一、本地系统环境检查

1.检查系统版本

[root@jeven ~]# cat /etc/centos-release
CentOS Linux release 7.6.1810 (Core)

2.检查系统内核版本

[root@jeven ~]# uname -r 
3.10.0-957.el7.x86_64

3.检查本地IP地址

[root@jeven ~]# ifconfig |grep -C 5 ens33
RX packets 0
bytes 0 (0.0 B)
RX errors 0
dropped 0
overruns 0
frame 0
TX packets 0
bytes 0 (0.0 B)
TX errors 0
dropped 0 overruns 0
carrier 0
collisions 0
ens33: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>
mtu 1500
inet 192.168.3.166
netmask 255.255.255.0
broadcast 192.168.3.255
inet6 fe80::8a83:7297:7cb8:9934
prefixlen 64
scopeid 0x20<link>
ether 00:0c:29:4f:3c:68
txqueuelen 1000
(Ethernet)
RX packets 1859420
bytes 2414510963 (2.2 GiB)
RX errors 0
dropped 0
overruns 0
frame 0

二、网卡子接口介绍

1.网卡子接口简介

在日常的运维工作当中，我们有时候需要在一块物理网卡上配置多个IP地址，这就是网卡子接口的概念。

2.网卡子接口的优点

打破物理网卡接口数量的限制，可以在一个接口中实现多个VLAN间的路由和通信。

3.网卡子接口的缺点

由于是多个子接口共用主接口，会让子接口性能比单个物理接口差，在网络流量过大，网络繁忙，会造成通信及网络流量瓶颈。

三 加载802.1q 模块

1.查看系统802.1q 模块信息

查看系统802.1q 模块信息

[root@jeven ~]# modinfo 8021q
filename:
/lib/modules/3.10.0-957.el7.x86_64/kernel/net/8021q/8021q.ko.xz
version:
1.8
license:
GPL
alias:
rtnl-link-vlan
retpoline:
Y
rhelversion:
7.6
srcversion:
931E6349BAB0ACE4D4A3A50
depends:
mrp,garp
intree:
Y
vermagic:
3.10.0-957.el7.x86_64 SMP mod_unload modversions
signer:
CentOS Linux kernel signing key
sig_key:
B7:0D:CF:0D:F2:D9:B7:F2:91:59:24:82:49:FD:6F:E8:7B:78:14:27
sig_hashalgo:
sha256

2.加载802.1q 模块

modprobe 8021q
### 加载模块

3.检查802.1q 模块加载状态

[root@jeven ~]#
lsmod | grep 8021q

8021q
33208
0
garp
14384
1 8021q
mrp
18542
1 8021q

四、配置网卡子接口

1.设置静态IP地址

将物理网卡地址由DHCP获取，设置为静态IP地址。

• 进入网卡配置文件目录

[root@jeven ~]# cd /etc/sysconfig/network-scripts/
[root@jeven network-scripts]# ls
ifcfg-ens33
ifdown-bnep
ifdown-ipv6
ifdown-routes
ifdown-tunnel
ifup-eth
ifup-isdn
ifup-ppp
ifup-TeamPort
network-functions
ifcfg-ens33.bak
ifdown-eth
ifdown-isdn
ifdown-sit
ifup
ifup-ib
ifup-plip
ifup-routes
ifup-tunnel
network-functions-ipv6
ifcfg-lo
ifdown-ib
ifdown-post
ifdown-Team
ifup-aliases
ifup-ippp
ifup-plusb
ifup-sit
ifup-wireless
ifdown
ifdown-ippp
ifdown-ppp
ifdown-TeamPort
ifup-bnep
ifup-ipv6
ifup-post
ifup-Team
init.ipv6-global

