DESCRIPTION(DRIVER_DESC);	/* What does this module do */

/*  
 *  This module uses /dev/testdevice.  The MODULE_SUPPORTED_DEVICE macro might
 *  be used in the future to help automatic configuration of modules, but is 
 *  currently unused other than for documentation purposes.
 */
MODULE_SUPPORTED_DEVICE("testdevice");

/*
 *  hello-5.c - Demonstrates command line argument passing to a module.
 */
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/stat.h>

MODULE_LICENSE("GPL");
MODULE_AUTHOR("Peter Jay Salzman");

static short int myshort = 1;
static int myint = 420;
static long int mylong = 9999;
static char *mystring = "blah";

/* 
 * module_param(foo, int, 0000)
 * The first param is the parameters name
 * The second param is it's data type
 * The final argument is the permissions bits, 
 * for exposing parameters in sysfs (if non-zero) at a later stage.
 */

module_param(myshort, short, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP);
MODULE_PARM_DESC(myshort, "A short integer");
module_param(myint, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
MODULE_PARM_DESC(myint, "An integer");
module_param(mylong, long, S_IRUSR);
MODULE_PARM_DESC(mylong, "A long integer");
module_param(mystring, charp, 0000);
MODULE_PARM_DESC(mystring, "A character string");

static int __init hello_5_init(void)
{
	printk(KERN_ALERT "Hello, world 5/n=============/n");
	printk(KERN_ALERT "myshort is a short integer: %hd/n", myshort);
	printk(KERN_ALERT "myint is an integer: %d/n", myint);
	printk(KERN_ALERT "mylong is a long integer: %ld/n", mylong);
	printk(KERN_ALERT "mystring is a string: %s/n", mystring);
	return 0;
}

static void __exit hello_5_exit(void)
{
	printk(KERN_ALERT "Goodbye, world 5/n");
}

module_init(hello_5_init);
module_exit(hello_5_exit);

/*
 *  start.c - Illustration of multi filed modules
 */

#include <linux/kernel.h>	/* We're doing kernel work */
#include <linux/module.h>	/* Specifically, a module */

int init_module(void)
{
	printk("Hello, world - this is the kernel speaking/n");
	return 0;
}

/*
 *  stop.c - Illustration of multi filed modules
 */

#include <linux/kernel.h>	/* We're doing kernel work */
#include <linux/module.h>	/* Specifically, a module  */

void cleanup_module()
{
	printk("<1>Short is the life of a kernel module/n");
}

obj-m += hello-1.o
obj-m += hello-2.o
obj-m += hello-3.o
obj-m += hello-4.o
obj-m += hello-5.o
obj-m += startstop.o
startstop-objs := start.o stop.o

/*
 *  procfs.c -  create a "file" in /proc
 */

#include <linux/module.h>	/* Specifically, a module */
#include <linux/kernel.h>	/* We're doing kernel work */
#include <linux/proc_fs.h>	/* Necessary because we use the proc fs */

struct proc_dir_entry *Our_Proc_File;

/* Put data into the proc fs file.
 * 
 * Arguments
 * =========
 * 1. The buffer where the data is to be inserted, if
 *    you decide to use it.
 * 2. A pointer to a pointer to characters. This is
 *    useful if you don't want to use the buffer
 *    allocated by the kernel.
 * 3. The current position in the file
 * 4. The size of the buffer in the first argument.
 * 5. Write a "1" here to indicate EOF.
 * 6. A pointer to data (useful in case one common 
 *    read for multiple /proc/... entries)
 *
 * Usage and Return Value
 * ======================
 * A return value of zero means you have no further
 * information at this time (end of file). A negative
 * return value is an error condition.
 *
 * For More Information
 * ====================
 * The way I discovered what to do with this function
 * wasn't by reading documentation, but by reading the
 * code which used it. I just looked to see what uses
 * the get_info field of proc_dir_entry struct (I used a
 * combination of find and grep, if you're interested),
 * and I saw that  it is used in <kernel source
 * directory>/fs/proc/array.c.
 *
 * If something is unknown about the kernel, this is
 * usually the way to go. In Linux we have the great
 * advantage of having the kernel source code for
 * free - use it.
 */
ssize_t
procfile_read(char *buffer,
	      char **buffer_location,
	      off_t offset, int buffer_length, int *eof, void *data)
{
	printk(KERN_INFO "inside /proc/test : procfile_read/n");

	int len = 0;		/* The number of bytes actually used */
	static int count = 1;

	/* 
	 * We give all of our information in one go, so if the
	 * user asks us if we have more information the
	 * answer should always be no.
	 *
	 * This is important because the standard read
	 * function from the library would continue to issue
	 * the read system call until the kernel replies
	 * that it has no more information, or until its
	 * buffer is filled.
	 */
	if (offset > 0) {
		printk(KERN_INFO "offset %d : /proc/test : procfile_read, /
		       wrote %d Bytes/n", (int)(offset), len);
		*eof = 1;
		return len;
	}

