1. 首页
  2. 文章中心
  3. Swift

Swift4.1转场动画实现侧滑抽屉效果

130 阅读 0 评论
我是靠谱客的博主 腼腆可乐，最近开发中收集的这篇文章主要介绍Swift4.1转场动画实现侧滑抽屉效果，觉得挺不错的，现在分享给大家，希望可以做个参考。

概述

本文实现使用了Modal转场动画，原因是项目多由导航控制器和标签控制器作为基类，为了不影响导航控制器的代理，转场动画使用模态交互。

代码使用SnapKit进行布局，能够适应屏幕旋转。手势速率大于300或进度超过30%的时候直接完成动画，否则动画回滚取消，具体数值可以修改对应的常量。抽屉出现的时候，主控制有遮罩，对应关键字是mask。

实现文件只有两个

DrawerControl：控制抽屉出现，一行代码即可调用

Animator：负责动画实现，包括了交互式的代理事件和非交互式的代理事件

//
// DrawerControl.swift
// PratiseSwift
//
// Created by EugeneLaw on 2018/7/31.
// Copyright © 2018年 EugeneLaw. All rights reserved.
//
 
import UIKit
 
enum DrawerSize {
 case Left
 case Right
}
 
class DrawerControl: NSObject {
 
 /**主页面*/
 var base: UIViewController?
 /**抽屉控制器*/
 var drawer: UIViewController?
 /**抽屉在左边还是右边，默认左边，没有实现右边，要右边自己去animator里面加判断*/
 var whichSize = DrawerSize.Left
 /**拖拽手势*/
 var panBase: UIPanGestureRecognizer?
 var panDrawer: UIPanGestureRecognizer?
 /**主页面在抽屉显示时保留的宽度*/
 var baseWidth: CGFloat {
 get {
 return self.animator!.baseWidth
 }
 set {
 self.animator?.baseWidth = newValue
 }
 }
 /**是否应该响应手势*/
 var shouldResponseRecognizer = false
 /**效果响应*/
 var animator: Animator?
 
 
 init(base: UIViewController, drawer: UIViewController) {
 super.init()
 self.base = base
 self.drawer = drawer
 animator = Animator(base: self.base!, drawer: self.drawer!)
 self.panBase = UIPanGestureRecognizer(target: self, action: #selector(panBaseAction(pan:)))
 base.view.addGestureRecognizer(self.panBase!)
 self.panDrawer = UIPanGestureRecognizer(target: self, action: #selector(panDrawerAction(pan:)))
 drawer.view.addGestureRecognizer(self.panDrawer!)
 self.drawer?.transitioningDelegate = self.animator
 }
 
 deinit {
 if self.panBase != nil {
 self.base?.view.removeGestureRecognizer(self.panBase!)
 self.panBase = nil
 }
 if self.panDrawer != nil {
 self.drawer?.view.removeGestureRecognizer(self.panDrawer!)
 self.panDrawer = nil
 }
 }
 
}
 
extension DrawerControl {
 
 ///显示抽屉
 func show() {
 if (self.base?.view.frame.origin.x)! > SCREEN_WIDTH/2 {
 return
 }
 self.animator?.interative = false
 self.base?.present(self.drawer!, animated: true, completion: nil)
 }
 
 ///关闭抽屉，或直接dismiss即可
 func close() {
 self.animator?.interative = false
 self.drawer?.dismiss(animated: true, completion: nil)
 }
 
}
 
extension DrawerControl {
 
 @objc func panBaseAction(pan: UIPanGestureRecognizer) {
 let transition = pan.translation(in: self.drawer?.view)
 let percentage = CGFloat(transition.x/SCREEN_WIDTH)
 let velocity = CGFloat(fabs(pan.velocity(in: self.drawer?.view).x))
 switch pan.state {
 case .began:
 if transition.x < 0 {
 shouldResponseRecognizer = false
 }else {
 shouldResponseRecognizer = true
 }
 if shouldResponseRecognizer {
 self.beginAnimator(showDrawer: true)
 }
 case .changed:
 if shouldResponseRecognizer {
 self.updateAnimator(percentage)
 }
 default:
 if shouldResponseRecognizer {
 self.cancelAnimator(percentage, velocity: velocity)
 }
 }
 }
 
