概述
etcd的简单使用
ETCD安装配置
安装
去https://github.com/coreos/etcd/releases/下载想要的版本解压etcd包
解压后进入目录，增加x权限
chmod +x etcd chmod +x etcdctl
并将etcd和etcdctl 复制到 /bin
配置启动
简单启动
./bin/etcd 这样就可以启动使用
集群配置
在两台机器上部署了简单的集群
192.168.231.130 192.168.231.132
在配置文件/etc/defalut/etcd 中增加：
ETCD_OPTS="-name infra0 -initial-advertise-peer-urls http://192.168.231.130:2380 -listen-peer-urls http://192.168.231.130:2380 -initial-cluster- token etcd-cluster-1 -initial-cluster infra0=http://192.168.231.130:2380,infra1=http://192.168.231.132:2380 -initial-cluster-state new"
也可用参数的方法
ETCD_INITIAL_CLUSTER="infra0=http://192.168.231.130:2380,infra1=http://192.168.231.132:2380" ETCD_INITIAL_CLUSTER_STATE=new
192.168.231.132机器上
ETCD_OPTS="-name infra1 -initial-advertise-peer-urls http://192.168.231.132:2380 -listen-peer-urls http://192.168.231.132:2380 -initial-cluster-token etcd-cluster-1 -initial-cluster infra0=http://192.168.231.130:2380,infra1=http://192.168.231.132:2380 -initial-cluster-state new"
参数解释
启动etcd进程后查看集群
etcdctl member list 27e6981eec74137d: name=infra0 peerURLs=http://192.168.231.130:2380 clientURLs=http://localhost:2379,http://localhost:4001 3955a9b061e52de1: name=infra1 peerURLs=http://192.168.231.132:2380 clientURLs=http://localhost:2379,http://localhost:4001
判断leader和followers
curl http://127.0.0.1:2379/v2/stats/leader {"leader":"27e6981eec74137d","followers":{"3955a9b061e52de1":{"latency":{"current":0.178536,"average":0.26406266231884085,"standardDeviation":0.3787246458449882,"minimum":0.084328,"maximum":10.527117},"counts":{"fail":0,"success":1380}}}}
协议
简单发送一个请求设置key值的请求
# curl -vvv http://127.0.0.1:2379/v2/keys/mykey -XPUT -d value="this is test" * Hostname was NOT found in DNS cache * Trying 127.0.0.1... * Connected to 127.0.0.1 (127.0.0.1) port 2379 (#0) > PUT /v2/keys/mykey HTTP/1.1 > User-Agent: curl/7.35.0 > Host: 127.0.0.1:2379 > Accept: */* > Content-Length: 18 > Content-Type: application/x-www-form-urlencoded > * upload completely sent off: 18 out of 18 bytes < HTTP/1.1 200 OK < Content-Type: application/json < X-Etcd-Cluster-Id: 69bc358c20384a4c < X-Etcd-Index: 16333 < X-Raft-Index: 87030 < X-Raft-Term: 117 < Date: Fri, 14 Aug 2015 01:39:39 GMT < Content-Length: 201 < {"action":"set","node":{"key":"/mykey","value":"this is test","modifiedIndex":16333,"createdIndex":16333},"prevNode":{"key":"/mykey","value":"this is test","modifiedIndex":14840,"createdIndex":14840}} * Connection #0 to host 127.0.0.1 left intact
http接口是rest api的风格
body里面字段详解：
- action: set 操作对应的是url的put，rest api的风格
- node.key: 设置的key值
- node.value: 设置的value值
- node.createdIndex: 唯一的整数，每当etcd有改变时，这个值也会发生变化. 不仅限于key值操作，包括增加和同步服务改变。这里要修改
- node.modifiedIndex: 和createdIndex类似，也是一个唯一证整数 set , delete , update , create , - compareAndSwap ， compareAndDelete 这些操作都会改变这个值，而get和watch 命令不会修改改变这个值
header字段详解：
X-Etcd-Cluster-Id: 69bc358c20384a4c
X-Etcd-Index: 16333
X-Raft-Index: 87030
X-Raft-Term: 117
- X-Etcd-Index 等同于createdIndex.