	/* 
	 * Fill the buffer and get its length 
	 */
	len = sprintf(buffer,
		      "For the %d%s time, go away!/n", count,
		      (count % 100 > 10 && count % 100 < 14) ? "th" :
		      (count % 10 == 1) ? "st" :
		      (count % 10 == 2) ? "nd" :
		      (count % 10 == 3) ? "rd" : "th");
	count++;

	/* 
	 * Return the length 
	 */
	printk(KERN_INFO
	       "leaving /proc/test : procfile_read, wrote %d Bytes/n", len);
	return len;
}

int init_module()
{
	int rv = 0;
	Our_Proc_File = create_proc_entry("test", 0644, NULL);
	Our_Proc_File->read_proc = procfile_read;
	Our_Proc_File->owner = THIS_MODULE;
	Our_Proc_File->mode = S_IFREG | S_IRUGO;
	Our_Proc_File->uid = 0;
	Our_Proc_File->gid = 0;
	Our_Proc_File->size = 37;

	printk(KERN_INFO "Trying to create /proc/test:/n");

	if (Our_Proc_File == NULL) {
		rv = -ENOMEM;
		remove_proc_entry("test", &proc_root);
		printk(KERN_INFO "Error: Could not initialize /proc/test/n");
	} else {
		printk(KERN_INFO "Success!/n");
	}

	return rv;
}

void cleanup_module()
{
	remove_proc_entry("test", &proc_root);
	printk(KERN_INFO "/proc/test removed/n");
}

/* 
 *  procfs.c -  create a "file" in /proc, which allows both input and output.
 */
#include <linux/kernel.h>	/* We're doing kernel work */
#include <linux/module.h>	/* Specifically, a module */
#include <linux/proc_fs.h>	/* Necessary because we use proc fs */
#include <asm/uaccess.h>	/* for get_user and put_user */

/* 
 * Here we keep the last message received, to prove
 * that we can process our input 
 */
#define MESSAGE_LENGTH 80
static char Message[MESSAGE_LENGTH];
static struct proc_dir_entry *Our_Proc_File;

#define PROC_ENTRY_FILENAME "rw_test"

static ssize_t module_output(struct file *filp,	/* see include/linux/fs.h   */
			     char *buffer,	/* buffer to fill with data */
			     size_t length,	/* length of the buffer     */
			     loff_t * offset)
{
	static int finished = 0;
	int i;
	char message[MESSAGE_LENGTH + 30];

	/* 
	 * We return 0 to indicate end of file, that we have
	 * no more information. Otherwise, processes will
	 * continue to read from us in an endless loop. 
	 */
	if (finished) {
		finished = 0;
		return 0;
	}

	/* 
	 * We use put_user to copy the string from the kernel's
	 * memory segment to the memory segment of the process
	 * that called us. get_user, BTW, is
	 * used for the reverse. 
	 */
	sprintf(message, "Last input:%s", Message);
	for (i = 0; i < length && message[i]; i++)
		put_user(message[i], buffer + i);

	/* 
	 * Notice, we assume here that the size of the message
	 * is below len, or it will be received cut. In a real
	 * life situation, if the size of the message is less
	 * than len then we'd return len and on the second call
	 * start filling the buffer with the len+1'th byte of
	 * the message. 
	 */
	finished = 1;

	return i;		/* Return the number of bytes "read" */
}

static ssize_t
module_input(struct file *filp, const char *buff, size_t len, loff_t * off)
{
	int i;
	/* 
	 * Put the input into Message, where module_output
	 * will later be able to use it 
	 */
	for (i = 0; i < MESSAGE_LENGTH - 1 && i < len; i++)
		get_user(Message[i], buff + i);

	Message[i] = '/0';	/* we want a standard, zero terminated string */
	return i;
}

/* 
 * This function decides whether to allow an operation
 * (return zero) or not allow it (return a non-zero
 * which indicates why it is not allowed).
 *
 * The operation can be one of the following values:
 * 0 - Execute (run the "file" - meaningless in our case)
 * 2 - Write (input to the kernel module)
 * 4 - Read (output from the kernel module)
 *
 * This is the real function that checks file
 * permissions. The permissions returned by ls -l are
 * for referece only, and can be overridden here.
 */

static int module_permission(struct inode *inode, int op, struct nameidata *foo)
{
	/* 
	 * We allow everybody to read from our module, but
	 * only root (uid 0) may write to it 
	 */
	if (op == 4 || (op == 2 && current->euid == 0))
		return 0;

