我是靠谱客的博主 悲凉云朵,最近开发中收集的这篇文章主要介绍LinuxCentOS7关于PV neme券显示[unknown]问题,觉得挺不错的,现在分享给大家,希望可以做个参考。

概述

LinuxCentOS7关于PV name券显示[unknown]问题


今天遇见了一个问题,就是本人想要扩展linux的分区容量时,创建的pv卷显示名称为[unknown]????
如下:

[root@bogon ~]# pvs
  WARNING: Device for PV NJQyPM-K2N8-vk2O-04IG-GmS8-IGxZ-FJt1rj not found or rejected by a filter.
  PV         VG     Fmt  Attr PSize   PFree
  /dev/sda2  centos lvm2 a--  <19.00g      0
  [unknown]  centos lvm2 a-m  <10.00g <10.00g

这个问题是啥东西啊?我也没有瞎胡创建还是怎么着啊,就是不能正常使用了。
使用pvremove告知如下:

[root@bogon ~]# pvremove [unknown]
  WARNING: Device for PV NJQyPM-K2N8-vk2O-04IG-GmS8-IGxZ-FJt1rj not found or rejected by a filter.
  Device [unknown] not found (or ignored by filtering).

????这下我就迷糊了,还不能删除。。。
告诉我什么找不到的意思,可是我查询明明是有的。
我又看了眼 发现vg name名称相同,会不会是重名导致的??于是我又vgrename :

[root@bogon ~]# vgrename centos centos01
  WARNING: Device for PV NJQyPM-K2N8-vk2O-04IG-GmS8-IGxZ-FJt1rj not found or rejected by a filter.
  Cannot change VG centos while PVs are missing.
  Consider vgreduce --removemissing.
  Cannot process volume group centos

瓦特???还是不行???
它上面让我使用vgreduce --removemissing. 来删除相关的vg卷
于是我照做:

[root@bogon ~]# vgreduce --removemissing centos
/dev/sda2  [unknown]
[root@bogon ~]# vgreduce --removemissing centos [unknown]
  Command does not accept argument: [unknown].

这也不行,这可咋整?????
我想是不是把这个分区给格式化了就能恢复?(我这个分区没有数据文件,诸位有数据文件的不要乱格式化。)

[root@bogon ~]# mkfs.ext4 /dev/sdb1
mke2fs 1.42.9 (28-Dec-2013)
文件系统标签=
OS type: Linux
块大小=4096 (log=2)
分块大小=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
1310720 inodes, 5242624 blocks
262131 blocks (5.00%) reserved for the super user
第一个数据块=0
Maximum filesystem blocks=2153775104
160 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
        32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
        4096000

Allocating group tables: 完成
正在写入inode表: 完成
Creating journal (32768 blocks): 完成
Writing superblocks and filesystem accounting information: 完成

[root@bogon ~]#
[root@bogon ~]# reboot
Connection to 192.168.67.128 closed by remote host.
Connection to 192.168.67.128 closed.

C:UsersAdministrator>ssh root@192.168.67.128
root@192.168.67.128's password:
Last login: Thu Apr 22 20:28:52 2021 from 192.168.67.1
[root@bogon ~]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:0c:29:9a:5b:e4 brd ff:ff:ff:ff:ff:ff
    inet 192.168.67.128/24 brd 192.168.67.255 scope global dynamic ens33
       valid_lft 1721sec preferred_lft 1721sec
    inet6 fe80::cca9:5adc:7217:6f3d/64 scope link
       valid_lft forever preferred_lft forever
3: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN qlen 1000
    link/ether 52:54:00:30:50:db brd ff:ff:ff:ff:ff:ff
    inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
       valid_lft forever preferred_lft forever
4: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state DOWN qlen 1000
    link/ether 52:54:00:30:50:db brd ff:ff:ff:ff:ff:ff
[root@bogon ~]# fdisk -l

磁盘 /dev/sda:21.5 GB, 21474836480 字节,41943040 个扇区
Units = 扇区 of 1 * 512 = 512 bytes
扇区大小(逻辑/物理):512 字节 / 512 字节
I/O 大小(最小/最佳):512 字节 / 512 字节
磁盘标签类型:dos
磁盘标识符:0x000ae533

   设备 Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048     2099199     1048576   83  Linux
/dev/sda2         2099200    41943039    19921920   8e  Linux LVM

磁盘 /dev/sdb:21.5 GB, 21474836480 字节,41943040 个扇区
Units = 扇区 of 1 * 512 = 512 bytes
扇区大小(逻辑/物理):512 字节 / 512 字节
I/O 大小(最小/最佳):512 字节 / 512 字节
磁盘标签类型:dos
磁盘标识符:0xfdaab170

   设备 Boot      Start         End      Blocks   Id  System
/dev/sdb1            2048    41943039    20970496   8e  Linux LVM

磁盘 /dev/mapper/centos-root:18.2 GB, 18249416704 字节,35643392 个扇区
Units = 扇区 of 1 * 512 = 512 bytes
扇区大小(逻辑/物理):512 字节 / 512 字节
I/O 大小(最小/最佳):512 字节 / 512 字节


磁盘 /dev/mapper/centos-swap:2147 MB, 2147483648 字节,4194304 个扇区
Units = 扇区 of 1 * 512 = 512 bytes
扇区大小(逻辑/物理):512 字节 / 512 字节
I/O 大小(最小/最佳):512 字节 / 512 字节

