redhat+ipv6地址+网关配置

[root@localhost ~]# vi /etc/sysconfig/network-scripts/ifcfg-eth0

DEVICE=eth0
BOOTPROTO=none
BROADCAST=192.168.0.255
HWADDR=00:A0:D1:E4:03:32
IPADDR=192.168.0.1

# 你的IPv6地址
IPV6ADDR=2001:da8:3000::183
IPV6PREFIX=64
IPV6_AUTOCONF=no
NETMASK=255.255.255.0
NETWORK=192.168.0.0
ONBOOT=yes
TYPE=Ethernet

NETWORKING=yes
NETWORKING_IPV6=yes
HOSTNAME=localhost

# 你的IPv6网关
IPV6_DEFAULTGW=2001:da8:3000::1%eth0

Debian/Ubuntu

vi /etc/network/interfaces

# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
# The loopback interface
# automatically added when upgrading

auto lo
iface lo inet loopback
auto eth0
iface eth0 inet6 static
# 你的IPv6地址
address 2001:da8:3000::181
netmask 64
# 你的IPv6网关
up route -A inet6 add default gw 2001:da8:3000::1 dev $IFACE
iface eth0 inet static
address 192.168.0.1
netmask 255.255.255.0
up route add default gw 192.168.0.1 dev $IFACE

RedHat Linux下配置静态ipv6可以使用ifconfig

ifconfig eth0 inet6 add 2001:da8:9000::82/64

增加网关

ip -6 addr add 3ffe:ffff:0:f101::1/64 dev eth0

也可以使用ip命令来配置

ip -6 addr add 3ffe:ffff:0:f101::1/64 dev eth0

route -A inet6（可以查看ipv6的静态路由表）；
route -A inet6 add default gw 2001:250:3000:2:2c0:95ff:fee0:473f（在系统的静态路由表里面加上一条静态路由记录）

# /sbin/ip -6 route add 2000::/3 dev eth0 metric 1

# /sbin/route -A inet6 
# /sbin/ip -6 route del 2000::/3 via 3ffe:ffff:0:f101::1