DSP TMS320操作加密芯片源代码

83 阅读 0 评论 55 点赞

我是靠谱客的博主精明路人，最近开发中收集的这篇文章主要介绍DSP TMS320操作加密芯片源代码，觉得挺不错的，现在分享给大家，希望可以做个参考。

概述

DSP TMS320操作SMEC98SP加密芯片的事例代码,如果需要完整代码(包括加密芯片代码),请到中巨伟业 http://www.sinormous.com/download.html下载

//###########################################################################
//
// FILE: SMEC98SPforTMS320
//
// TITLE: SMEC98SP加密芯片在DSP中的应用
// 深圳市中巨伟业信息科技有限公司
// www.sinormous.com;
// Author:顾万水
// QQ:47583353

#include “DSP2833x_Device.h” // DSP2833x 头文件
#include “DSP2833x_Examples.h” // DSP2833x 例子相关头文件
#include

#include <stdlib.h>
#include “iic_smec98sp.h”
#include “smec98sp.h”

/*
1.获取SMEC98SP的UID号, 获取MCU随机数
2.验证PIN
3.内外部认证
4.SHA1=>前置数据^随机数
5.密文读
6.读数据
7.写数据
8.构造算法(PA口数据->密文送加密芯片, 密文返回)

如果直接引用,请将print的调试信息去除
*/

void SMEC_Test(void)
{
/*各种密钥,不会在I2C线路上传输,可以使用同一组.应该将密钥分散存储,防止主控芯片被破解后,被攻击者在二进制码中找到密钥 */
unsigned char InternalKey[16] = {0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09,0x0A,0x0B,0x0C,0x0D,0x0E,0x0F};//内部认证密钥,必须和SMEC98SP一致
unsigned char ExternalKey[16] = {0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x18,0x19,0x1A,0x1B,0x1C,0x1D,0x1E,0x1F};//外部认证密钥,必须和SMEC98SP一致
unsigned char SHA1_Key[16] = {0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27,0x28,0x29,0x2A,0x2B,0x2C,0x2D,0x2E,0x2F}; //哈希算法认证密钥,必须和SMEC98SP一致
unsigned char MKey[16] = {0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x37,0x38,0x39,0x3A,0x3B,0x3C,0x3D,0x3E,0x3F}; //主控密钥,用于产生过程密钥,必须和SMEC98SP一致
unsigned char Pin[8] = {0x55,0x66,0x77,0x88,0x99,0xaa,0xbb,0xcc}; //Pin认证密钥,必须和SMEC98SP一致

unsigned char bSmec98spUid[12] = {0};
//存放SMEC98SP的UID
unsigned short RandomSeek;
//随机数种子
unsigned char bRandom[8] = {0};
//存放随机数
unsigned char bSessionKey[8] = {0};
//存放过程密钥,过程密钥为临时产生的密钥
unsigned char bDataBuf[64] = {0};
unsigned char ret, bLen;
unsigned short i, j;
RandomSeek = (unsigned short)time(0);	//RandomSeek一定要使用随机的变量,否则主控MCU产生的随机数将是固定植
/*获取SMEC98SP的UID*/
ret = SMEC_GetUid(bSmec98spUid);
if(ret)
{
//printf("SMEC_GetUid -> Error !rn");
while(1);
}
//printf("SMEC_GetUid: ");
//PrintHex(bSmec98spUid, 12);
//printf("rn");
/*将随机数RandomSeek，再做一次随机处理(SMEC98SP的UID作绑定, 使得即使相同情况下,不同的SMEC98SP随机数种子也不同)*/
for(i = 0; i < 6; i += 2)
{
/*使RandomSeek与SMEC98SP的UID相关*/
j = (bSmec98spUid[i] << 8) + bSmec98spUid[i + 1];
RandomSeek ^= j;
}
srand(RandomSeek);
//printf("RandomSeek: %04x rn", RandomSeek);
/*PIN码验证*/
ret = SMEC_CheckPin(Pin, (unsigned char)sizeof(Pin));
if(ret)
{
//printf("SMEC_CheckPin -> Error !rn");
while(1);
}
//printf("SMEC_CheckPin OK !rn");
/*内部认证, 主控芯片对SMEC98SP加密芯片合法性判断*/
for(i = 0; i < 8; i ++)
{
bRandom[i] = (unsigned char) rand();
}
ret = SMEC_IntrAuth(InternalKey, bRandom);
if(ret)
{
//printf("SMEC_IntrAuth -> Error !rn");
while(1);
}
//printf("SMEC_IntrAuth OK !rn");
/*外部认证, SMEC98SP加密芯片对主控芯片合法性判断*/
ret = SMEC_ExtrAuth(ExternalKey);
if(ret)
{
//printf("SMEC_ExtrAuth -> Error !rn");
while(1);
}