 @objc func panDrawerAction(pan: UIPanGestureRecognizer) {
 let transition = pan.translation(in: self.drawer?.view)
 let percentage = CGFloat(-transition.x/SCREEN_WIDTH)
 let velocity = CGFloat(fabs(pan.velocity(in: self.drawer?.view).x))
 switch pan.state {
 case .began:
 if transition.x > 0 {
 shouldResponseRecognizer = false
 }else {
 shouldResponseRecognizer = true
 }
 if shouldResponseRecognizer {
 self.beginAnimator(showDrawer: false)
 }
 case .changed:
 if shouldResponseRecognizer {
 self.updateAnimator(percentage)
 }
 default:
 if shouldResponseRecognizer {
 self.cancelAnimator(percentage, velocity: velocity)
 }
 }
 }
 
 func beginAnimator(showDrawer: Bool) {
 self.animator?.interative = true
 if showDrawer {
 self.base?.transitioningDelegate = self.animator
 self.base?.present(self.drawer!, animated: true, completion: nil)
 }else {
 self.drawer?.transitioningDelegate = self.animator
 self.drawer?.dismiss(animated: true, completion: nil)
 }
 }
 
 func updateAnimator(_ percentage: CGFloat) {
 self.animator?.update(percentage)
 }
 
 func cancelAnimator(_ percentage: CGFloat, velocity: CGFloat) {
 if percentage < 0.3 && velocity < 300 {
 self.animator?.cancel()
 }else {
 self.animator?.finish()
 }
 }
 
}

//
// Animator.swift
// PratiseSwift
//
// Created by EugeneLaw on 2018/7/31.
// Copyright © 2018年 EugeneLaw. All rights reserved.
//
 
import UIKit
 
let DRAWER_ANIMATION_TIME = 0.3
 
class Animator: UIPercentDrivenInteractiveTransition, UIViewControllerTransitioningDelegate, UIViewControllerAnimatedTransitioning {
 
 /**是否交互转场*/
 var interative = false
 var showDrawer = false
 var base: UIViewController?
 var drawer:UIViewController?
 /**主页面在抽屉显示时保留的宽度*/
 var baseWidth: CGFloat = 100
 lazy var mask = { () -> UIButton in
 let mask = UIButton()
 mask.addTarget(self, action: #selector(maskClicked(_:)), for: .touchUpInside)
 return mask
 }()
 
 init(base: UIViewController, drawer: UIViewController) {
 super.init()
 self.base = base
 self.drawer = drawer
 UIDevice.current.beginGeneratingDeviceOrientationNotifications()
 NotificationCenter.default.addObserver(self, selector: #selector(observeDeviceOrientation(_:)), name: .UIDeviceOrientationDidChange, object: nil)
 }
 
 @objc func observeDeviceOrientation(_ notification: NSObject) {
 if let superView = self.base?.view.superview {
 if showDrawer {
 self.base?.view.snp.remakeConstraints({ (make) in
 make.width.equalTo(SCREEN_WIDTH)
 make.left.equalTo(superView.snp.right).offset(-self.baseWidth)
 make.top.bottom.equalTo(superView)
 })
 }else {
 self.base?.view.snp.remakeConstraints({ (make) in
 make.edges.equalTo(superView)
 })
 }
 superView.layoutIfNeeded()
 }
 }
 