	/* 
	 * If it's anything else, access is denied 
	 */
	return -EACCES;
}

/* 
 * The file is opened - we don't really care about
 * that, but it does mean we need to increment the
 * module's reference count. 
 */
int module_open(struct inode *inode, struct file *file)
{
	try_module_get(THIS_MODULE);
	return 0;
}

/* 
 * The file is closed - again, interesting only because
 * of the reference count. 
 */
int module_close(struct inode *inode, struct file *file)
{
	module_put(THIS_MODULE);
	return 0;		/* success */
}

static struct file_operations File_Ops_4_Our_Proc_File = {
	.read = module_output,
	.write = module_input,
	.open = module_open,
	.release = module_close,
};

/* 
 * Inode operations for our proc file. We need it so
 * we'll have some place to specify the file operations
 * structure we want to use, and the function we use for
 * permissions. It's also possible to specify functions
 * to be called for anything else which could be done to
 * an inode (although we don't bother, we just put
 * NULL). 
 */

static struct inode_operations Inode_Ops_4_Our_Proc_File = {
	.permission = module_permission,	/* check for permissions */
};

/* 
 * Module initialization and cleanup 
 */
int init_module()
{
	int rv = 0;
	Our_Proc_File = create_proc_entry(PROC_ENTRY_FILENAME, 0644, NULL);
	Our_Proc_File->owner = THIS_MODULE;
	Our_Proc_File->proc_iops = &Inode_Ops_4_Our_Proc_File;
	Our_Proc_File->proc_fops = &File_Ops_4_Our_Proc_File;
	Our_Proc_File->mode = S_IFREG | S_IRUGO | S_IWUSR;
	Our_Proc_File->uid = 0;
	Our_Proc_File->gid = 0;
	Our_Proc_File->size = 80;

	if (Our_Proc_File == NULL) {
		rv = -ENOMEM;
		remove_proc_entry(PROC_ENTRY_FILENAME, &proc_root);
		printk(KERN_INFO "Error: Could not initialize /proc/test/n");
	}

	return rv;
}

void cleanup_module()
{
	remove_proc_entry(PROC_ENTRY_FILENAME, &proc_root);
}

/*
 *  chardev.c - Create an input/output character device
 */

#include <linux/kernel.h>	/* We're doing kernel work */
#include <linux/module.h>	/* Specifically, a module */
#include <linux/fs.h>
#include <asm/uaccess.h>	/* for get_user and put_user */

#include "chardev.h"
#define SUCCESS 0
#define DEVICE_NAME "char_dev"
#define BUF_LEN 80

/* 
 * Is the device open right now? Used to prevent
 * concurent access into the same device 
 */
static int Device_Open = 0;

/* 
 * The message the device will give when asked 
 */
static char Message[BUF_LEN];

/* 
 * How far did the process reading the message get?
 * Useful if the message is larger than the size of the
 * buffer we get to fill in device_read. 
 */
static char *Message_Ptr;

/* 
 * This is called whenever a process attempts to open the device file 
 */
static int device_open(struct inode *inode, struct file *file)
{
#ifdef DEBUG
	printk("device_open(%p)/n", file);
#endif

	/* 
	 * We don't want to talk to two processes at the same time 
	 */
	if (Device_Open)
		return -EBUSY;

	Device_Open++;
	/*
	 * Initialize the message 
	 */
	Message_Ptr = Message;
	try_module_get(THIS_MODULE);
	return SUCCESS;
}

static int device_release(struct inode *inode, struct file *file)
{
#ifdef DEBUG
	printk("device_release(%p,%p)/n", inode, file);
#endif

	/* 
	 * We're now ready for our next caller 
	 */
	Device_Open--;

	module_put(THIS_MODULE);
	return SUCCESS;
}

/* 
 * This function is called whenever a process which has already opened the
 * device file attempts to read from it.
 */
static ssize_t device_read(struct file *file,	/* see include/linux/fs.h   */
			   char __user * buffer,	/* buffer to be
							 * filled with data */
			   size_t length,	/* length of the buffer     */
			   loff_t * offset)
{
	/* 
	 * Number of bytes actually written to the buffer 
	 */
	int bytes_read = 0;

#ifdef DEBUG
	printk("device_read(%p,%p,%d)/n", file, buffer, length);
#endif

	/* 
	 * If we're at the end of the message, return 0
	 * (which signifies end of file) 
	 */
	if (*Message_Ptr == 0)
		return 0;

	/* 
	 * Actually put the data into the buffer 
	 */
	while (length && *Message_Ptr) {

		/* 
		 * Because the buffer is in the user data segment,
		 * not the kernel data segment, assignment wouldn't
		 * work. Instead, we have to use put_user which
		 * copies data from the kernel data segment to the
		 * user data segment. 
		 */
		put_user(*(Message_Ptr++), buffer++);
		length--;
		bytes_read++;
	}