// printf(“SMEC_ExtrAuth OK !rn”);

/*SHA1摘要算法认证, 数据长度可自己设定*/
for(i = 0; i < 16; i ++)
{
bDataBuf[i] = (unsigned char) rand();
//bDataBuf[i] = (unsigned char) i;
}
ret = SMEC_Sha1Auth(SHA1_Key, (unsigned char)sizeof(SHA1_Key), bDataBuf, 16);
if(ret)
{
//printf("SMEC_Sha1Auth -> Error !rn");
while(1);
}
//printf("SMEC_Sha1Auth OK !rn");
/*调用加密芯片内部计算圆周长算法*/
bDataBuf[0] = 0x02;
ret = SMEC_CircleAlg(bDataBuf, 1, bDataBuf, &bLen);
if(ret)
{
//printf("SMEC_CircleAlg -> Error !rn");
while(1);
}
//printf("SMEC_CircleAlg OK, C = %02x !rn", bDataBuf[0]);
/*产生过程密钥,用于后续的Flash数据加密读,及构造的"端口数据运算"*/
for(i = 0; i < 8; i ++)
{
bRandom[i] = (unsigned char) rand();
}
ret = SMEC_GenSessionKey(MKey, bRandom, bSessionKey);
if(ret)
{
//printf("SMEC_GenSessionKey -> Error !rn");
while(1);
}
//printf("SMEC_GenSessionKey OK !rn");
/*密文读取Flash数据*/
ret = SMEC_CryptReadFlash(bSessionKey, 0x0000, bDataBuf, 16);
if(ret)
{
//printf("SMEC_CryptReadFlash -> Error !rn");
while(1);
}
//printf("SMEC_CryptReadFlash OK:rn");
//PrintHex(bDataBuf, 16);
/*读取Flash数据*/
ret = SMEC_ReadFlash(0x0000, bDataBuf, 16);
if(ret)
{
//printf("SMEC_ReadFlash -> Error !rn");
while(1);
}
//printf("SMEC_ReadFlash OK:rn");
//PrintHex(bDataBuf, 16);
/*写Flash数据*/
for(i = 0; i < 16; i ++)
{
bDataBuf[i] = (unsigned char) i;
}
ret = SMEC_WriteFlash(0x0000, bDataBuf, 16);
if(ret)
{
//printf("SMEC_WriteFlash -> Error !rn");
while(1);
}
//printf("SMEC_WriteFlash OK!rn");
/*构造"端口数据运算", 可以用实际的PA~PC端口数据*/
bDataBuf[0] = 0x00;
bDataBuf[1] = 0x00;
ret = SMEC_GpioAlg(bSessionKey, bDataBuf,2, bDataBuf);
if(ret)
{
//printf("SMEC_GpioAlg -> Error !rn");
while(1);
}
//printf("SMEC_GpioAlg OK:rn");

// PrintHex(bDataBuf, 2);

/*调用加密芯片内部计算圆周长算法,并密文在线路上传输*/
bDataBuf[0] = 0x02;
ret = SMEC_CircleAlgCrypt(bSessionKey, bDataBuf, 1, bDataBuf, &bLen);
if(ret)
{
//printf("SMEC_CircleAlgCrypt -> Error !rn");
while(1);
}
//printf("SMEC_CircleAlg OK, C = %02x !rn", bDataBuf[0]);

}

void main(void)
{
InitSysCtrl();

SMEC_I2cInit();
SMEC_Test();

while(1);
}