 deinit {
 NotificationCenter.default.removeObserver(self)
 }
 
}
 
extension Animator {
 
 func animateTransition(using transitionContext: UIViewControllerContextTransitioning) {
 if showDrawer {
 let fromView = transitionContext.view(forKey: .from)
 addShadowToView(fromView!, color: .black, offset: CGSize(width: -1, height: 0), radius: 3, opacity: 0.1)
 let toView = transitionContext.view(forKey: .to)
 let containerView = transitionContext.containerView
 containerView.addSubview(toView!)
 containerView.addSubview(fromView!)
 fromView?.snp.remakeConstraints({ (make) in
 make.edges.equalTo(containerView)
 })
 toView?.snp.remakeConstraints({ (make) in
 make.edges.equalTo(containerView)
 })
 containerView.layoutIfNeeded()
 UIView.animate(withDuration: DRAWER_ANIMATION_TIME, animations: {
 fromView?.snp.remakeConstraints({ (make) in
 make.left.equalTo((toView?.snp.right)!).offset(-self.baseWidth)
 make.width.top.bottom.equalTo(toView!)
 })
 containerView.layoutIfNeeded()
 }) { (finish) in
 let cancel = transitionContext.transitionWasCancelled
 transitionContext.completeTransition(!cancel)
 if !cancel {//取消状态下区分添加到哪一个父视图，弄错会导致黑屏
 if self.drawer?.view.superview != nil {
 self.drawer?.view?.snp.remakeConstraints({ (make) in
 make.edges.equalTo((self.drawer?.view?.superview)!)
 })
 }
 self.showPartOfView()
 }else {
 fromView?.snp.remakeConstraints({ (make) in
 make.edges.equalTo((fromView?.superview)!)
 })
 }
 }
 }else {
 let fromView = transitionContext.view(forKey: .from)
 let toView = transitionContext.view(forKey: .to)
 addShadowToView(toView!, color: .black, offset: CGSize(width: -1, height: 0), radius: 3, opacity: 0.1)
 let containerView = transitionContext.containerView
 containerView.addSubview(fromView!)
 containerView.addSubview(toView!)
 fromView?.snp.remakeConstraints({ (make) in
 make.edges.equalTo(containerView)
 })
 toView?.snp.remakeConstraints({ (make) in
 make.left.equalTo(containerView.snp.right).offset(-self.baseWidth)
 make.width.equalTo(SCREEN_WIDTH)
 make.height.equalTo(SCREEN_HEIGHT)
 make.top.bottom.equalTo(containerView)
 })
 containerView.layoutIfNeeded()
 UIView.animate(withDuration: DRAWER_ANIMATION_TIME, animations: {
 toView?.snp.remakeConstraints({ (make) in
 make.edges.equalTo(containerView)
 })
 containerView.layoutIfNeeded()
 }) { (finish) in
 let cancel = transitionContext.transitionWasCancelled
 transitionContext.completeTransition(!cancel)
 toView?.snp.remakeConstraints({ (make) in
 make.edges.equalTo((toView?.superview)!)
 })
 if minX((self.base?.view)!) <= 0 {//判断结束时候是否回到主视图
 self.base?.view.isUserInteractionEnabled = true
 }
 }
 }
 }
 
 func transitionDuration(using transitionContext: UIViewControllerContextTransitioning?) -> TimeInterval {
 return DRAWER_ANIMATION_TIME
 }
 
 override func startInteractiveTransition(_ transitionContext: UIViewControllerContextTransitioning) {
 super.startInteractiveTransition(transitionContext)
 }
 
 func animationController(forPresented presented: UIViewController, presenting: UIViewController, source: UIViewController) -> UIViewControllerAnimatedTransitioning? {
 self.showDrawer = true
 return self
 }
 
 func animationController(forDismissed dismissed: UIViewController) -> UIViewControllerAnimatedTransitioning? {
 self.showDrawer = false
 return self
 }
 
 func interactionControllerForPresentation(using animator: UIViewControllerAnimatedTransitioning) -> UIViewControllerInteractiveTransitioning? {
 if interative {
 return self
 }else {
 return nil
 }
 }
 
 func interactionControllerForDismissal(using animator: UIViewControllerAnimatedTransitioning) -> UIViewControllerInteractiveTransitioning? {
 if interative {
 return self
 }else {
 return nil
 }
 }
 