#ifdef DEBUG
	printk("Read %d bytes, %d left/n", bytes_read, length);
#endif

	/* 
	 * Read functions are supposed to return the number
	 * of bytes actually inserted into the buffer 
	 */
	return bytes_read;
}

/* 
 * This function is called when somebody tries to
 * write into our device file. 
 */
static ssize_t
device_write(struct file *file,
	     const char __user * buffer, size_t length, loff_t * offset)
{
	int i;

#ifdef DEBUG
	printk("device_write(%p,%s,%d)", file, buffer, length);
#endif

	for (i = 0; i < length && i < BUF_LEN; i++)
		get_user(Message[i], buffer + i);

	Message_Ptr = Message;

	/* 
	 * Again, return the number of input characters used 
	 */
	return i;
}

/* 
 * This function is called whenever a process tries to do an ioctl on our
 * device file. We get two extra parameters (additional to the inode and file
 * structures, which all device functions get): the number of the ioctl called
 * and the parameter given to the ioctl function.
 *
 * If the ioctl is write or read/write (meaning output is returned to the
 * calling process), the ioctl call returns the output of this function.
 *
 */
int device_ioctl(struct inode *inode,	/* see include/linux/fs.h */
		 struct file *file,	/* ditto */
		 unsigned int ioctl_num,	/* number and param for ioctl */
		 unsigned long ioctl_param)
{
	int i;
	char *temp;
	char ch;

	/* 
	 * Switch according to the ioctl called 
	 */
	switch (ioctl_num) {
	case IOCTL_SET_MSG:
		/* 
		 * Receive a pointer to a message (in user space) and set that
		 * to be the device's message.  Get the parameter given to 
		 * ioctl by the process. 
		 */
		temp = (char *)ioctl_param;

		/* 
		 * Find the length of the message 
		 */
		get_user(ch, temp);
		for (i = 0; ch && i < BUF_LEN; i++, temp++)
			get_user(ch, temp);

		device_write(file, (char *)ioctl_param, i, 0);
		break;

	case IOCTL_GET_MSG:
		/* 
		 * Give the current message to the calling process - 
		 * the parameter we got is a pointer, fill it. 
		 */
		i = device_read(file, (char *)ioctl_param, 99, 0);

		/* 
		 * Put a zero at the end of the buffer, so it will be 
		 * properly terminated 
		 */
		put_user('/0', (char *)ioctl_param + i);
		break;

	case IOCTL_GET_NTH_BYTE:
		/* 
		 * This ioctl is both input (ioctl_param) and 
		 * output (the return value of this function) 
		 */
		return Message[ioctl_param];
		break;
	}

	return SUCCESS;
}

/* Module Declarations */

/* 
 * This structure will hold the functions to be called
 * when a process does something to the device we
 * created. Since a pointer to this structure is kept in
 * the devices table, it can't be local to
 * init_module. NULL is for unimplemented functions. 
 */
struct file_operations Fops = {
	.read = device_read,
	.write = device_write,
	.ioctl = device_ioctl,
	.open = device_open,
	.release = device_release,	/* a.k.a. close */
};

/* 
 * Initialize the module - Register the character device 
 */
int init_module()
{
	int ret_val;
	/* 
	 * Register the character device (atleast try) 
	 */
	ret_val = register_chrdev(MAJOR_NUM, DEVICE_NAME, &Fops);

	/* 
	 * Negative values signify an error 
	 */
	if (ret_val < 0) {
		printk("%s failed with %d/n",
		       "Sorry, registering the character device ", ret_val);
		return ret_val;
	}

	printk("%s The major device number is %d./n",
	       "Registeration is a success", MAJOR_NUM);
	printk("If you want to talk to the device driver,/n");
	printk("you'll have to create a device file. /n");
	printk("We suggest you use:/n");
	printk("mknod %s c %d 0/n", DEVICE_FILE_NAME, MAJOR_NUM);
	printk("The device file name is important, because/n");
	printk("the ioctl program assumes that's the/n");
	printk("file you'll use./n");

	return 0;
}

/* 
 * Cleanup - unregister the appropriate file from /proc 
 */
void cleanup_module()
{
	int ret;

	/* 
	 * Unregister the device 
	 */
	ret = unregister_chrdev(MAJOR_NUM, DEVICE_NAME);

	/* 
	 * If there's an error, report it 
	 */
	if (ret < 0)
		printk("Error in module_unregister_chrdev: %d/n", ret);
}

/*
 *  chardev.h - the header file with the ioctl definitions.
 *
 *  The declarations here have to be in a header file, because
 *  they need to be known both to the kernel module
 *  (in chardev.c) and the process calling ioctl (ioctl.c)
 */

