iOS开发中对于摄像头的一些基本使用方法分享

137 阅读 0 评论 91 点赞

我是靠谱客的博主落寞柜子，最近开发中收集的这篇文章主要介绍iOS开发中对于摄像头的一些基本使用方法分享，觉得挺不错的，现在分享给大家，希望可以做个参考。

概述

在一些应用中，我们需要用到iOS设备的摄像头进行拍照，视频。并且从相册中选取我们需要的图片或者视频。
关于iOS摄像头和相册的应用，可以使用UIImagePickerController类来完成控制。

UIImagePickerController 这个类可以为大家提供照相的功能,以及图片,视频浏览的功能。

检查硬件是否安装有摄像头或者允许操作相册

复制代码代码如下:

#pragma mark - 摄像头和相册相关的公共类

// 判断设备是否有摄像头
- (BOOL) isCameraAvailable{
return [UIImagePickerController isSourceTypeAvailable:UIImagePickerControllerSourceTypeCamera];
}

// 前面的摄像头是否可用
- (BOOL) isFrontCameraAvailable{
return [UIImagePickerControllerisCameraDeviceAvailable:UIImagePickerControllerCameraDeviceFront];
}

// 后面的摄像头是否可用
- (BOOL) isRearCameraAvailable{
return [UIImagePickerControllerisCameraDeviceAvailable:UIImagePickerControllerCameraDeviceRear];
}

调用摄像头

复制代码代码如下:

- (BOOL) hasMultipleCameras {
NSArray *devices = [AVCaptureDevice devicesWithMediaType:AVMediaTypeVideo];
if (devices != nil && [devices count] > 1) return YES;
return NO;
}

- (AVCaptureDevice *)cameraWithPosition : (AVCaptureDevicePosition) position
{
NSArray *devices = [AVCaptureDevice devicesWithMediaType:AVMediaTypeVideo];
for (AVCaptureDevice *device in devices )
if ( device.position == position )
return device;

return nil ;
}

- (void) swapFrontAndBackCameras {
//check for available cameras!
if (![self hasMultipleCameras]) return;

//assumes session is running
NSArray *inputs = self.captureSession.inputs; //should only be one value!
for ( AVCaptureDeviceInput *captureDeviceInput in inputs ) {
AVCaptureDevice *device = captureDeviceInput.device ;
if ( [device hasMediaType:AVMediaTypeVideo ] ) {
AVCaptureDevicePosition position = device.position ;
AVCaptureDevice *newCamera = nil ;
AVCaptureDeviceInput *newInput = nil ;

if (position == AVCaptureDevicePositionFront)
newCamera = [self cameraWithPosition:AVCaptureDevicePositionBack];
else
newCamera = [self cameraWithPosition:AVCaptureDevicePositionFront];

[self initializeCaptureDevice:newCamera];
newInput = [AVCaptureDeviceInput deviceInputWithDevice:newCamera error:nil];

// beginConfiguration ensures that pending changes are not applied immediately
[self.captureSession beginConfiguration ];

[self.captureSession removeInput:captureDeviceInput]; //remove current
[self.captureSession addInput:newInput]; //add new

// Changes take effect once the outermost commitConfiguration is invoked.
[self.captureSession commitConfiguration];
break ;
}
}
}

上面的代码是使用前置摄像头和后置摄像头！