概述
项目中碰到的情况，居然产生了20多G，把硬盘占满、服务Down掉。原因可能：出现过多内存泄漏,或者分配过多大内存等。解决方法：
1、进入was管理控制台，选择 应用程序服务器 > server1 > 进程定义 > Java 虚拟机，将"最大堆大小"改为768或1024以上（跟机器内存相关，你的机器最好有较大内存）。保存。
2、优化你的程序，减少要求分配较大内存的设计，优化数据连接池。
3、给was打补丁。ibm网站上有相关补丁下载，不过最好升级到同系列的最新版本
4、修改启动文件，使之不产生这些文件，设置如下：
2、优化你的程序，减少要求分配较大内存的设计，优化数据连接池。
3、给was打补丁。ibm网站上有相关补丁下载，不过最好升级到同系列的最新版本
4、修改启动文件，使之不产生这些文件，设置如下：
分析以上4中方法，只有方法2才是根本解决之道。
针对4，IBM网站上有详细阐述，特附如下：
http://www-1.ibm.com/support/docview.wss?uid=swg21140641
Out of Memory (Java heap) specific MustGather information
Set up for enabling heap dump file generation:
Set up for enabling heap dump file generation:
- For releases of V6.0:
- To set the Environment Entries from the administrative console, select the following:
Servers > Application Servers > server_name > Java and Process Management > Process Definition > Environment Entries > New
- Add the following Name and Value pairs:
Name Value IBM_HEAPDUMP true IBM_HEAP_DUMP true IBM_HEAPDUMPDIR your_directory IBM_HEAPDUMP_OUTOFMEMORY true IBM_JAVADUMP_OUTOFMEMORY true IBM_JAVA_HEAPDUMP_TEXT true
3. Make sure that you save changes to the master configuration. - To set the Environment Entries from the administrative console, select the following:
- For release V5.1.1:
- To set the Environment Entries from the administrative console, select the following:
Servers > Application Servers > server_name > Process Definition > Environment Entries > New
- Add the following Name and Value pairs:
Name Value IBM_HEAPDUMP true IBM_HEAP_DUMP true IBM_HEAPDUMPDIR your_directory IBM_HEAPDUMP_OUTOFMEMORY true IBM_JAVADUMP_OUTOFMEMORY true IBM_JAVA_HEAPDUMP_TEXT true
- Make sure that you save changes to the master configuration.
For releases of V5.0 and V5.1.0:- To set the Environment Entries from the administrative console, select the following:
Servers > Application Servers > server_name > Process Definition > Environment Entries > New
- Add the following Name and Value pairs:
Name Value IBM_HEAPDUMP true IBM_HEAP_DUMP true IBM_HEAPDUMPDIR your_directory IBM_HEAPDUMP_OUTOFMEMORY true IBM_JAVADUMP_OUTOFMEMORY true
- Make sure that you save changes to the master configuration.
- To set the Environment Entries from the administrative console, select the following:
- For releases of V4.0:
- To enable the heap dump, add the following lines to the top of the adminserver.bat file in the install_root/bin directory, after the call to setupCmdLine.bat:
call "%~dp0setupCmdLine.bat"
set IBM_HEAPDUMP=true
set IBM_HEAP_DUMP=true
set IBM_HEAPDUMP_OUTOFMEMORY=true
set IBM_JAVADUMP_OUTOFMEMORY=true
set IBM_HEAPDUMPDIR=directory_path
- When you start the administrative server, use the modified adminserver.bat file from a command prompt instead of using the Services panel.
- To enable the heap dump, add the following lines to the top of the adminserver.bat file in the install_root/bin directory, after the call to setupCmdLine.bat:
- Notes:
- The heap dump is written to the current directory, install_root/bin, or the directory specified by the IBM_HEAPDUMPDIR environment variable.
- The file that is generated is called heapdumppid.time in internal format txt. This file can be very large; allow for at least the maximum heap size. If the maximum heap is set to 512 MB, allow for .5 GB for the dump.
- Any version of WebSphere Application Server that is using the IBM JDK 1.3.1 SR5 or higher, and 1.4.X, will automatically generate heapdump and javacore files on an OutOfMemory condition. Adding the additional parameters will give you the option to manually generate heapdumps and also specify the directory in which to write the heapdump files. To manually generate heapdumps you will need to issue the WSADMIN command to generate javacore*.txt file. This will also produce a heapdump*.txt file.
- The heap dump is written to the current directory, install_root/bin, or the directory specified by the IBM_HEAPDUMPDIR environment variable.
When failure occurs:
- This mechanism uses the same signal handler as javacore processing, so do not haveDISABLE_JAVADUMP set as an environment variable.
- Follow instructions on enabling verbosegc in WebSphere Application Server.
- Delete all Application Server and FFDC log files, if possible. Back them up, if needed.
- Restart the Application Server.
- Wait for the OutOfMemoryError condition to occur. This should cause the generation of a heapdump.
- If you want to analyze the heapdump yourself, follow instructions to use IBM HeapAnalyzer toolfor analyzing JVM heap usage. If you do not want to analyze this yourself, proceed to step 8.
- Collect the following files:
- For releases of V6.0:
- The server.xml file located in the following directory:
install_rootprofilesprofile_nameconfigcells
cell_namenodesnode_nameserversserver_name
- Everything in the following directory:
install_rootprofilesprofile_namelogsserver_name
Specifically, the following logs are needed:- systemErr
- systemOut
- native_stderr
- native_stdout
- heapdump*.txt or heapdump*.phd
- javacore*.txt
- Everything in the following directory:
install_rootprofilesprofile_namelogsffdc
- All documents requested For all releases below.
- The server.xml file located in the following directory:
- For releases of V5.0 and V5.1:
- The server.xml file located in the following directory:
install_rootconfigcellsnodesnode_nameserversserver_name
Specifically, the following logs are needed:- systemErr
- systemOut
- native_stderr
- native_stdout
- heapdump*.txt or heapdump*.phd
- javacore*.txt
- Everything from the following directory:
install_rootlogsserver_name
- Everything from the following directory:
install_rootlogsffdc - All documents requested For all releases below.
- The server.xml file located in the following directory:
- For releases of V4.0 and V3.5:
- A XMLConfig full export.
- Everything from the following directory:
install_rootlogs
Specifically, the following log files are needed:- stderr
- stdout
- tracefile
- heapdump*.txt
- javacore*.txt
- All documents requested For all releases below.
- A XMLConfig full export.
- For all releases
- All javacore*.txt files that were created when OutOfMemory conditions occurred. Ifjavacore*.txt files were created, you can find them in the install_root,install_rootbin or in the configured working directory.
- Include the Application Server systemErr, systemOut, native_stderr, and native_stdout logs, if they are located in a different directory.
- List of all other software and version information on the system. For example, any databases, WebSphere MQ, and so forth.
- All javacore*.txt files that were created when OutOfMemory conditions occurred. Ifjavacore*.txt files were created, you can find them in the install_root,install_rootbin or in the configured working directory.
- For releases of V6.0:
- Follow instructions to send diagnostic information to IBM support.
最后
以上就是孤独香烟为你收集整理的Websphere产生大量javacore与heapdump文件的分析的全部内容，希望文章能够帮你解决Websphere产生大量javacore与heapdump文件的分析所遇到的程序开发问题。
如果觉得靠谱客网站的内容还不错，欢迎将靠谱客网站推荐给程序员好友。
本图文内容来源于网友提供，作为学习参考使用，或来自网络收集整理，版权属于原作者所有。
发表评论 取消回复