#ifndef CHARDEV_H
#define CHARDEV_H

#include <linux/ioctl.h>

/* 
 * The major device number. We can't rely on dynamic 
 * registration any more, because ioctls need to know 
 * it. 
 */
#define MAJOR_NUM 100

/* 
 * Set the message of the device driver 
 */
#define IOCTL_SET_MSG _IOR(MAJOR_NUM, 0, char *)
/*
 * _IOR means that we're creating an ioctl command 
 * number for passing information from a user process
 * to the kernel module. 
 *
 * The first arguments, MAJOR_NUM, is the major device 
 * number we're using.
 *
 * The second argument is the number of the command 
 * (there could be several with different meanings).
 *
 * The third argument is the type we want to get from 
 * the process to the kernel.
 */

/* 
 * Get the message of the device driver 
 */
#define IOCTL_GET_MSG _IOR(MAJOR_NUM, 1, char *)
/* 
 * This IOCTL is used for output, to get the message 
 * of the device driver. However, we still need the 
 * buffer to place the message in to be input, 
 * as it is allocated by the process.
 */

/* 
 * Get the n'th byte of the message 
 */
#define IOCTL_GET_NTH_BYTE _IOWR(MAJOR_NUM, 2, int)
/* 
 * The IOCTL is used for both input and output. It 
 * receives from the user a number, n, and returns 
 * Message[n]. 
 */

/* 
 * The name of the device file 
 */
#define DEVICE_FILE_NAME "char_dev"

#endif

/*
 *  ioctl.c - the process to use ioctl's to control the kernel module
 *
 *  Until now we could have used cat for input and output.  But now
 *  we need to do ioctl's, which require writing our own process.
 */

/* 
 * device specifics, such as ioctl numbers and the
 * major device file. 
 */
#include "chardev.h"

#include <fcntl.h>		/* open */
#include <unistd.h>		/* exit */
#include <sys/ioctl.h>		/* ioctl */

/* 
 * Functions for the ioctl calls 
 */

ioctl_set_msg(int file_desc, char *message)
{
	int ret_val;

	ret_val = ioctl(file_desc, IOCTL_SET_MSG, message);

	if (ret_val < 0) {
		printf("ioctl_set_msg failed:%d/n", ret_val);
		exit(-1);
	}
}

ioctl_get_msg(int file_desc)
{
	int ret_val;
	char message[100];

	/* 
	 * Warning - this is dangerous because we don't tell
	 * the kernel how far it's allowed to write, so it
	 * might overflow the buffer. In a real production
	 * program, we would have used two ioctls - one to tell
	 * the kernel the buffer length and another to give
	 * it the buffer to fill
	 */
	ret_val = ioctl(file_desc, IOCTL_GET_MSG, message);

	if (ret_val < 0) {
		printf("ioctl_get_msg failed:%d/n", ret_val);
		exit(-1);
	}

	printf("get_msg message:%s/n", message);
}

ioctl_get_nth_byte(int file_desc)
{
	int i;
	char c;

	printf("get_nth_byte message:");

	i = 0;
	while (c != 0) {
		c = ioctl(file_desc, IOCTL_GET_NTH_BYTE, i++);

		if (c < 0) {
			printf
			    ("ioctl_get_nth_byte failed at the %d'th byte:/n",
			     i);
			exit(-1);
		}

		putchar(c);
	}
	putchar('/n');
}

/* 
 * Main - Call the ioctl functions 
 */
main()
{
	int file_desc, ret_val;
	char *msg = "Message passed by ioctl/n";

	file_desc = open(DEVICE_FILE_NAME, 0);
	if (file_desc < 0) {
		printf("Can't open device file: %s/n", DEVICE_FILE_NAME);
		exit(-1);
	}

	ioctl_get_nth_byte(file_desc);
	ioctl_get_msg(file_desc);
	ioctl_set_msg(file_desc, msg);

	close(file_desc);
}

/*
 *  syscall.c
 *
 *  System call "stealing" sample.
 */

/* 
 * Copyright (C) 2001 by Peter Jay Salzman 
 */

/* 
 * The necessary header files 
 */

/*
 * Standard in kernel modules 
 */
#include <linux/kernel.h>	/* We're doing kernel work */
#include <linux/module.h>	/* Specifically, a module, */
#include <linux/moduleparam.h>	/* which will have params */
#include <linux/unistd.h>	/* The list of system calls */

/* 
 * For the current (process) structure, we need
 * this to know who the current user is. 
 */
#include <linux/sched.h>
#include <asm/uaccess.h>

/* 
 * The system call table (a table of functions). We
 * just define this as external, and the kernel will
 * fill it up for us when we are insmod'ed
 *
 * sys_call_table is no longer exported in 2.6.x kernels.
 * If you really want to try this DANGEROUS module you will
 * have to apply the supplied patch against your current kernel
 * and recompile it.
 */
extern void *sys_call_table[];