}
 
 
extension Animator {
 
 func showPartOfView() {
 self.drawer?.view.addSubview((self.base?.view)!)
 self.base?.view.snp.remakeConstraints({ (make) in
 make.left.equalTo((self.drawer?.view.snp.right)!).offset(-self.baseWidth)
 make.top.bottom.equalTo((self.drawer?.view)!)
 make.width.equalTo(SCREEN_WIDTH)
 })
 //遮罩
 self.drawer?.view.insertSubview(mask, aboveSubview: (self.base?.view)!)
 self.base?.view.isUserInteractionEnabled = false//阻止交互
 mask.snp.remakeConstraints { (make) in
 make.left.equalTo((mask.superview?.snp.right)!).offset(-baseWidth)
 make.top.width.bottom.equalTo(mask.superview!);
 }
 self.drawer?.view.superview?.layoutIfNeeded()
 }
 
 @objc func maskClicked(_ button: UIButton) {
 button.removeFromSuperview()
 self.drawer?.dismiss(animated: true, completion: nil)
 }
 
}

按钮调用例子：（手势控制已经自动添加到主控制器和抽屉控制器的view上）

创建推出抽屉的控制类，参数分别是主控制器和抽屉控制器。在我自己的练习工程中，把这个控制类定义为总控制器（包括了导航控制器和标签控制器的控制类）的一个属性。创建这个抽屉控制类的时候，我把导航控制器（它的root是标签控制器）当做主控制器传给第一个参数。 

self.drawer = DrawerControl(base: self.navigation!, drawer: self.drawerPage)

调用的时候只需要使用抽屉控制类的show方法即可，练习工程中我把该按钮封装在导航菜单里面，它响应的时候会调用总控制器的单例，调用单例记录的抽屉控制器属性。

@objc func btnMenuClicked(_ button: UIButton) {
 TotalControl.instance().drawer?.show()
}

附录：用到的一些变量

//
// Headers.swift
// PratiseSwift
//
// Created by EugeneLaw on 2018/7/23.
// Copyright © 2018年 EugeneLaw. All rights reserved.
//
 
import UIKit
 
//MARK: 设备
let isRetina = (UIScreen.instancesRespond(to: #selector(getter: UIScreen.currentMode)) ? __CGSizeEqualToSize(CGSize(width: 640, height: 960), (UIScreen.main.currentMode?.size)!) : false)
let iPhone5 = (UIScreen.instancesRespond(to: #selector(getter: UIScreen.currentMode)) ? __CGSizeEqualToSize(CGSize(width: 640, height: 1136), (UIScreen.main.currentMode?.size)!) : false)
let iPhone6 = (UIScreen.instancesRespond(to: #selector(getter: UIScreen.currentMode)) ? __CGSizeEqualToSize(CGSize(width: 750, height: 1334), (UIScreen.main.currentMode?.size)!) : false)
let iPhone6Plus = (UIScreen.instancesRespond(to: #selector(getter: UIScreen.currentMode)) ? __CGSizeEqualToSize(CGSize(width: 1242, height: 2208), (UIScreen.main.currentMode?.size)!) : false)
let isPad = (UI_USER_INTERFACE_IDIOM() == UIUserInterfaceIdiom.pad)
let isPhone = (UI_USER_INTERFACE_IDIOM() == UIUserInterfaceIdiom.phone)
let isiPhoneX = (UIScreen.instancesRespond(to: #selector(getter: UIScreen.currentMode)) ? __CGSizeEqualToSize(CGSize(width: 1125, height: 2436), (UIScreen.main.currentMode?.size)!) : false)
 
//MARK: 界面
let TABBAR_HEIGHT = (isiPhoneX ? 83 : 49)
let NAVIGATION_HEIGHT = (isiPhoneX ? 88 : 64)
var SCREEN_WIDTH: CGFloat {
 get {
 return SCREEN_WIDTH_FUNC()
 }
}
var SCREEN_HEIGHT: CGFloat {
 get {
 return SCREEN_HEIGHT_FUNC()
 }
}
 
func SCREEN_WIDTH_FUNC() -> CGFloat {
 return UIScreen.main.bounds.size.width
}
 
func SCREEN_HEIGHT_FUNC() -> CGFloat {
 return UIScreen.main.bounds.size.height
}
 