• 修改物理网卡配置文件

[root@jeven network-scripts]# cat ifcfg-ens33
TYPE=Ethernet
BOOTPROTO=static
DEFROUTE=yes
IPADDR=192.168.3.166
NETMASK=255.255.255.0
GATEWAY=192.168.3.254
DNS1=192.168.3.254
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
IPV6_ADDR_GEN_MODE=stable-privacy
NAME=ens33
UUID=ba415981-963e-4130-984a-8dd764f4bb70
DEVICE=ens33
ONBOOT=yes
ZONE=public

• 重启网卡

[root@jeven network-scripts]# service network restart 
Restarting network (via systemctl):
[
OK
]
[root@jeven network-scripts]# 

2.创建ens33:0配置文件

将ifcfg-ens33配置文件拷贝并改名为ifcfg-ens33:0文件

[root@jeven network-scripts]# ls
ifcfg-ens33
ifdown-bnep
ifdown-ipv6
ifdown-routes
ifdown-tunnel
ifup-eth
ifup-isdn
ifup-ppp
ifup-TeamPort
network-functions
ifcfg-ens33.bak
ifdown-eth
ifdown-isdn
ifdown-sit
ifup
ifup-ib
ifup-plip
ifup-routes
ifup-tunnel
network-functions-ipv6
ifcfg-lo
ifdown-ib
ifdown-post
ifdown-Team
ifup-aliases
ifup-ippp
ifup-plusb
ifup-sit
ifup-wireless
ifdown
ifdown-ippp
ifdown-ppp
ifdown-TeamPort
ifup-bnep
ifup-ipv6
ifup-post
ifup-Team
init.ipv6-global
[root@jeven network-scripts]# cp ifcfg-ens33 ifcfg-ens33:0
[root@jeven network-scripts]# ls
ifcfg-ens33
ifdown
ifdown-ippp
ifdown-ppp
ifdown-TeamPort
ifup-bnep
ifup-ipv6
ifup-post
ifup-Team
init.ipv6-global
ifcfg-ens33:0
ifdown-bnep
ifdown-ipv6
ifdown-routes
ifdown-tunnel
ifup-eth
ifup-isdn
ifup-ppp
ifup-TeamPort
network-functions
ifcfg-ens33.bak
ifdown-eth
ifdown-isdn
ifdown-sit
ifup
ifup-ib
ifup-plip
ifup-routes
ifup-tunnel
network-functions-ipv6
ifcfg-lo
ifdown-ib
ifdown-post
ifdown-Team
ifup-aliases
ifup-ippp
ifup-plusb
ifup-sit
ifup-wireless
[root@jeven network-scripts]# 

3.修改ens33:0文件

修改ifcfg-ens33:0文件,内容如下：

[root@jeven network-scripts]# cat ifcfg-ens33:0
TYPE=Ethernet
BOOTPROTO=static
IPADDR=192.168.3.33
NETMASK=255.255.255.0
GATEWAY=192.168.3.254
DNS1=192.168.3.254
DEVICE=ens33:0
ONBOOT=yes
ZONE=public

4.重启网卡

[root@jeven network-scripts]# service network restart 
Restarting network (via systemctl):
[
OK
]

5.查看子接口IP地址

查看子接口IP地址，可以看到网卡子接口配置已生效。

[root@jeven network-scripts]# ifconfig |grep ens33
ens33: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>
mtu 1500
ens33:0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>
mtu 1500
[root@jeven network-scripts]# ifconfig |grep -C 5 ens33
RX packets 0
bytes 0 (0.0 B)
RX errors 0
dropped 0
overruns 0
frame 0
TX packets 0
bytes 0 (0.0 B)
TX errors 0
dropped 0 overruns 0
carrier 0
collisions 0
ens33: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>
mtu 1500
inet 192.168.3.166
netmask 255.255.255.0
broadcast 192.168.3.255
inet6 fe80::8a83:7297:7cb8:9934
prefixlen 64
scopeid 0x20<link>
ether 00:0c:29:4f:3c:68
txqueuelen 1000
(Ethernet)
RX packets 1862362
bytes 2414734860 (2.2 GiB)
RX errors 0
dropped 0
overruns 0
frame 0
TX packets 850234
bytes 175051446 (166.9 MiB)
TX errors 0
dropped 0 overruns 0
carrier 0
collisions 0
ens33:0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>
mtu 1500
inet 192.168.3.33
netmask 255.255.255.0
broadcast 192.168.3.255
ether 00:0c:29:4f:3c:68
txqueuelen 1000
(Ethernet)
lo: flags=73<UP,LOOPBACK,RUNNING>
mtu 65536
inet 127.0.0.1
netmask 255.0.0.0
[root@jeven network-scripts]# 