/* 
 * UID we want to spy on - will be filled from the
 * command line 
 */
static int uid;
module_param(uid, int, 0644);

/* 
 * A pointer to the original system call. The reason
 * we keep this, rather than call the original function
 * (sys_open), is because somebody else might have
 * replaced the system call before us. Note that this
 * is not 100% safe, because if another module
 * replaced sys_open before us, then when we're inserted
 * we'll call the function in that module - and it
 * might be removed before we are.
 *
 * Another reason for this is that we can't get sys_open.
 * It's a static variable, so it is not exported. 
 */
asmlinkage int (*original_call) (const char *, int, int);

/* 
 * The function we'll replace sys_open (the function
 * called when you call the open system call) with. To
 * find the exact prototype, with the number and type
 * of arguments, we find the original function first
 * (it's at fs/open.c).
 *
 * In theory, this means that we're tied to the
 * current version of the kernel. In practice, the
 * system calls almost never change (it would wreck havoc
 * and require programs to be recompiled, since the system
 * calls are the interface between the kernel and the
 * processes).
 */
asmlinkage int our_sys_open(const char *filename, int flags, int mode)
{
	int i = 0;
	char ch;

	/* 
	 * Check if this is the user we're spying on 
	 */
	if (uid == current->uid) {
		/* 
		 * Report the file, if relevant 
		 */
		printk("Opened file by %d: ", uid);
		do {
			get_user(ch, filename + i);
			i++;
			printk("%c", ch);
		} while (ch != 0);
		printk("/n");
	}

	/* 
	 * Call the original sys_open - otherwise, we lose
	 * the ability to open files 
	 */
	return original_call(filename, flags, mode);
}

/* 
 * Initialize the module - replace the system call 
 */
int init_module()
{
	/* 
	 * Warning - too late for it now, but maybe for
	 * next time... 
	 */
	printk("I'm dangerous. I hope you did a ");
	printk("sync before you insmod'ed me./n");
	printk("My counterpart, cleanup_module(), is even");
	printk("more dangerous. If/n");
	printk("you value your file system, it will ");
	printk("be /"sync; rmmod/" /n");
	printk("when you remove this module./n");

	/* 
	 * Keep a pointer to the original function in
	 * original_call, and then replace the system call
	 * in the system call table with our_sys_open 
	 */
	original_call = sys_call_table[__NR_open];
	sys_call_table[__NR_open] = our_sys_open;

	/* 
	 * To get the address of the function for system
	 * call foo, go to sys_call_table[__NR_foo]. 
	 */

	printk("Spying on UID:%d/n", uid);

	return 0;
}

/* 
 * Cleanup - unregister the appropriate file from /proc 
 */
void cleanup_module()
{
	/* 
	 * Return the system call back to normal 
	 */
	if (sys_call_table[__NR_open] != our_sys_open) {
		printk("Somebody else also played with the ");
		printk("open system call/n");
		printk("The system may be left in ");
		printk("an unstable state./n");
	}

	sys_call_table[__NR_open] = original_call;
}

/* 
 *  print_string.c - Send output to the tty we're running on, regardless if it's
 *  through X11, telnet, etc.  We do this by printing the string to the tty
 *  associated with the current task.
 */
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/sched.h>	/* For current */
#include <linux/tty.h>		/* For the tty declarations */
#include <linux/version.h>	/* For LINUX_VERSION_CODE */

MODULE_LICENSE("GPL");
MODULE_AUTHOR("Peter Jay Salzman");

static void print_string(char *str)
{
	struct tty_struct *my_tty;

	/* 
	 * tty struct went into signal struct in 2.6.6 
	 */
#if ( LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,5) )
	/* 
	 * The tty for the current task 
	 */
	my_tty = current->tty;
#else
	/* 
	 * The tty for the current task, for 2.6.6+ kernels 
	 */
	my_tty = current->signal->tty;
#endif

	/* 
	 * If my_tty is NULL, the current task has no tty you can print to 
	 * (ie, if it's a daemon).  If so, there's nothing we can do.
	 */
	if (my_tty != NULL) {

		/* 
		 * my_tty->driver is a struct which holds the tty's functions,
		 * one of which (write) is used to write strings to the tty. 
		 * It can be used to take a string either from the user's or 
		 * kernel's memory segment.
		 *
		 * The function's 1st parameter is the tty to write to,
		 * because the same function would normally be used for all 
		 * tty's of a certain type.  The 2nd parameter controls whether
		 * the function receives a string from kernel memory (false, 0)
		 * or from user memory (true, non zero).  The 3rd parameter is
		 * a pointer to a string.  The 4th parameter is the length of
		 * the string.
		 */
		((my_tty->driver)->write) (my_tty,	/* The tty itself */
					   0,	/* Don't take the string 
						   from user space        */
					   str,	/* String                 */
					   strlen(str));	/* Length */