//MARK: 颜色
let COLOR_WHITESMOKE = ColorHex("#F5F5F5")
 
/**
 *十六进制颜色值转换成UIColor
 *@param "#000000"
 */
func ColorHex(_ color: String) -> UIColor? {
 if color.count <= 0 || color.count != 7 || color == "(null)" || color == "<null>" {
 return nil
 }
 var red: UInt32 = 0x0
 var green: UInt32 = 0x0
 var blue: UInt32 = 0x0
 let redString = String(color[color.index(color.startIndex, offsetBy: 1)...color.index(color.startIndex, offsetBy: 2)])
 let greenString = String(color[color.index(color.startIndex, offsetBy: 3)...color.index(color.startIndex, offsetBy: 4)])
 let blueString = String(color[color.index(color.startIndex, offsetBy: 5)...color.index(color.startIndex, offsetBy: 6)])
 Scanner(string: redString).scanHexInt32(&red)
 Scanner(string: greenString).scanHexInt32(&green)
 Scanner(string: blueString).scanHexInt32(&blue)
 let hexColor = UIColor.init(red: CGFloat(red)/255.0, green: CGFloat(green)/255.0, blue: CGFloat(blue)/255.0, alpha: 1)
 return hexColor
}
 
/**
 *给图层添加阴影
 */
func addShadowToView(_ view: UIView, color: UIColor, offset: CGSize, radius: CGFloat, opacity: Float) {
 view.layer.shadowColor = color.cgColor
 view.layer.shadowOffset = offset
 view.layer.shadowOpacity = opacity
 view.layer.shadowRadius = radius
}
 
/**
 *计算图层的宽度
 */
func width(_ object: UIView) -> CGFloat {
 return object.frame.width
}
 
/**
 *在父视图中的x坐标
 */
func minX(_ object: UIView) -> CGFloat {
 return object.frame.origin.x
}
 
/**
 *在父视图中的x坐标+自身宽度
 */
func maxX(_ object: UIView) -> CGFloat {
 return object.frame.origin.x+width(object)
}
 
/**
 *在父视图中的y坐标
 */
func minY(_ object: UIView) -> CGFloat {
 return object.frame.origin.y
}
 
/**
 *在父视图中的y坐标+自身高度
 */
func maxY(_ object: UIView) -> CGFloat {
 return object.frame.origin.y+height(object)
}
 
/**
 *计算图层的高度
 */
func height(_ object: UIView) -> CGFloat {
 return object.frame.height
}

以上就是本文的全部内容，希望对大家的学习有所帮助，也希望大家多多支持靠谱客。

最后

以上就是腼腆可乐为你收集整理的Swift4.1转场动画实现侧滑抽屉效果的全部内容，希望文章能够帮你解决Swift4.1转场动画实现侧滑抽屉效果所遇到的程序开发问题。

如果觉得靠谱客网站的内容还不错，欢迎将靠谱客网站推荐给程序员好友。

本图文内容来源于网友提供，作为学习参考使用，或来自网络收集整理，版权属于原作者所有。
点赞(86)

相关文章

Swift学习教程之SQLite的基础使用
Swift学习教程之SQLite的基础使用
Swift 4.2使用self做为变量名浅析
Swift 4.2使用self做为变量名浅析
Swift5中从原始文本创建字符串的方法
Swift5中从原始文本创建字符串的方法
Swift如何使用类型擦除及自定义详解
Swift如何使用类型擦除及自定义详解
Swift4.1转场动画实现侧滑抽屉效果
Swift4.1转场动画实现侧滑抽屉效果
Swift使用CollectionView实现广告栏滑动效果
Swift使用CollectionView实现广告栏滑动效果
Swift枚举的一些小用法总结
Swift枚举的一些小用法总结
Swift中优雅处理闭包导致的循环引用详解
Swift中优雅处理闭包导致的循环引用详解

评论列表共有 0 条评论

立即
投稿
返回
顶部