[root@bogon ~]# vgdisplay
  WARNING: Device for PV NJQyPM-K2N8-vk2O-04IG-GmS8-IGxZ-FJt1rj not found or rejected by a filter.
  --- Volume group ---
  VG Name               centos
  System ID
  Format                lvm2
  Metadata Areas        1
  Metadata Sequence No  4
  VG Access             read/write
  VG Status             resizable
  MAX LV                0
  Cur LV                2
  Open LV               2
  Max PV                0
  Cur PV                2
  Act PV                1
  VG Size               28.99 GiB
  PE Size               4.00 MiB
  Total PE              7422
  Alloc PE / Size       4863 / <19.00 GiB
  Free  PE / Size       2559 / <10.00 GiB
  VG UUID               CNxo7t-Tlzd-rUfJ-EfGP-2ui3-hu8b-f9xVFx

我格式化了空间又重新分区,敲了下vgdisplay 显示为Free PE还有10G空间。。。格式化空间也不好用。。。
准备放弃的时候有一条命令恢复了,就是根据PV的UUID来恢复不正常的pv卷名称:
我先查看PVUUID 可以用pvdisplay查看PVUUID

       yes (but full)
  PE Size               4.00 MiB
  Total PE              4863
  Free PE               0
  Allocated PE          4863
  PV UUID               UrT1kL-3iRj-c120-mRF5-SkbV-1ca1-m3SqfI

  --- Physical volume ---
  PV Name               /dev/sdb1
  VG Name               centos
  PV Size               <10.00 GiB / not usable 3.00 MiB
  Allocatable           yes
  PE Size               4.00 MiB
  Total PE              2559
  Free PE               2559
  Allocated PE          0
  PV UUID               NJQyPM-K2N8-vk2O-04IG-GmS8-IGxZ-FJt1rj

也可以查看/etc/lvm/backup/下生成的pv创建备份文件来找到PVUUID:

[root@bogon ~]# vim /etc/lvm/backup/centos

# Generated by LVM2 version 2.02.171(2)-RHEL7 (2017-05-03): Thu Apr 22 20:58:42 2021

contents = "Text Format Volume Group"
version = 1

description = "Created *after* executing 'vgrename centoss centos'"

creation_host = "bogon" # Linux bogon 3.10.0-693.el7.x86_64 #1 SMP Tue Aug 22 21:09:27 UTC 2017 x86_64
creation_time = 1619096322      # Thu Apr 22 20:58:42 2021

centos {
        id = "CNxo7t-Tlzd-rUfJ-EfGP-2ui3-hu8b-f9xVFx"
        seqno = 6
        format = "lvm2"                 # informational
        status = ["RESIZEABLE", "READ", "WRITE"]
        flags = []
        extent_size = 8192              # 4 Megabytes
        max_lv = 0
        max_pv = 0
        metadata_copies = 0

        physical_volumes {

                pv0 {
                        id = "UrT1kL-3iRj-c120-mRF5-SkbV-1ca1-m3SqfI"
                        device = "/dev/sda2"    # Hint only

                        status = ["ALLOCATABLE"]
                        flags = []
                                                         dev_size = 39843840     # 18.999 Gigabytes
                        pe_start = 2048
                        pe_count = 4863 # 18.9961 Gigabytes
                }

                pv1 {
                        id = "NJQyPM-K2N8-vk2O-04IG-GmS8-IGxZ-FJt1rj"
                        device = "/dev/sdb1"    # Hint only

                        status = ["ALLOCATABLE"]
                        flags = []
                        dev_size = 20969473     # 9.99902 Gigabytes
                        pe_start = 2048
                        pe_count = 2559 # 9.99609 Gigabytes
                }
        }                                                                     

拿着PVUUID 去恢复pvname名称:

[root@bogon ~]# pvcreate /dev/sdb1 -u NJQyPM-K2N8-vk2O-04IG-GmS8-IGxZ-FJt1rj --restorefile /etc/lvm/backup/centos
  Couldn't find device with uuid NJQyPM-K2N8-vk2O-04IG-GmS8-IGxZ-FJt1rj.
  WARNING: Device for PV NJQyPM-K2N8-vk2O-04IG-GmS8-IGxZ-FJt1rj not found or rejected by a filter.
WARNING: ext4 signature detected on /dev/sdb1 at offset 1080. Wipe it? [y/n]: y
  Wiping ext4 signature on /dev/sdb1.
  Physical volume "/dev/sdb1" successfully created.
[root@bogon ~]# pvs
  PV         VG     Fmt  Attr PSize   PFree
  /dev/sda2  centos lvm2 a--  <19.00g      0
  /dev/sdb1  centos lvm2 a--  <10.00g <10.00g

这里可以看见使用pvcreate指定有问题的pvuuid号重新生成pvname就回复了。。。我的天,真够麻烦的。。
一条命令 我找了半天都没找出恢复pvname的解决方法。。

最后

以上就是悲凉云朵为你收集整理的LinuxCentOS7关于PV neme券显示[unknown]问题的全部内容,希望文章能够帮你解决LinuxCentOS7关于PV neme券显示[unknown]问题所遇到的程序开发问题。

如果觉得靠谱客网站的内容还不错,欢迎将靠谱客网站推荐给程序员好友。

本图文内容来源于网友提供,作为学习参考使用,或来自网络收集整理,版权属于原作者所有。
点赞(42)

评论列表共有 0 条评论

立即
投稿
返回
顶部