		/* 
		 * ttys were originally hardware devices, which (usually) 
		 * strictly followed the ASCII standard.  In ASCII, to move to
		 * a new line you need two characters, a carriage return and a
		 * line feed.  On Unix, the ASCII line feed is used for both 
		 * purposes - so we can't just use /n, because it wouldn't have
		 * a carriage return and the next line will start at the
		 * column right after the line feed.
		 *
		 * This is why text files are different between Unix and 
		 * MS Windows.  In CP/M and derivatives, like MS-DOS and 
		 * MS Windows, the ASCII standard was strictly adhered to,
		 * and therefore a newline requirs both a LF and a CR.
		 */
		((my_tty->driver)->write) (my_tty, 0, "/015/012", 2);
	}
}

static int __init print_string_init(void)
{
	print_string("The module has been inserted.  Hello world!");
	return 0;
}

static void __exit print_string_exit(void)
{
	print_string("The module has been removed.  Farewell world!");
}

module_init(print_string_init);
module_exit(print_string_exit);

/* 
 *  kbleds.c - Blink keyboard leds until the module is unloaded.
 */

#include <linux/module.h>
#include <linux/config.h>
#include <linux/init.h>
#include <linux/tty.h>		/* For fg_console, MAX_NR_CONSOLES */
#include <linux/kd.h>		/* For KDSETLED */
#include <linux/console_struct.h>	/* For vc_cons */

MODULE_DESCRIPTION("Example module illustrating the use of Keyboard LEDs.");
MODULE_AUTHOR("Daniele Paolo Scarpazza");
MODULE_LICENSE("GPL");

struct timer_list my_timer;
struct tty_driver *my_driver;
char kbledstatus = 0;

#define BLINK_DELAY   HZ/5
#define ALL_LEDS_ON   0x07
#define RESTORE_LEDS  0xFF

/*
 * Function my_timer_func blinks the keyboard LEDs periodically by invoking
 * command KDSETLED of ioctl() on the keyboard driver. To learn more on virtual 
 * terminal ioctl operations, please see file:
 *     /usr/src/linux/drivers/char/vt_ioctl.c, function vt_ioctl().
 *
 * The argument to KDSETLED is alternatively set to 7 (thus causing the led 
 * mode to be set to LED_SHOW_IOCTL, and all the leds are lit) and to 0xFF
 * (any value above 7 switches back the led mode to LED_SHOW_FLAGS, thus
 * the LEDs reflect the actual keyboard status).  To learn more on this, 
 * please see file:
 *     /usr/src/linux/drivers/char/keyboard.c, function setledstate().
 * 
 */

static void my_timer_func(unsigned long ptr)
{
	int *pstatus = (int *)ptr;

	if (*pstatus == ALL_LEDS_ON)
		*pstatus = RESTORE_LEDS;
	else
		*pstatus = ALL_LEDS_ON;

	(my_driver->ioctl) (vc_cons[fg_console].d->vc_tty, NULL, KDSETLED,
			    *pstatus);

	my_timer.expires = jiffies + BLINK_DELAY;
	add_timer(&my_timer);
}

static int __init kbleds_init(void)
{
	int i;

	printk(KERN_INFO "kbleds: loading/n");
	printk(KERN_INFO "kbleds: fgconsole is %x/n", fg_console);
	for (i = 0; i < MAX_NR_CONSOLES; i++) {
		if (!vc_cons[i].d)
			break;
		printk(KERN_INFO "poet_atkm: console[%i/%i] #%i, tty %lx/n", i,
		       MAX_NR_CONSOLES, vc_cons[i].d->vc_num,
		       (unsigned long)vc_cons[i].d->vc_tty);
	}
	printk(KERN_INFO "kbleds: finished scanning consoles/n");

	my_driver = vc_cons[fg_console].d->vc_tty->driver;
	printk(KERN_INFO "kbleds: tty driver magic %x/n", my_driver->magic);

	/*
	 * Set up the LED blink timer the first time
	 */
	init_timer(&my_timer);
	my_timer.function = my_timer_func;
	my_timer.data = (unsigned long)&kbledstatus;
	my_timer.expires = jiffies + BLINK_DELAY;
	add_timer(&my_timer);

	return 0;
}

static void __exit kbleds_cleanup(void)
{
	printk(KERN_INFO "kbleds: unloading.../n");
	del_timer(&my_timer);
	(my_driver->ioctl) (vc_cons[fg_console].d->vc_tty, NULL, KDSETLED,
			    RESTORE_LEDS);
}

module_init(kbleds_init);
module_exit(kbleds_cleanup);