- X-Etcd-Index is the current etcd index when the watch starts, which means that the watched event may happen after X-Etcd-Index
- X-Raft-Index 类似etcd index，但是用于raft protocol
- X-Raft-Term is an integer that will increase whenever an etcd master election happens in the cluster. If this number is increasing rapidly, you may need to tune the election timeout. See the tuning section for details.
可以使用etcdctl简化操作
# etcdctl get mykey
this is test
基本操作
可以使用etcdctl或者url去执行手动操作
etcdctl几个有用的附加命令
- –debug 将指令的url显示出来
# etcdctl --debug get mykey Cluster-Endpoints: http://localhost:2379, http://localhost:2379, http://localhost:4001, http://localhost:4001 Curl-Example: curl -X GET http://localhost:2379/v2/keys/mykey?consistent=true&recursive=false&sorted=false this is test
- –output /-o 将输出以指定的方式显示出来
# etcdctl -o json get mykey {"action":"get","node":{"key":"/mykey","value":"12345","modifiedIndex":18134,"createdIndex":18134},"etcdIndex":18168,"raftIndex":96532,"raftTerm":124} # etcdctl get mykey 12345
查看版本
curl -L http://127.0.0.1:2379/version etcdctl –version # etcdctl --version etcdctl version 2.0.13
设定键值
etcdctl set key value curl -X PUT http://localhost:2379/v2/keys/key -d value=value
如想要创建一个{mykey，kkkkk}的键值
# etcdctl --debug -o json set mykey kkkkk Curl-Example: curl -X PUT http://localhost:2379/v2/keys/mykey -d value=kkkkk {"action":"set","node":{"key":"/mykey","value":"kkkkk","modifiedIndex":21283,"createdIndex":21283},"prevNode":{"key":"/mykey","value":"kkkkk","modifiedIndex":20087,"createdIndex":20087},"etcdIndex":21283,"raftIndex":112958,"raftTerm":149} # etcdctl --debug -o json get mykey Curl-Example: curl -X GET http://localhost:2379/v2/keys/mykey?consistent=true&recursive=false&sorted=false {"action":"get","node":{"key":"/mykey","value":"kkkkk","modifiedIndex":21283,"createdIndex":21283},"etcdIndex":21283,"raftIndex":112963,"raftTerm":149}
这里显示了前一个值，设置后再get返回的是最新的值
etcdctl mk key value也能起到创建并设置键值的作用，和set操作的区别主要是，不能对已存在的key进行创建的操作
# etcdctl --debug -o json mk aa 11 Curl-Example: curl -X PUT http://localhost:2379/v2/keys/aa?prevExist=false -d value=11 {"action":"create","node":{"key":"/aa","value":"11","modifiedIndex":21093,"createdIndex":21093},"etcdIndex":21093,"raftIndex":112010,"raftTerm":149} # etcdctl --debug -o json mk aa 22 Curl-Example: curl -X PUT http://localhost:2379/v2/keys/aa?prevExist=false -d value=22 Error: 105: Key already exists (/aa) [21098]
查看键值
etcdctl get key curl -X GET http://localhost:2379/v2/keys/key? etcdctl --debug -o json get mykey Cluster-Endpoints: http://localhost:2379, http://localhost:2379, http://localhost:4001, http://localhost:4001 Curl-Example: curl -X GET http://localhost:2379/v2/keys/mykey?consistent=true&recursive=false&sorted=false {"action":"get","node":{"key":"/mykey","value":"12345","modifiedIndex":18134,"createdIndex":18134},"etcdIndex":18661,"raftIndex":99095,"raftTerm":126}
查看键值
