概述
sonicwall
一对一NAT配置实例（标准版）<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" />
假设拓扑：LAN 192.168.1.0/24 WAN 202.1.1.1，希望添加的内网邮件服务器 192.168.1.200，还拥有的公共地址 202.1.1.2。
配置步骤：
1、Network One-to-One NAT
2、Select Enable One-to-One NAT
3、Click Add. The Add NAT Entry window is displayed
4、Enter in the IP address, 192.168.1.200, in the Private Range Begin field.
5、 Enter in the IP address, 208.1.1.2, in the Public Range Begin field.
6、 Enter in <?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com:office:smarttags" />1 in the Range Length field.
7、Click OK.
8、Click Apply.
9、Click Firewall, then Access Rules.
10、Click Add.
11、Configure the following settings:
Action - Allow
Service - SMTP POP3
Source - WAN
Destination - LAN 192.168.1.200
In the Options tab, select always from the Apply this Rule menu.
12、Click OK.
配置步骤：
1、Network One-to-One NAT
2、Select Enable One-to-One NAT
3、Click Add. The Add NAT Entry window is displayed
4、Enter in the IP address, 192.168.1.200, in the Private Range Begin field.
5、 Enter in the IP address, 208.1.1.2, in the Public Range Begin field.
6、 Enter in <?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com:office:smarttags" />1 in the Range Length field.
7、Click OK.
8、Click Apply.
9、Click Firewall, then Access Rules.
10、Click Add.
11、Configure the following settings:
Action - Allow
Service - SMTP POP3
Source - WAN
Destination - LAN 192.168.1.200
In the Options tab, select always from the Apply this Rule menu.
12、Click OK.
转载于:https://blog.51cto.com/bluecoat/72301
最后
以上就是火星上枕头为你收集整理的sonicwall一对一NAT配置实例（标准版）的全部内容，希望文章能够帮你解决sonicwall一对一NAT配置实例（标准版）所遇到的程序开发问题。
如果觉得靠谱客网站的内容还不错，欢迎将靠谱客网站推荐给程序员好友。
本图文内容来源于网友提供，作为学习参考使用，或来自网络收集整理，版权属于原作者所有。
发表评论 取消回复