/*
 *  sched.c - scheduale a function to be called on every timer interrupt.
 *
 *  Copyright (C) 2001 by Peter Jay Salzman
 */

/* 
 * The necessary header files 
 */

/* 
 * Standard in kernel modules 
 */
#include <linux/kernel.h>	/* We're doing kernel work */
#include <linux/module.h>	/* Specifically, a module */
#include <linux/proc_fs.h>	/* Necessary because we use the proc fs */
#include <linux/workqueue.h>	/* We scheduale tasks here */
#include <linux/sched.h>	/* We need to put ourselves to sleep 
				   and wake up later */
#include <linux/init.h>		/* For __init and __exit */
#include <linux/interrupt.h>	/* For irqreturn_t */

struct proc_dir_entry *Our_Proc_File;
#define PROC_ENTRY_FILENAME "sched"
#define MY_WORK_QUEUE_NAME "WQsched.c"

/* 
 * The number of times the timer interrupt has been called so far 
 */
static int TimerIntrpt = 0;

static void intrpt_routine(void *);

static int die = 0;		/* set this to 1 for shutdown */

/* 
 * The work queue structure for this task, from workqueue.h 
 */
static struct workqueue_struct *my_workqueue;

static struct work_struct Task;
static DECLARE_WORK(Task, intrpt_routine, NULL);

/* 
 * This function will be called on every timer interrupt. Notice the void*
 * pointer - task functions can be used for more than one purpose, each time
 * getting a different parameter.
 */
static void intrpt_routine(void *irrelevant)
{
	/* 
	 * Increment the counter 
	 */
	TimerIntrpt++;

	/* 
	 * If cleanup wants us to die
	 */
	if (die == 0)
		queue_delayed_work(my_workqueue, &Task, 100);
}

/* 
 * Put data into the proc fs file. 
 */
ssize_t
procfile_read(char *buffer,
	      char **buffer_location,
	      off_t offset, int buffer_length, int *eof, void *data)
{
	int len;		/* The number of bytes actually used */

	/* 
	 * It's static so it will still be in memory 
	 * when we leave this function
	 */
	static char my_buffer[80];

	static int count = 1;

	/* 
	 * We give all of our information in one go, so if the anybody asks us
	 * if we have more information the answer should always be no.
	 */
	if (offset > 0)
		return 0;

	/* 
	 * Fill the buffer and get its length 
	 */
	len = sprintf(my_buffer, "Timer called %d times so far/n", TimerIntrpt);
	count++;

	/* 
	 * Tell the function which called us where the buffer is 
	 */
	*buffer_location = my_buffer;

	/* 
	 * Return the length 
	 */
	return len;
}

/* 
 * Initialize the module - register the proc file 
 */
int __init init_module()
{
	int rv = 0;
	/* 
	 * Put the task in the work_timer task queue, so it will be executed at
	 * next timer interrupt
	 */
	my_workqueue = create_workqueue(MY_WORK_QUEUE_NAME);
	queue_delayed_work(my_workqueue, &Task, 100);

	Our_Proc_File = create_proc_entry(PROC_ENTRY_FILENAME, 0644, NULL);
	Our_Proc_File->read_proc = procfile_read;
	Our_Proc_File->owner = THIS_MODULE;
	Our_Proc_File->mode = S_IFREG | S_IRUGO;
	Our_Proc_File->uid = 0;
	Our_Proc_File->gid = 0;
	Our_Proc_File->size = 80;

	if (Our_Proc_File == NULL) {
		rv = -ENOMEM;
		remove_proc_entry(PROC_ENTRY_FILENAME, &proc_root);
		printk(KERN_INFO "Error: Could not initialize /proc/%s/n",
		       PROC_ENTRY_FILENAME);
	}

	return rv;
}

/* 
 * Cleanup
 */
void __exit cleanup_module()
{
	/* 
	 * Unregister our /proc file 
	 */
	remove_proc_entry(PROC_ENTRY_FILENAME, &proc_root);
	printk(KERN_INFO "/proc/%s removed/n", PROC_ENTRY_FILENAME);

	die = 1;		/* keep intrp_routine from queueing itself */
	cancel_delayed_work(&Task);	/* no "new ones" */
	flush_workqueue(my_workqueue);	/* wait till all "old ones" finished */
	destroy_workqueue(my_workqueue);

	/* 
	 * Sleep until intrpt_routine is called one last time. This is 
	 * necessary, because otherwise we'll deallocate the memory holding 
	 * intrpt_routine and Task while work_timer still references them.
	 * Notice that here we don't allow signals to interrupt us.
	 *
	 * Since WaitQ is now not NULL, this automatically tells the interrupt
	 * routine it's time to die.
	 */

}

/* 
 * some work_queue related functions
 * are just available to GPL licensed Modules 
 */
MODULE_LICENSE("GPL");