五、测试网卡子接口

在其他服务器ping网卡子接口的IP地址进行测试连通性。

[root@server001 ~]# ifconfig
|grep ens33
[root@server001 ~]# ifconfig
|grep eth0
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>
mtu 1500
[root@server001 ~]# ifconfig
|grep -C 5eth0
grep: 5eth0: invalid context length argument
[root@server001 ~]# ifconfig
|grep -C5 eth0
RX packets 294460
bytes 34353514 (32.7 MiB)
RX errors 0
dropped 0
overruns 0
frame 0
TX packets 252317
bytes 47136565 (44.9 MiB)
TX errors 0
dropped 0 overruns 0
carrier 0
collisions 0
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>
mtu 1500
inet 192.168.3.158
netmask 255.255.255.0
broadcast 192.168.3.255
inet6 fd58:bc95:d4fb:0:38ab:86a1:2ba0:f65d
prefixlen 64
scopeid 0x0<global>
inet6 fe80::7b2d:77fb:1708:7edb
prefixlen 64
scopeid 0x20<link>
ether 52:54:00:a7:02:31
txqueuelen 1000
(Ethernet)
RX packets 3760871
bytes 600897760 (573.0 MiB)
[root@server001 ~]# ping 192.168.3.33 -c 12
PING 192.168.3.33 (192.168.3.33) 56(84) bytes of data.
64 bytes from 192.168.3.33: icmp_seq=1 ttl=64 time=108 ms
64 bytes from 192.168.3.33: icmp_seq=2 ttl=64 time=2.91 ms
64 bytes from 192.168.3.33: icmp_seq=3 ttl=64 time=2.64 ms
64 bytes from 192.168.3.33: icmp_seq=4 ttl=64 time=2.72 ms
64 bytes from 192.168.3.33: icmp_seq=5 ttl=64 time=2.94 ms
64 bytes from 192.168.3.33: icmp_seq=6 ttl=64 time=2.93 ms
64 bytes from 192.168.3.33: icmp_seq=7 ttl=64 time=2.85 ms
64 bytes from 192.168.3.33: icmp_seq=8 ttl=64 time=2.91 ms
64 bytes from 192.168.3.33: icmp_seq=9 ttl=64 time=2.86 ms
64 bytes from 192.168.3.33: icmp_seq=10 ttl=64 time=3.20 ms
64 bytes from 192.168.3.33: icmp_seq=11 ttl=64 time=3.12 ms
64 bytes from 192.168.3.33: icmp_seq=12 ttl=64 time=3.15 ms
--- 192.168.3.33 ping statistics ---
12 packets transmitted, 12 received, 0% packet loss, time 11016ms
rtt min/avg/max/mdev = 2.647/11.756/108.788/29.256 ms
```

最后

以上就是忧伤橘子为你收集整理的Linux系统之网卡子接口配置方法一、本地系统环境检查二、网卡子接口介绍三 加载802.1q 模块四、配置网卡子接口五、测试网卡子接口的全部内容，希望文章能够帮你解决Linux系统之网卡子接口配置方法一、本地系统环境检查二、网卡子接口介绍三 加载802.1q 模块四、配置网卡子接口五、测试网卡子接口所遇到的程序开发问题。

如果觉得靠谱客网站的内容还不错，欢迎将靠谱客网站推荐给程序员好友。