etcdctl rm key curl -X DELETE http://localhost:2379/v2/keys/key? # etcdctl --debug -o json rm mykey Cluster-Endpoints: http://localhost:2379, http://localhost:2379, http://localhost:4001, http://localhost:4001 Curl-Example: curl -X DELETE http://localhost:2379/v2/keys/mykey?dir=false&recursive=false {"action":"delete","node":{"key":"/mykey","modifiedIndex":18766,"createdIndex":18701},"prevNode":{"key":"/mykey","value":"kkkkk","modifiedIndex":18701,"createdIndex":18701},"etcdIndex":18766,"raftIndex":99607,"raftTerm":127} # etcdctl --debug -o json get mykey Cluster-Endpoints: http://localhost:2379, http://localhost:2379, http://localhost:4001, http://localhost:4001 Curl-Example: curl -X GET http://localhost:2379/v2/keys/mykey?consistent=true&recursive=false&sorted=false Error: 100: Key not found (/mykey) [18766]
设置键值的TTL
etcdctl set key value –ttl time
curl -X PUT http://localhost:2379/v2/keys/key -d value=value -d ttl=time
通过设置TTL可以让key值在规定时间过期，比如设置这个key的ttl为100
etcdctl --debug -o json set mykey ok --ttl 100 Cluster-Endpoints: http://localhost:2379, http://localhost:2379, http://localhost:4001, http://localhost:4001 Curl-Example: curl -X PUT http://localhost:2379/v2/keys/mykey -d value=ok -d ttl=100 {"action":"set","node":{"key":"/mykey","value":"ok","expiration":"2015-08-14T03:15:14.665295244Z","ttl":100,"modifiedIndex":19036,"createdIndex":19036},"etcdIndex":19036,"raftIndex":100957,"raftTerm":129}
过了几十秒查看,ttl减为23
# etcdctl --debug -o json get mykey Cluster-Endpoints: http://localhost:2379, http://localhost:2379, http://localhost:4001, http://localhost:4001 Curl-Example: curl -X GET http://localhost:2379/v2/keys/mykey?consistent=true&recursive=false&sorted=false {"action":"get","node":{"key":"/mykey","value":"ok","expiration":"2015-08-14T03:15:14.665295244Z","ttl":23,"modifiedIndex":19036,"createdIndex":19036},"etcdIndex":19077,"raftIndex":101148,"raftTerm":129}
当ttl减为0，这个key值就查询不到了
Error: 100: Key not found (/mykey) [19084]
目录的ttl设置方法和key的类似
监控键值的改动
etcdctl watch key curl -X GET http://localhost:2379/v2/keys/key?consistent=true&wait=true
监听键值的改动，然后输出信息， –after-index可以根据etcd-index来获取后续index对应的改动
etcdctl --debug watch mykey Cluster-Endpoints: http://localhost:2379, http://localhost:2379, http://localhost:4001, http://localhost:4001 Curl-Example: curl -X GET http://localhost:2379/v2/keys/mykey?consistent=true&wait=true
当监测到键值设置为kkkkk时打印
kkkkk
若etcdctl watch 带上–forever参数则会不退出一直监测键值的改动,比如这里检测到了set和delete操作
# etcdctl --debug -o json watch mykey --forever Curl-Example: curl -X GET http://localhost:2379/v2/keys/mykey?consistent=true&wait=true {"action":"set","node":{"key":"/mykey","value":"kkkkk","modifiedIndex":19656,"createdIndex":19656},"prevNode":{"key":"/mykey","value":"kkkkk","modifiedIndex":19645,"createdIndex":19645},"etcdIndex":19655,"raftIndex":104107,"raftTerm":131} Curl-Example: curl -X GET http://localhost:2379/v2/keys/mykeyconsistent=true&wait=true&waitIndex=19657 {"action":"delete","node":{"key":"/mykey","modifiedIndex":19661,"createdIndex":19656},"prevNode":{"key":"/mykey","value":"kkkkk","modifiedIndex":19656,"createdIndex":19656},"etcdIndex":19656,"raftIndex":104115,"raftTerm":131} Curl-Example: curl -X GET http://localhost:2379/v2/keys/mykey?consistent=true&wait=true&waitIndex=19662
对于目录类型的key可以用–recursive 来检测目录下的子keys的改动
同样可以用作监测的命令是exec-watch，相比watch，增加了监测到改动可以执行自定义的操作
etcdctl watch key command
# etcdctl exec-watch mykey -- sh -c 'echo hit' hit
目录相关的操作
etcdctl mkdir dirname
创建一个目录可以关联多个子keys，比如先建立一个名叫mydir的dir
etcdctl --debug -o json mkdir mydir Curl-Example: curl -X PUT http://localhost:2379/v2/keys/mydir?dir=true&prevExist=false
在这个dir下面可以建立多个keys
# etcdctl --debug -o json set /mydir/key1 11111 Curl-Example: curl -X PUT http://localhost:2379/v2/keys/mydir/key1 -d value=11111 {"action":"set","node":{"key":"/mydir/key1","value":"11111","modifiedIndex":20850,"createdIndex":20850},"etcdIndex":20850,"raftIndex":110723,"raftTerm":148} # etcdctl --debug -o json set /mydir/key2 22222 Curl-Example: curl -X PUT http://localhost:2379/v2/keys/mydir/key2 -d value=22222 {"action":"set","node":{"key":"/mydir/key2","value":"22222","modifiedIndex":20855,"createdIndex":20855},"etcdIndex":20855,"raftIndex":110747,"raftTerm":148}
可以用etcdctl ls dirname进行查看，得到该dir下面的2个key
# etcdctl --debug -o json ls /mydir Curl-Example: curl -X GET http://localhost:2379/v2/keys/mydir?consistent=true&recursive=false&sorted=false /mydir/key2 /mydir/key1
如果向目录名的路径 post一个value，那么在这个目录下面会自动用createdIndex创建一个key
# curl -X POST http://localhost:2379/v2/keys/mydir -d value=33333 {"action":"create","node":{"key":"/mydir/21442","value":"33333","modifiedIndex":21442,"createdIndex":21442}} # etcdctl --debug -o json ls /mydir Curl-Example: curl -X GET http://localhost:2379/v2/keys/mydir?consistent=true&recursive=false&sorted=false /mydir/key1 /mydir/key2 /mydir/21442
用rmdir 删除目录要保证目录下没有keys，不然会失败
# etcdctl --debug -o json rmdir mydir Curl-Example: curl -X DELETE http://localhost:2379/v2/keys/mydir?dir=true&recursive=false Error: 108: Directory not empty (/mydir) [21682]
若要将目录和keys都删除可以用rm指令
# etcdctl --debug -o json rm mydir --recursive=true Curl-Example: curl -X DELETE http://localhost:2379/v2/keys/mydir?dir=false&recursive=true # etcdctl --debug -o json ls /mydir Curl-Example: curl -X GET http://localhost:2379/v2/keys/mydir?consistent=true&recursive=false&sorted=false Error: 100: Key not found (/mydir) [21883]
状态查看
etcd分别提供了查看leader、自己以及store状态的接口
- 查看leader的状态
curl http://127.0.0.1:2379/v2/stats/leader {"leader":"27e6981eec74137d","followers":{"3955a9b061e52de1":{"latency":{"current":0.158241,"average":0.22540039942528703,"standardDeviation":0.17653730983599686,"minimum":0.087808,"maximum":1.988291},"counts":{"fail":0,"success":348}}}}
- 查看自己的状态
curl http://127.0.0.1:2379/v2/stats/self # curl http://127.0.0.1:2379/v2/stats/self {"name":"infra0","id":"27e6981eec74137d","state":"StateLeader","startTime":"2015-08-14T12:52:39.624477849+08:00","leaderInfo":{"leader":"27e6981eec74137d","uptime":"2m37.095030303s","startTime":"2015-08-14T12:55:31.332765166+08:00"},"recvAppendRequestCnt":429,"sendAppendRequestCnt":1064,"sendPkgRate":6.896118337343223,"sendBandwidthRate":1170.6850489473857}
- 查看store的状态
curl http://127.0.0.1:2379/v2/stats/store {"getsSuccess":13,"getsFail":2152,"setsSuccess":120,"setsFail":2,"deleteSuccess":6,"deleteFail":0,"updateSuccess":0,"updateFail":0,"createSuccess":961,"createFail":186,"compareAndSwapSuccess":19631,"compareAndSwapFail":296,"compareAndDeleteSuccess":0,"compareAndDeleteFail":0,"expireCount":849,"watchers":0}
其他接口以及更详尽的接口说明可以看官网说明
转载于:https://www.cnblogs.com/opama/p/5836674.html
最后
以上就是留胡子月饼为你收集整理的etcd的简单使用etcd的简单使用的全部内容，希望文章能够帮你解决etcd的简单使用etcd的简单使用所遇到的程序开发问题。
如果觉得靠谱客网站的内容还不错，欢迎将靠谱客网站推荐给程序员好友。
本图文内容来源于网友提供，作为学习参考使用，或来自网络收集整理，版权属于原作者所有。
发表评论 取消回复